Electrochemical degradation of Reactive Black 5 using PbO2and graphite carbon nitride modified steel electrodes
Elektrohemijska degradacija Reactive Black 5 pomocu celicnih elektroda modifikovanih PbO2 i grafitnim ugljen-nitridom
2022
Аутори
Marković, Aleksandar S.Savić, Slađana D.
Ognjanović, Miloš
Roglić, Goran M.
Stanković, Dalibor
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Elektrode modifikovane kompozitom PbO2 sa grafitnim ugljen-nitridom (GCN) upotrebljene su za elekrohemijsku degradaciju tekstilne boje Reactive Black 5. Modifikovana čelična elektroda je korišćena kao anoda, a kao katoda čista čelična elektroda. Ispitan je uticaj strukture PbO2 na elektrokatalitičke karakteristike elektroda. Morfologija materijala je ispitana SEM-om, TEM-om i XRD-om, dok su elektrohemijske osobine ispitane uz pomoć CV i EIS merenja. Efikasnost degradacije je praćena UV-Vis spektrofotometrijom i tečnom hromatografijom. Pri optimalnim parametrima pH, koncentracije pomoćnog elektrolita, jačine struje i koncentracije ispitivane boje, najbolji rezultati su dobijeni sa elektrodom gde je cetiltrimetilamonijum-bromid (CTAB) korišćen kao templat za sintezu PbO2. Pod ovim uslovima je postignuta potpuna degradacija nakon 60 min tretmana, a proizvodi degradacije su određeni korišćenjem HPLC-MS/MS metode.
Electrodes modified by PbO2 and graphite carbon nitride (GCN) composite were used for electrochemical degradation of Reactive Black 5 textile dye. A modified steel electrode was used as the anode, while a pure steel electrode was used as the cathode. The influence of PbO2 structre on electrocatalytic characteristics of electrodes was investigated. The morphology of the material was examined by SEM, TEM and XRD, while the electrochemical properties were analyzed using means of CV and EIS measurements. The degradation efficiency was monitored by UV-Vis spectrophotometry and liquid chromatography. At optimal pH parameters, supporting electrolyte concentration, current strength and test dye concentration, the best results were obtained with an electrode where cetyl trimethyl ammonium bromide (CTAB) was used as a template for PbO2 synthesis. Under these conditions, complete degradation was achieved after 60 min of treatment, and degradation products were determined using the HPLC-MS/MS meth...od.
Кључне речи:
GCN / optimal electrochemical degradation / textile dye / grafitni ugljenik-nitrid / optimalna elektrohemijska degradacija / tekstilna bojaИзвор:
58. Savetovanje Srpskog hemijskog društva, Kratki izvodi radova, Beograd 9. i 10. jun 2022. godine, 2022, 58, 165-165Издавач:
- Beograd : Srpsko hemijsko društvo
Напомена:
Повезане информације:
- Верзија документа
https://hdl.handle.net/21.15107/rcub_cherry_6059
Колекције
Институција/група
Hemijski fakultet / Faculty of ChemistryTY - CONF AU - Marković, Aleksandar S. AU - Savić, Slađana D. AU - Ognjanović, Miloš AU - Roglić, Goran M. AU - Stanković, Dalibor PY - 2022 UR - http://cherry.chem.bg.ac.rs/handle/123456789/6058 AB - Elektrode modifikovane kompozitom PbO2 sa grafitnim ugljen-nitridom (GCN) upotrebljene su za elekrohemijsku degradaciju tekstilne boje Reactive Black 5. Modifikovana čelična elektroda je korišćena kao anoda, a kao katoda čista čelična elektroda. Ispitan je uticaj strukture PbO2 na elektrokatalitičke karakteristike elektroda. Morfologija materijala je ispitana SEM-om, TEM-om i XRD-om, dok su elektrohemijske osobine ispitane uz pomoć CV i EIS merenja. Efikasnost degradacije je praćena UV-Vis spektrofotometrijom i tečnom hromatografijom. Pri optimalnim parametrima pH, koncentracije pomoćnog elektrolita, jačine struje i koncentracije ispitivane boje, najbolji rezultati su dobijeni sa elektrodom gde je cetiltrimetilamonijum-bromid (CTAB) korišćen kao templat za sintezu PbO2. Pod ovim uslovima je postignuta potpuna degradacija nakon 60 min tretmana, a proizvodi degradacije su određeni korišćenjem HPLC-MS/MS metode. AB - Electrodes modified by PbO2 and graphite carbon nitride (GCN) composite were used for electrochemical degradation of Reactive Black 5 textile dye. A modified steel electrode was used as the anode, while a pure steel electrode was used as the cathode. The influence of PbO2 structre on electrocatalytic characteristics of electrodes was investigated. The morphology of the material was examined by SEM, TEM and XRD, while the electrochemical properties were analyzed using means of CV and EIS measurements. The degradation efficiency was monitored by UV-Vis spectrophotometry and liquid chromatography. At optimal pH parameters, supporting electrolyte concentration, current strength and test dye concentration, the best results were obtained with an electrode where cetyl trimethyl ammonium bromide (CTAB) was used as a template for PbO2 synthesis. Under these conditions, complete degradation was achieved after 60 min of treatment, and degradation products were determined using the HPLC-MS/MS method. PB - Beograd : Srpsko hemijsko društvo C3 - 58. Savetovanje Srpskog hemijskog društva, Kratki izvodi radova, Beograd 9. i 10. jun 2022. godine T1 - Electrochemical degradation of Reactive Black 5 using PbO2and graphite carbon nitride modified steel electrodes T1 - Elektrohemijska degradacija Reactive Black 5 pomocu celicnih elektroda modifikovanih PbO2 i grafitnim ugljen-nitridom IS - 58 SP - 165 EP - 165 UR - https://hdl.handle.net/21.15107/rcub_cherry_6058 ER -
@conference{ author = "Marković, Aleksandar S. and Savić, Slađana D. and Ognjanović, Miloš and Roglić, Goran M. and Stanković, Dalibor", year = "2022", abstract = "Elektrode modifikovane kompozitom PbO2 sa grafitnim ugljen-nitridom (GCN) upotrebljene su za elekrohemijsku degradaciju tekstilne boje Reactive Black 5. Modifikovana čelična elektroda je korišćena kao anoda, a kao katoda čista čelična elektroda. Ispitan je uticaj strukture PbO2 na elektrokatalitičke karakteristike elektroda. Morfologija materijala je ispitana SEM-om, TEM-om i XRD-om, dok su elektrohemijske osobine ispitane uz pomoć CV i EIS merenja. Efikasnost degradacije je praćena UV-Vis spektrofotometrijom i tečnom hromatografijom. Pri optimalnim parametrima pH, koncentracije pomoćnog elektrolita, jačine struje i koncentracije ispitivane boje, najbolji rezultati su dobijeni sa elektrodom gde je cetiltrimetilamonijum-bromid (CTAB) korišćen kao templat za sintezu PbO2. Pod ovim uslovima je postignuta potpuna degradacija nakon 60 min tretmana, a proizvodi degradacije su određeni korišćenjem HPLC-MS/MS metode., Electrodes modified by PbO2 and graphite carbon nitride (GCN) composite were used for electrochemical degradation of Reactive Black 5 textile dye. A modified steel electrode was used as the anode, while a pure steel electrode was used as the cathode. The influence of PbO2 structre on electrocatalytic characteristics of electrodes was investigated. The morphology of the material was examined by SEM, TEM and XRD, while the electrochemical properties were analyzed using means of CV and EIS measurements. The degradation efficiency was monitored by UV-Vis spectrophotometry and liquid chromatography. At optimal pH parameters, supporting electrolyte concentration, current strength and test dye concentration, the best results were obtained with an electrode where cetyl trimethyl ammonium bromide (CTAB) was used as a template for PbO2 synthesis. Under these conditions, complete degradation was achieved after 60 min of treatment, and degradation products were determined using the HPLC-MS/MS method.", publisher = "Beograd : Srpsko hemijsko društvo", journal = "58. Savetovanje Srpskog hemijskog društva, Kratki izvodi radova, Beograd 9. i 10. jun 2022. godine", title = "Electrochemical degradation of Reactive Black 5 using PbO2and graphite carbon nitride modified steel electrodes, Elektrohemijska degradacija Reactive Black 5 pomocu celicnih elektroda modifikovanih PbO2 i grafitnim ugljen-nitridom", number = "58", pages = "165-165", url = "https://hdl.handle.net/21.15107/rcub_cherry_6058" }
Marković, A. S., Savić, S. D., Ognjanović, M., Roglić, G. M.,& Stanković, D.. (2022). Electrochemical degradation of Reactive Black 5 using PbO2and graphite carbon nitride modified steel electrodes. in 58. Savetovanje Srpskog hemijskog društva, Kratki izvodi radova, Beograd 9. i 10. jun 2022. godine Beograd : Srpsko hemijsko društvo.(58), 165-165. https://hdl.handle.net/21.15107/rcub_cherry_6058
Marković AS, Savić SD, Ognjanović M, Roglić GM, Stanković D. Electrochemical degradation of Reactive Black 5 using PbO2and graphite carbon nitride modified steel electrodes. in 58. Savetovanje Srpskog hemijskog društva, Kratki izvodi radova, Beograd 9. i 10. jun 2022. godine. 2022;(58):165-165. https://hdl.handle.net/21.15107/rcub_cherry_6058 .
Marković, Aleksandar S., Savić, Slađana D., Ognjanović, Miloš, Roglić, Goran M., Stanković, Dalibor, "Electrochemical degradation of Reactive Black 5 using PbO2and graphite carbon nitride modified steel electrodes" in 58. Savetovanje Srpskog hemijskog društva, Kratki izvodi radova, Beograd 9. i 10. jun 2022. godine, no. 58 (2022):165-165, https://hdl.handle.net/21.15107/rcub_cherry_6058 .