Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials
Autori
Đukić, DunjaŠuljagić, Marija
Anđelković, Ljubica
Pavlović, Vera
Bučevac, Dušan
Vrbica, Boško
Mirković, Miljana
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The effect of Ca2+ amount and sintering temperature on mechanical properties of
geopolymer-brushite (GPB) binders was investigated. Brushite and raw abandoned kaolinite
clay thermally transformed into metakaolin were used for GPB synthesis. The complete phase
and structural analyses were performed by X-ray powder diffraction, and Fourier transforms
infrared spectroscopy (FT-IR). The pore-filling effect as a consequence of Ca2+ ions
incorporation into the hybrid geopolymer networks improved the compressive strength. On
the other hand, the chosen biscuit sintering at 800 and 900o
C caused the phase
transformation of brushite into calcium pyrophosphate, which negatively affected the
compressive strength of such materials. The obtained results indicate that the usage of
relatively high sintering temperatures is not always the necessary step for producing
geopolymer-based types of cement with prominent mechanical properties.
Ključne reči:
geopolymer-based cement materials / brushite / biscuit sintering / mechanical propertiesIzvor:
Science of Sintering, 2022, 54, 3, 287-294Izdavač:
- Belgrade : Association for ETRAN Society
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200017 (Univerzitet u Beogradu, Institut za nuklearne nauke Vinča, Beograd-Vinča) (RS-MESTD-inst-2020-200017)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200026 (Univerzitet u Beogradu, Institut za hemiju, tehnologiju i metalurgiju - IHTM) (RS-MESTD-inst-2020-200026)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200116 (Univerzitet u Beogradu, Poljoprivredni fakultet) (RS-MESTD-inst-2020-200116)
- European Institute of Innovation and Technology (EIT)
- EU Framework Programme for Research and Innovation (RIS-ALiCE, project no. 18258)
Kolekcije
Institucija/grupa
Hemijski fakultet / Faculty of ChemistryTY - JOUR AU - Đukić, Dunja AU - Šuljagić, Marija AU - Anđelković, Ljubica AU - Pavlović, Vera AU - Bučevac, Dušan AU - Vrbica, Boško AU - Mirković, Miljana PY - 2022 UR - http://cherry.chem.bg.ac.rs/handle/123456789/5620 AB - The effect of Ca2+ amount and sintering temperature on mechanical properties of geopolymer-brushite (GPB) binders was investigated. Brushite and raw abandoned kaolinite clay thermally transformed into metakaolin were used for GPB synthesis. The complete phase and structural analyses were performed by X-ray powder diffraction, and Fourier transforms infrared spectroscopy (FT-IR). The pore-filling effect as a consequence of Ca2+ ions incorporation into the hybrid geopolymer networks improved the compressive strength. On the other hand, the chosen biscuit sintering at 800 and 900o C caused the phase transformation of brushite into calcium pyrophosphate, which negatively affected the compressive strength of such materials. The obtained results indicate that the usage of relatively high sintering temperatures is not always the necessary step for producing geopolymer-based types of cement with prominent mechanical properties. PB - Belgrade : Association for ETRAN Society T2 - Science of Sintering T1 - Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials VL - 54 IS - 3 SP - 287 EP - 294 DO - 10.2298/SOS2203287D ER -
@article{ author = "Đukić, Dunja and Šuljagić, Marija and Anđelković, Ljubica and Pavlović, Vera and Bučevac, Dušan and Vrbica, Boško and Mirković, Miljana", year = "2022", abstract = "The effect of Ca2+ amount and sintering temperature on mechanical properties of geopolymer-brushite (GPB) binders was investigated. Brushite and raw abandoned kaolinite clay thermally transformed into metakaolin were used for GPB synthesis. The complete phase and structural analyses were performed by X-ray powder diffraction, and Fourier transforms infrared spectroscopy (FT-IR). The pore-filling effect as a consequence of Ca2+ ions incorporation into the hybrid geopolymer networks improved the compressive strength. On the other hand, the chosen biscuit sintering at 800 and 900o C caused the phase transformation of brushite into calcium pyrophosphate, which negatively affected the compressive strength of such materials. The obtained results indicate that the usage of relatively high sintering temperatures is not always the necessary step for producing geopolymer-based types of cement with prominent mechanical properties.", publisher = "Belgrade : Association for ETRAN Society", journal = "Science of Sintering", title = "Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials", volume = "54", number = "3", pages = "287-294", doi = "10.2298/SOS2203287D" }
Đukić, D., Šuljagić, M., Anđelković, L., Pavlović, V., Bučevac, D., Vrbica, B.,& Mirković, M.. (2022). Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials. in Science of Sintering Belgrade : Association for ETRAN Society., 54(3), 287-294. https://doi.org/10.2298/SOS2203287D
Đukić D, Šuljagić M, Anđelković L, Pavlović V, Bučevac D, Vrbica B, Mirković M. Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials. in Science of Sintering. 2022;54(3):287-294. doi:10.2298/SOS2203287D .
Đukić, Dunja, Šuljagić, Marija, Anđelković, Ljubica, Pavlović, Vera, Bučevac, Dušan, Vrbica, Boško, Mirković, Miljana, "Effect of Sintering Temperature and Calcium amount on Compressive Strength of Brushite-Metakaolin Polymer Materials" in Science of Sintering, 54, no. 3 (2022):287-294, https://doi.org/10.2298/SOS2203287D . .