TY  - JOUR
AU  - Ognjanović, Miloš
AU  - Jaćimović, Željko
AU  - Kosović-Perutović, Milica
AU  - Besu Žižak, Irina
AU  - Stanojković, Tatjana
AU  - Žižak, Željko
AU  - Dojčinović, Biljana P.
AU  - Stanković, Dalibor
AU  - Antić, Bratislav
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6184
AB  - Partial cation substitution can significantly change the physical properties of parent compounds. By controlling the chemical composition and knowing the mutual relationship between composition and physical properties, it is possible to tailor the properties of materials to those that are superior for desired technological application. Using the polyol synthesis procedure, a series of yttrium-substituted iron oxide nanoconstructs, γ-Fe2−xYxO3 (YIONs), was prepared. It was found that Y3+ could substitute Fe3+ in the crystal structures of maghemite (γ-Fe2O3) up to a limited concentration of ~1.5% (γ-Fe1.969Y0.031O3). Analysis of TEM micrographs showed that crystallites or particles were aggregated in flower-like structures with diameters from 53.7 ± 6.2 nm to 97.3 ± 37.0 nm, depending on yttrium concentration. To be investigated for potential applications as magnetic hyperthermia agents, YIONs were tested twice: their heating efficiency was tested and their toxicity was investigated. The Specific Absorption Rate (SAR) values were in the range of 32.6 W/g to 513 W/g and significantly decreased with increased yttrium concentration in the samples. Intrinsic loss power (ILP) for γ-Fe2O3 and γ-Fe1.995Y0.005O3 were ~8–9 nH·m2/Kg, which pointed to their excellent heating efficiency. IC50 values of investigated samples against cancer (HeLa) and normal (MRC-5) cells decreased with increased yttrium concentration and were higher than ~300 μg/mL. The samples of γ-Fe2−xYxO3 did not show a genotoxic effect. The results of toxicity studies show that YIONs are suitable for further in vitro/in vivo studies toward to their potential medical applications, while results of heat generation point to their potential use in magnetic hyperthermia cancer treatment or use as self-heating systems for other technological applications such as catalysis.
PB  - MDPI
T2  - Nanomaterials
T1  - Self-Heating Flower-like Nanoconstructs with Limited Incorporation of Yttrium in Maghemite: Effect of Chemical Composition on Heating Efficiency, Cytotoxicity and Genotoxicity
VL  - 13
IS  - 5
SP  - 870
DO  - 10.3390/nano13050870
ER  - 

@article{
author = "Ognjanović, Miloš and Jaćimović, Željko and Kosović-Perutović, Milica and Besu Žižak, Irina and Stanojković, Tatjana and Žižak, Željko and Dojčinović, Biljana P. and Stanković, Dalibor and Antić, Bratislav",
year = "2023",
abstract = "Partial cation substitution can significantly change the physical properties of parent compounds. By controlling the chemical composition and knowing the mutual relationship between composition and physical properties, it is possible to tailor the properties of materials to those that are superior for desired technological application. Using the polyol synthesis procedure, a series of yttrium-substituted iron oxide nanoconstructs, γ-Fe2−xYxO3 (YIONs), was prepared. It was found that Y3+ could substitute Fe3+ in the crystal structures of maghemite (γ-Fe2O3) up to a limited concentration of ~1.5% (γ-Fe1.969Y0.031O3). Analysis of TEM micrographs showed that crystallites or particles were aggregated in flower-like structures with diameters from 53.7 ± 6.2 nm to 97.3 ± 37.0 nm, depending on yttrium concentration. To be investigated for potential applications as magnetic hyperthermia agents, YIONs were tested twice: their heating efficiency was tested and their toxicity was investigated. The Specific Absorption Rate (SAR) values were in the range of 32.6 W/g to 513 W/g and significantly decreased with increased yttrium concentration in the samples. Intrinsic loss power (ILP) for γ-Fe2O3 and γ-Fe1.995Y0.005O3 were ~8–9 nH·m2/Kg, which pointed to their excellent heating efficiency. IC50 values of investigated samples against cancer (HeLa) and normal (MRC-5) cells decreased with increased yttrium concentration and were higher than ~300 μg/mL. The samples of γ-Fe2−xYxO3 did not show a genotoxic effect. The results of toxicity studies show that YIONs are suitable for further in vitro/in vivo studies toward to their potential medical applications, while results of heat generation point to their potential use in magnetic hyperthermia cancer treatment or use as self-heating systems for other technological applications such as catalysis.",
publisher = "MDPI",
journal = "Nanomaterials",
title = "Self-Heating Flower-like Nanoconstructs with Limited Incorporation of Yttrium in Maghemite: Effect of Chemical Composition on Heating Efficiency, Cytotoxicity and Genotoxicity",
volume = "13",
number = "5",
pages = "870",
doi = "10.3390/nano13050870"
}

Ognjanović, M., Jaćimović, Ž., Kosović-Perutović, M., Besu Žižak, I., Stanojković, T., Žižak, Ž., Dojčinović, B. P., Stanković, D.,& Antić, B.. (2023). Self-Heating Flower-like Nanoconstructs with Limited Incorporation of Yttrium in Maghemite: Effect of Chemical Composition on Heating Efficiency, Cytotoxicity and Genotoxicity. in Nanomaterials
MDPI., 13(5), 870.
https://doi.org/10.3390/nano13050870

Ognjanović M, Jaćimović Ž, Kosović-Perutović M, Besu Žižak I, Stanojković T, Žižak Ž, Dojčinović BP, Stanković D, Antić B. Self-Heating Flower-like Nanoconstructs with Limited Incorporation of Yttrium in Maghemite: Effect of Chemical Composition on Heating Efficiency, Cytotoxicity and Genotoxicity. in Nanomaterials. 2023;13(5):870.
doi:10.3390/nano13050870 .

Ognjanović, Miloš, Jaćimović, Željko, Kosović-Perutović, Milica, Besu Žižak, Irina, Stanojković, Tatjana, Žižak, Željko, Dojčinović, Biljana P., Stanković, Dalibor, Antić, Bratislav, "Self-Heating Flower-like Nanoconstructs with Limited Incorporation of Yttrium in Maghemite: Effect of Chemical Composition on Heating Efficiency, Cytotoxicity and Genotoxicity" in Nanomaterials, 13, no. 5 (2023):870,
https://doi.org/10.3390/nano13050870 . .

TY  - JOUR
AU  - Vlahović, Filip
AU  - Ognjanović, Miloš
AU  - Đurđić, Slađana Z.
AU  - Kukuruzar, Andrej
AU  - Antić, Bratislav
AU  - Dojčinović, Biljana P.
AU  - Stanković, Dalibor
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6253
AB  - We have set-up an electrochemical advanced oxidation process for ethidium bromide (1), based on the Eu-doped MnWO4 (Eu:MnWO4), obtained through a template-driven synthesis, along with developing a suitable monitoring method. Under galvanostatic conditions, Eu:MnWO4-coated graphite electrode serves as anode, applicable for removal of 1. To go further and augment the catalytic method, we have applied a modified carbon paste electrode for the monitoring of 1 with the limit of detection (LOD) of 54 nM. Enhancement of the hydrogen evolution reaction is an indication of electrocatalytic properties of the material, whereby developed method emerges as a candidate for straightforward application in electrochemical advanced oxidation processes (EAOPs). We have enriched experimental data with theoretical insights, provided by Density Functional Theory (DFT), and proposed oxidation mechanism of 1. Based on obtained results, we propose the new nanomaterial as a potent electrochemical modifier, suitable for catalytic treatment and process monitoring of the 1-polluted waters.
PB  - Elsevier
T2  - Applied Catalysis B: Environmental
T1  - Design of an ethidium bromide control circuit supported by deep theoretical insight
VL  - 334
SP  - 122819
DO  - 10.1016/j.apcatb.2023.122819
ER  - 

@article{
author = "Vlahović, Filip and Ognjanović, Miloš and Đurđić, Slađana Z. and Kukuruzar, Andrej and Antić, Bratislav and Dojčinović, Biljana P. and Stanković, Dalibor",
year = "2023",
abstract = "We have set-up an electrochemical advanced oxidation process for ethidium bromide (1), based on the Eu-doped MnWO4 (Eu:MnWO4), obtained through a template-driven synthesis, along with developing a suitable monitoring method. Under galvanostatic conditions, Eu:MnWO4-coated graphite electrode serves as anode, applicable for removal of 1. To go further and augment the catalytic method, we have applied a modified carbon paste electrode for the monitoring of 1 with the limit of detection (LOD) of 54 nM. Enhancement of the hydrogen evolution reaction is an indication of electrocatalytic properties of the material, whereby developed method emerges as a candidate for straightforward application in electrochemical advanced oxidation processes (EAOPs). We have enriched experimental data with theoretical insights, provided by Density Functional Theory (DFT), and proposed oxidation mechanism of 1. Based on obtained results, we propose the new nanomaterial as a potent electrochemical modifier, suitable for catalytic treatment and process monitoring of the 1-polluted waters.",
publisher = "Elsevier",
journal = "Applied Catalysis B: Environmental",
title = "Design of an ethidium bromide control circuit supported by deep theoretical insight",
volume = "334",
pages = "122819",
doi = "10.1016/j.apcatb.2023.122819"
}

Vlahović, F., Ognjanović, M., Đurđić, S. Z., Kukuruzar, A., Antić, B., Dojčinović, B. P.,& Stanković, D.. (2023). Design of an ethidium bromide control circuit supported by deep theoretical insight. in Applied Catalysis B: Environmental
Elsevier., 334, 122819.
https://doi.org/10.1016/j.apcatb.2023.122819

Vlahović F, Ognjanović M, Đurđić SZ, Kukuruzar A, Antić B, Dojčinović BP, Stanković D. Design of an ethidium bromide control circuit supported by deep theoretical insight. in Applied Catalysis B: Environmental. 2023;334:122819.
doi:10.1016/j.apcatb.2023.122819 .

Vlahović, Filip, Ognjanović, Miloš, Đurđić, Slađana Z., Kukuruzar, Andrej, Antić, Bratislav, Dojčinović, Biljana P., Stanković, Dalibor, "Design of an ethidium bromide control circuit supported by deep theoretical insight" in Applied Catalysis B: Environmental, 334 (2023):122819,
https://doi.org/10.1016/j.apcatb.2023.122819 . .

TY  - DATA
AU  - Ognjanović, Miloš
AU  - Krstić-Ristivojević, Maja
AU  - Antić, Bratislav
AU  - Ćirković-Veličković, Tanja
AU  - Mutić, Jelena
AU  - Kónya, Zoltán
AU  - Stanković, Dalibor
PY  - 2022
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5672
AB  - An electrochemical approach is presented based on multiwall carbon nanotubes (MWCNTs) and neodymium(III) hydroxide (Nd(OH)3) nanoflakes for detection of bovine serum albumin (BSA). The materials were characterized morphologically (XRPD, SEM, and HR-TEM) and electrochemically (DPV, EIS). The MWCNTs@Nd(OH)3 composite was used as support for bovine serum albumin polyclonal antibody (anti-BSA). After the antibody immobilization on the electrochemical platform and antigen/antibody binding time (optimum 60 min), the proposed approach shows a linear voltammetric response toward BSA concentration in the range 0.066 to 6.010 ng mL−1 at maximum peak potential of 0.13 V (vs. Ag/AgCl). Limit of detection (LOD) and limit of quantification (LOQ) were 18 pg mL−1 and 61 pg mL−1, respectively. The precision of the method calculated as relative standard deviation (RSD) of five independent measurements was better 3%. The selectivity of the optimized method regarding structurally similar proteins (human serum albumin and human hemoglobin), ions (Na+, K+, Ca2+, and NO2−), or compounds (glucose, ascorbic acid, dopamine, uric acid, paracetamol, and glycine) was found to be satisfactory, with the current changes of less than 5% in the presence of up to 1 × 105 times higher concentrations (depending on the compound) of the listed potential interfering compounds. Practical applicability of immunosensor for BSA determination in cow whey sample, with recovery values in the range 97 to 103%, shows that the developed method has high potential for precise and accurate detection of BSA, as well as exceptional miniaturization possibilities for on-site and equipment-free sensing.
PB  - Springer
T2  - Microchimica Acta
T1  - Supplementary material for: Đurđić, S., Ognjanović, M., Krstić Ristivojević, M., Antić, B., Ćirković Veličković, T., Mutić, J., Kónya, Z.,& Stanković, D.. (2022). Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection. in Microchimica Acta Springer., 189(11), 422. https://doi.org/10.1007/s00604-022-05514-z
VL  - 189
IS  - 11
SP  - 422
UR  - https://hdl.handle.net/21.15107/rcub_cherry_5672
ER  - 

@misc{
author = "Ognjanović, Miloš and Krstić-Ristivojević, Maja and Antić, Bratislav and Ćirković-Veličković, Tanja and Mutić, Jelena and Kónya, Zoltán and Stanković, Dalibor",
year = "2022",
abstract = "An electrochemical approach is presented based on multiwall carbon nanotubes (MWCNTs) and neodymium(III) hydroxide (Nd(OH)3) nanoflakes for detection of bovine serum albumin (BSA). The materials were characterized morphologically (XRPD, SEM, and HR-TEM) and electrochemically (DPV, EIS). The MWCNTs@Nd(OH)3 composite was used as support for bovine serum albumin polyclonal antibody (anti-BSA). After the antibody immobilization on the electrochemical platform and antigen/antibody binding time (optimum 60 min), the proposed approach shows a linear voltammetric response toward BSA concentration in the range 0.066 to 6.010 ng mL−1 at maximum peak potential of 0.13 V (vs. Ag/AgCl). Limit of detection (LOD) and limit of quantification (LOQ) were 18 pg mL−1 and 61 pg mL−1, respectively. The precision of the method calculated as relative standard deviation (RSD) of five independent measurements was better 3%. The selectivity of the optimized method regarding structurally similar proteins (human serum albumin and human hemoglobin), ions (Na+, K+, Ca2+, and NO2−), or compounds (glucose, ascorbic acid, dopamine, uric acid, paracetamol, and glycine) was found to be satisfactory, with the current changes of less than 5% in the presence of up to 1 × 105 times higher concentrations (depending on the compound) of the listed potential interfering compounds. Practical applicability of immunosensor for BSA determination in cow whey sample, with recovery values in the range 97 to 103%, shows that the developed method has high potential for precise and accurate detection of BSA, as well as exceptional miniaturization possibilities for on-site and equipment-free sensing.",
publisher = "Springer",
journal = "Microchimica Acta",
title = "Supplementary material for: Đurđić, S., Ognjanović, M., Krstić Ristivojević, M., Antić, B., Ćirković Veličković, T., Mutić, J., Kónya, Z.,& Stanković, D.. (2022). Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection. in Microchimica Acta Springer., 189(11), 422. https://doi.org/10.1007/s00604-022-05514-z",
volume = "189",
number = "11",
pages = "422",
url = "https://hdl.handle.net/21.15107/rcub_cherry_5672"
}

Ognjanović, M., Krstić-Ristivojević, M., Antić, B., Ćirković-Veličković, T., Mutić, J., Kónya, Z.,& Stanković, D.. (2022). Supplementary material for: Đurđić, S., Ognjanović, M., Krstić Ristivojević, M., Antić, B., Ćirković Veličković, T., Mutić, J., Kónya, Z.,& Stanković, D.. (2022). Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection. in Microchimica Acta Springer., 189(11), 422. https://doi.org/10.1007/s00604-022-05514-z. in Microchimica Acta
Springer., 189(11), 422.
https://hdl.handle.net/21.15107/rcub_cherry_5672

Ognjanović M, Krstić-Ristivojević M, Antić B, Ćirković-Veličković T, Mutić J, Kónya Z, Stanković D. Supplementary material for: Đurđić, S., Ognjanović, M., Krstić Ristivojević, M., Antić, B., Ćirković Veličković, T., Mutić, J., Kónya, Z.,& Stanković, D.. (2022). Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection. in Microchimica Acta Springer., 189(11), 422. https://doi.org/10.1007/s00604-022-05514-z. in Microchimica Acta. 2022;189(11):422.
https://hdl.handle.net/21.15107/rcub_cherry_5672 .

Ognjanović, Miloš, Krstić-Ristivojević, Maja, Antić, Bratislav, Ćirković-Veličković, Tanja, Mutić, Jelena, Kónya, Zoltán, Stanković, Dalibor, "Supplementary material for: Đurđić, S., Ognjanović, M., Krstić Ristivojević, M., Antić, B., Ćirković Veličković, T., Mutić, J., Kónya, Z.,& Stanković, D.. (2022). Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection. in Microchimica Acta Springer., 189(11), 422. https://doi.org/10.1007/s00604-022-05514-z" in Microchimica Acta, 189, no. 11 (2022):422,
https://hdl.handle.net/21.15107/rcub_cherry_5672 .

TY  - JOUR
AU  - Knežević, Sara
AU  - Ognjanović, Miloš
AU  - Dojčinović, Biljana P.
AU  - Antić, Bratislav
AU  - Vraneš-Đurić, Sanja
AU  - Manojlović, Dragan D.
AU  - Stanković, Dalibor
PY  - 2022
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/10055
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/4834
AB  - Honokiol is neolignan present in the magnolia bark. It displays versatile pharmacological properties—neuroprotective and anxiolytic effect, anti-cancer activity and antimicrobial effect being the most important. This paper aims to develop a voltammetric non-enzymatic biosensor for honokiol detection, quantification and monitoring in drugs and cosmetic products. The materials used in this study were synthesized and characterized by HR-XRPD, SEM, ATR-FTIR and electrochemical methods. Bi2O3, being a p-type semiconductor, was used as an electrode material. Both its semiconductivity and electrocatalytic properties result from lattice structure defects, which differ on the surface and in the bulk of the bismuth oxide crystal, and therefore are crystal size dependent. The influence of the particle size of Bi2O3 on its electrocatalytic properties was studied, and it was confirmed that Bi2O3 nanoparticles have better overall conductive/resistive and catalytic characteristics than microribbons and that the optimal electrode modification for sensing application was obtained by Bi2O3@SWCNT composite material preparation. Here, we established a sensitive electrochemical sensing platform for honokiol detection based on CP electrode modified with bismuth oxide nanoparticles and SWCNT with the 0.17 μM limit of detection, and linear operating range from 0.1 to 50 μM. The effect of potential interferents on honokiol detection was explored. Obtained results in the interference tests and the real sample analysis suggest that the developed approach is selective, accurate and reproducible. Due to the low detection limit and a wide working range, the proposed sensing platform opens great opportunities for further construction of sensors for honokiol detection and monitoring in the pharmaceutical industry and medicinal chemistry.
T2  - Food Analytical Methods
T1  - Sensing Platform Based on Carbon Paste Electrode Modified with Bismuth Oxide Nanoparticles and SWCNT for Submicromolar Quantification of Honokiol
VL  - 15
IS  - 4
SP  - 856
EP  - 867
DO  - 10.1007/s12161-021-02174-2
ER  - 

@article{
author = "Knežević, Sara and Ognjanović, Miloš and Dojčinović, Biljana P. and Antić, Bratislav and Vraneš-Đurić, Sanja and Manojlović, Dragan D. and Stanković, Dalibor",
year = "2022",
abstract = "Honokiol is neolignan present in the magnolia bark. It displays versatile pharmacological properties—neuroprotective and anxiolytic effect, anti-cancer activity and antimicrobial effect being the most important. This paper aims to develop a voltammetric non-enzymatic biosensor for honokiol detection, quantification and monitoring in drugs and cosmetic products. The materials used in this study were synthesized and characterized by HR-XRPD, SEM, ATR-FTIR and electrochemical methods. Bi2O3, being a p-type semiconductor, was used as an electrode material. Both its semiconductivity and electrocatalytic properties result from lattice structure defects, which differ on the surface and in the bulk of the bismuth oxide crystal, and therefore are crystal size dependent. The influence of the particle size of Bi2O3 on its electrocatalytic properties was studied, and it was confirmed that Bi2O3 nanoparticles have better overall conductive/resistive and catalytic characteristics than microribbons and that the optimal electrode modification for sensing application was obtained by Bi2O3@SWCNT composite material preparation. Here, we established a sensitive electrochemical sensing platform for honokiol detection based on CP electrode modified with bismuth oxide nanoparticles and SWCNT with the 0.17 μM limit of detection, and linear operating range from 0.1 to 50 μM. The effect of potential interferents on honokiol detection was explored. Obtained results in the interference tests and the real sample analysis suggest that the developed approach is selective, accurate and reproducible. Due to the low detection limit and a wide working range, the proposed sensing platform opens great opportunities for further construction of sensors for honokiol detection and monitoring in the pharmaceutical industry and medicinal chemistry.",
journal = "Food Analytical Methods",
title = "Sensing Platform Based on Carbon Paste Electrode Modified with Bismuth Oxide Nanoparticles and SWCNT for Submicromolar Quantification of Honokiol",
volume = "15",
number = "4",
pages = "856-867",
doi = "10.1007/s12161-021-02174-2"
}

Knežević, S., Ognjanović, M., Dojčinović, B. P., Antić, B., Vraneš-Đurić, S., Manojlović, D. D.,& Stanković, D.. (2022). Sensing Platform Based on Carbon Paste Electrode Modified with Bismuth Oxide Nanoparticles and SWCNT for Submicromolar Quantification of Honokiol. in Food Analytical Methods, 15(4), 856-867.
https://doi.org/10.1007/s12161-021-02174-2

Knežević S, Ognjanović M, Dojčinović BP, Antić B, Vraneš-Đurić S, Manojlović DD, Stanković D. Sensing Platform Based on Carbon Paste Electrode Modified with Bismuth Oxide Nanoparticles and SWCNT for Submicromolar Quantification of Honokiol. in Food Analytical Methods. 2022;15(4):856-867.
doi:10.1007/s12161-021-02174-2 .

Knežević, Sara, Ognjanović, Miloš, Dojčinović, Biljana P., Antić, Bratislav, Vraneš-Đurić, Sanja, Manojlović, Dragan D., Stanković, Dalibor, "Sensing Platform Based on Carbon Paste Electrode Modified with Bismuth Oxide Nanoparticles and SWCNT for Submicromolar Quantification of Honokiol" in Food Analytical Methods, 15, no. 4 (2022):856-867,
https://doi.org/10.1007/s12161-021-02174-2 . .

TY  - JOUR
AU  - Đurđić, Slađana Z.
AU  - Ognjanović, Miloš
AU  - Krstić-Ristivojević, Maja
AU  - Antić, Bratislav
AU  - Ćirković-Veličković, Tanja
AU  - Mutić, Jelena
AU  - Kónya, Zoltán
AU  - Stanković, Dalibor
PY  - 2022
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5670
AB  - An electrochemical approach is presented based on multiwall carbon nanotubes (MWCNTs) and neodymium(III) hydroxide (Nd(OH)3) nanoflakes for detection of bovine serum albumin (BSA). The materials were characterized morphologically (XRPD, SEM, and HR-TEM) and electrochemically (DPV, EIS). The MWCNTs@Nd(OH)3 composite was used as support for bovine serum albumin polyclonal antibody (anti-BSA). After the antibody immobilization on the electrochemical platform and antigen/antibody binding time (optimum 60 min), the proposed approach shows a linear voltammetric response toward BSA concentration in the range 0.066 to 6.010 ng mL−1 at maximum peak potential of 0.13 V (vs. Ag/AgCl). Limit of detection (LOD) and limit of quantification (LOQ) were 18 pg mL−1 and 61 pg mL−1, respectively. The precision of the method calculated as relative standard deviation (RSD) of five independent measurements was better 3%. The selectivity of the optimized method regarding structurally similar proteins (human serum albumin and human hemoglobin), ions (Na+, K+, Ca2+, and NO2−), or compounds (glucose, ascorbic acid, dopamine, uric acid, paracetamol, and glycine) was found to be satisfactory, with the current changes of less than 5% in the presence of up to 1 × 105 times higher concentrations (depending on the compound) of the listed potential interfering compounds. Practical applicability of immunosensor for BSA determination in cow whey sample, with recovery values in the range 97 to 103%, shows that the developed method has high potential for precise and accurate detection of BSA, as well as exceptional miniaturization possibilities for on-site and equipment-free sensing.
PB  - Springer
T2  - Microchimica Acta
T1  - Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection
VL  - 189
IS  - 11
SP  - 422
DO  - 10.1007/s00604-022-05514-z
ER  - 

@article{
author = "Đurđić, Slađana Z. and Ognjanović, Miloš and Krstić-Ristivojević, Maja and Antić, Bratislav and Ćirković-Veličković, Tanja and Mutić, Jelena and Kónya, Zoltán and Stanković, Dalibor",
year = "2022",
abstract = "An electrochemical approach is presented based on multiwall carbon nanotubes (MWCNTs) and neodymium(III) hydroxide (Nd(OH)3) nanoflakes for detection of bovine serum albumin (BSA). The materials were characterized morphologically (XRPD, SEM, and HR-TEM) and electrochemically (DPV, EIS). The MWCNTs@Nd(OH)3 composite was used as support for bovine serum albumin polyclonal antibody (anti-BSA). After the antibody immobilization on the electrochemical platform and antigen/antibody binding time (optimum 60 min), the proposed approach shows a linear voltammetric response toward BSA concentration in the range 0.066 to 6.010 ng mL−1 at maximum peak potential of 0.13 V (vs. Ag/AgCl). Limit of detection (LOD) and limit of quantification (LOQ) were 18 pg mL−1 and 61 pg mL−1, respectively. The precision of the method calculated as relative standard deviation (RSD) of five independent measurements was better 3%. The selectivity of the optimized method regarding structurally similar proteins (human serum albumin and human hemoglobin), ions (Na+, K+, Ca2+, and NO2−), or compounds (glucose, ascorbic acid, dopamine, uric acid, paracetamol, and glycine) was found to be satisfactory, with the current changes of less than 5% in the presence of up to 1 × 105 times higher concentrations (depending on the compound) of the listed potential interfering compounds. Practical applicability of immunosensor for BSA determination in cow whey sample, with recovery values in the range 97 to 103%, shows that the developed method has high potential for precise and accurate detection of BSA, as well as exceptional miniaturization possibilities for on-site and equipment-free sensing.",
publisher = "Springer",
journal = "Microchimica Acta",
title = "Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection",
volume = "189",
number = "11",
pages = "422",
doi = "10.1007/s00604-022-05514-z"
}

Đurđić, S. Z., Ognjanović, M., Krstić-Ristivojević, M., Antić, B., Ćirković-Veličković, T., Mutić, J., Kónya, Z.,& Stanković, D.. (2022). Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection. in Microchimica Acta
Springer., 189(11), 422.
https://doi.org/10.1007/s00604-022-05514-z

Đurđić SZ, Ognjanović M, Krstić-Ristivojević M, Antić B, Ćirković-Veličković T, Mutić J, Kónya Z, Stanković D. Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection. in Microchimica Acta. 2022;189(11):422.
doi:10.1007/s00604-022-05514-z .

Đurđić, Slađana Z., Ognjanović, Miloš, Krstić-Ristivojević, Maja, Antić, Bratislav, Ćirković-Veličković, Tanja, Mutić, Jelena, Kónya, Zoltán, Stanković, Dalibor, "Voltammetric immunoassay based on MWCNTs@Nd(OH)3-BSA-antibody platform for sensitive BSA detection" in Microchimica Acta, 189, no. 11 (2022):422,
https://doi.org/10.1007/s00604-022-05514-z . .

TY  - JOUR
AU  - Ognjanović, Miloš
AU  - Nikolić, Katarina
AU  - Bošković, Marko
AU  - Pastor, Ferenc
AU  - Popov, Nina
AU  - Marciuš, Marijan
AU  - Krehula, Stjepko
AU  - Antić, Bratislav
AU  - Stanković, Dalibor
PY  - 2022
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5682
AB  - Morphine (MORPH) is natural alkaloid and mainly used as a pain reliever. Its monitoring in human body fluids is crucial for modern medicine. In this paper, we have developed an electrochemical sensor for submicromolar detection of MORPH. The sensor is based on modified carbon paste electrode (CPE) by investigating the FexW1-xO4 ratio in iron tungstate (FeWO4), as well as the ratio of this material in CPE. For the first time, the effect of the iron–tungsten ratio in terms of achieving the best possible electrochemical characteristics for the detection of an important molecule for humans was examined. Morphological and electrochemical characteristics of materials were studied. The best results were obtained using Fe1W3 and 7.5% of modifier in CPE. For MORPH detection, square wave voltammetry (SWV) was optimized. Under the optimized conditions, Fe1W3@CPE resulted in limit of detection (LOD) of the method of 0.58 µM and limit of quantification (LOQ) of 1.94 µM. The linear operating range between 5 and 85 µM of MORPH in the Britton–Robinson buffer solution (BRBS) at pH 8 as supporting electrolyte was obtained. The Fe1W3@CPE sensor resulted in good selectivity and excellent repeatability with relative standard deviation (RSD) and was applied in real-world samples of human urine. Application for direct MORPH detection, without tedious sample pretreatment procedures, suggests that developed electrochemical sensor has appeared to be a suitable competitor for efficient, precise, and accurate monitoring of the MORPH in biological fluids.
PB  - MDPI
T2  - Biosensors
T1  - Electrochemical Determination of Morphine in Urine Samples by Tailoring FeWO4/CPE Sensor
VL  - 12
IS  - 11
SP  - 932
DO  - 10.3390/bios12110932
ER  - 

@article{
author = "Ognjanović, Miloš and Nikolić, Katarina and Bošković, Marko and Pastor, Ferenc and Popov, Nina and Marciuš, Marijan and Krehula, Stjepko and Antić, Bratislav and Stanković, Dalibor",
year = "2022",
abstract = "Morphine (MORPH) is natural alkaloid and mainly used as a pain reliever. Its monitoring in human body fluids is crucial for modern medicine. In this paper, we have developed an electrochemical sensor for submicromolar detection of MORPH. The sensor is based on modified carbon paste electrode (CPE) by investigating the FexW1-xO4 ratio in iron tungstate (FeWO4), as well as the ratio of this material in CPE. For the first time, the effect of the iron–tungsten ratio in terms of achieving the best possible electrochemical characteristics for the detection of an important molecule for humans was examined. Morphological and electrochemical characteristics of materials were studied. The best results were obtained using Fe1W3 and 7.5% of modifier in CPE. For MORPH detection, square wave voltammetry (SWV) was optimized. Under the optimized conditions, Fe1W3@CPE resulted in limit of detection (LOD) of the method of 0.58 µM and limit of quantification (LOQ) of 1.94 µM. The linear operating range between 5 and 85 µM of MORPH in the Britton–Robinson buffer solution (BRBS) at pH 8 as supporting electrolyte was obtained. The Fe1W3@CPE sensor resulted in good selectivity and excellent repeatability with relative standard deviation (RSD) and was applied in real-world samples of human urine. Application for direct MORPH detection, without tedious sample pretreatment procedures, suggests that developed electrochemical sensor has appeared to be a suitable competitor for efficient, precise, and accurate monitoring of the MORPH in biological fluids.",
publisher = "MDPI",
journal = "Biosensors",
title = "Electrochemical Determination of Morphine in Urine Samples by Tailoring FeWO4/CPE Sensor",
volume = "12",
number = "11",
pages = "932",
doi = "10.3390/bios12110932"
}

Ognjanović, M., Nikolić, K., Bošković, M., Pastor, F., Popov, N., Marciuš, M., Krehula, S., Antić, B.,& Stanković, D.. (2022). Electrochemical Determination of Morphine in Urine Samples by Tailoring FeWO4/CPE Sensor. in Biosensors
MDPI., 12(11), 932.
https://doi.org/10.3390/bios12110932

Ognjanović M, Nikolić K, Bošković M, Pastor F, Popov N, Marciuš M, Krehula S, Antić B, Stanković D. Electrochemical Determination of Morphine in Urine Samples by Tailoring FeWO4/CPE Sensor. in Biosensors. 2022;12(11):932.
doi:10.3390/bios12110932 .

Ognjanović, Miloš, Nikolić, Katarina, Bošković, Marko, Pastor, Ferenc, Popov, Nina, Marciuš, Marijan, Krehula, Stjepko, Antić, Bratislav, Stanković, Dalibor, "Electrochemical Determination of Morphine in Urine Samples by Tailoring FeWO4/CPE Sensor" in Biosensors, 12, no. 11 (2022):932,
https://doi.org/10.3390/bios12110932 . .

TY  - JOUR
AU  - Knežević, Sara
AU  - Ognjanović, Miloš
AU  - Gavrović-Jankulović, Marija
AU  - Đurašinović, Tatjana
AU  - Antić, Bratislav
AU  - Vranješ-Đurić, Sanja
AU  - Stanković, Dalibor
PY  - 2022
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/4720
AB  - S-Adenosyl-L-Homocysteine (AdoHcy) is a crucial pathological factor in homocysteine-associated disorders. We developed an impedimetric approach for single drop S-Adenosyl-L-Homocysteine detection, based on S-Adenosyl-L-Homocysteine hydrolase (SAH), produced in the prokaryotic expression system (E. coli) by recombinant DNA technology, immobilized on citrate acid-coated gallium oxyhydroxide dispersed over single-walled carbon nanotubes (CA/GaO(OH)@SWCNT). The proposed biosensor offers detection of AdoHcy, with a limit of detection (LOD) of 0.17 μM. with operating linear range from 1 to 44 μM. The remarkable stability of gallium oxyhydroxide crystal was further improved by citric acid coating and its optical, electrical and physical anisotropy was skipped using SWCNTs.
PB  - Wiley
T2  - Electroanalysis
T1  - S-Adenosyl-L-Homocysteine Hydrolase Immobilized on Citric Acid-capped Gallium Oxyhydroxide on SWCNTs Modified Electrode for AdoHcy Impedimetric Sensing
VL  - 34
IS  - 1
SP  - 15
EP  - 24
DO  - 10.1002/elan.202100362
ER  - 

@article{
author = "Knežević, Sara and Ognjanović, Miloš and Gavrović-Jankulović, Marija and Đurašinović, Tatjana and Antić, Bratislav and Vranješ-Đurić, Sanja and Stanković, Dalibor",
year = "2022",
abstract = "S-Adenosyl-L-Homocysteine (AdoHcy) is a crucial pathological factor in homocysteine-associated disorders. We developed an impedimetric approach for single drop S-Adenosyl-L-Homocysteine detection, based on S-Adenosyl-L-Homocysteine hydrolase (SAH), produced in the prokaryotic expression system (E. coli) by recombinant DNA technology, immobilized on citrate acid-coated gallium oxyhydroxide dispersed over single-walled carbon nanotubes (CA/GaO(OH)@SWCNT). The proposed biosensor offers detection of AdoHcy, with a limit of detection (LOD) of 0.17 μM. with operating linear range from 1 to 44 μM. The remarkable stability of gallium oxyhydroxide crystal was further improved by citric acid coating and its optical, electrical and physical anisotropy was skipped using SWCNTs.",
publisher = "Wiley",
journal = "Electroanalysis",
title = "S-Adenosyl-L-Homocysteine Hydrolase Immobilized on Citric Acid-capped Gallium Oxyhydroxide on SWCNTs Modified Electrode for AdoHcy Impedimetric Sensing",
volume = "34",
number = "1",
pages = "15-24",
doi = "10.1002/elan.202100362"
}

Knežević, S., Ognjanović, M., Gavrović-Jankulović, M., Đurašinović, T., Antić, B., Vranješ-Đurić, S.,& Stanković, D.. (2022). S-Adenosyl-L-Homocysteine Hydrolase Immobilized on Citric Acid-capped Gallium Oxyhydroxide on SWCNTs Modified Electrode for AdoHcy Impedimetric Sensing. in Electroanalysis
Wiley., 34(1), 15-24.
https://doi.org/10.1002/elan.202100362

Knežević S, Ognjanović M, Gavrović-Jankulović M, Đurašinović T, Antić B, Vranješ-Đurić S, Stanković D. S-Adenosyl-L-Homocysteine Hydrolase Immobilized on Citric Acid-capped Gallium Oxyhydroxide on SWCNTs Modified Electrode for AdoHcy Impedimetric Sensing. in Electroanalysis. 2022;34(1):15-24.
doi:10.1002/elan.202100362 .

Knežević, Sara, Ognjanović, Miloš, Gavrović-Jankulović, Marija, Đurašinović, Tatjana, Antić, Bratislav, Vranješ-Đurić, Sanja, Stanković, Dalibor, "S-Adenosyl-L-Homocysteine Hydrolase Immobilized on Citric Acid-capped Gallium Oxyhydroxide on SWCNTs Modified Electrode for AdoHcy Impedimetric Sensing" in Electroanalysis, 34, no. 1 (2022):15-24,
https://doi.org/10.1002/elan.202100362 . .

TY  - JOUR
AU  - Ognjanović, Miloš
AU  - Stanković, Dalibor
AU  - Jaćimović, Željko K.
AU  - Kosović-Perutović, Milica
AU  - Mariano, José F.M.L.
AU  - Krehula, Sjepko
AU  - Musić, Svetozar
AU  - Antić, Bratislav
PY  - 2022
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5151
AB  - Nickel acetate tetrahydrate (NAT) sample series were used to modify screen-printed carbon electrodes (SPCE). The samples were hybrid Ni/NiO nanocomposites, where the NiO phase increased with an applied treatment temperature. Results of electrochemical measurements pointed that the Ni/NiO550/SPCE-modified electrode had the best analytical performance toward the detection of riboflavin (RF). The Ni/NiO550/SPCE-based sensor showed linear response with RF in the concentration range of 0.5–75 μM and 0.15 μM LOD in BRBS. Sensor offered fast response time, good repeatability, and selectivity with an RSD of 1.4 %. Our results show that the Ni:NiO nanocomposite ratio strongly influenced the electroanalytical performance of SPCE.
PB  - Wiley
T2  - Electroanalysis
T1  - Construction of Sensor for Submicromolar Detection of Riboflavin by Surface Modification of SPCE with Thermal Degradation Products of Nickel Acetate Tetrahydrate
VL  - 34
IS  - 9
SP  - 1431
EP  - 1440
DO  - 10.1002/elan.202100602
ER  - 

@article{
author = "Ognjanović, Miloš and Stanković, Dalibor and Jaćimović, Željko K. and Kosović-Perutović, Milica and Mariano, José F.M.L. and Krehula, Sjepko and Musić, Svetozar and Antić, Bratislav",
year = "2022",
abstract = "Nickel acetate tetrahydrate (NAT) sample series were used to modify screen-printed carbon electrodes (SPCE). The samples were hybrid Ni/NiO nanocomposites, where the NiO phase increased with an applied treatment temperature. Results of electrochemical measurements pointed that the Ni/NiO550/SPCE-modified electrode had the best analytical performance toward the detection of riboflavin (RF). The Ni/NiO550/SPCE-based sensor showed linear response with RF in the concentration range of 0.5–75 μM and 0.15 μM LOD in BRBS. Sensor offered fast response time, good repeatability, and selectivity with an RSD of 1.4 %. Our results show that the Ni:NiO nanocomposite ratio strongly influenced the electroanalytical performance of SPCE.",
publisher = "Wiley",
journal = "Electroanalysis",
title = "Construction of Sensor for Submicromolar Detection of Riboflavin by Surface Modification of SPCE with Thermal Degradation Products of Nickel Acetate Tetrahydrate",
volume = "34",
number = "9",
pages = "1431-1440",
doi = "10.1002/elan.202100602"
}

Ognjanović, M., Stanković, D., Jaćimović, Ž. K., Kosović-Perutović, M., Mariano, J. F.M.L., Krehula, S., Musić, S.,& Antić, B.. (2022). Construction of Sensor for Submicromolar Detection of Riboflavin by Surface Modification of SPCE with Thermal Degradation Products of Nickel Acetate Tetrahydrate. in Electroanalysis
Wiley., 34(9), 1431-1440.
https://doi.org/10.1002/elan.202100602

Ognjanović M, Stanković D, Jaćimović ŽK, Kosović-Perutović M, Mariano JF, Krehula S, Musić S, Antić B. Construction of Sensor for Submicromolar Detection of Riboflavin by Surface Modification of SPCE with Thermal Degradation Products of Nickel Acetate Tetrahydrate. in Electroanalysis. 2022;34(9):1431-1440.
doi:10.1002/elan.202100602 .

Ognjanović, Miloš, Stanković, Dalibor, Jaćimović, Željko K., Kosović-Perutović, Milica, Mariano, José F.M.L., Krehula, Sjepko, Musić, Svetozar, Antić, Bratislav, "Construction of Sensor for Submicromolar Detection of Riboflavin by Surface Modification of SPCE with Thermal Degradation Products of Nickel Acetate Tetrahydrate" in Electroanalysis, 34, no. 9 (2022):1431-1440,
https://doi.org/10.1002/elan.202100602 . .

TY  - JOUR
AU  - Ognjanović, Miloš
AU  - Stanković, Dalibor
AU  - Jaćimović, Željko K.
AU  - Kosović-Perutović, Milica
AU  - Dojčinović, Biljana P.
AU  - Antić, Bratislav
PY  - 2021
UR  - https://www.sciencedirect.com/science/article/pii/S0925838821024841
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/4578
AB  - The citric acid (CA), dextran (DEX) and (3-aminopropyl)triethoxysilane (APTES) are frequently used ligands for surface modification of magnetite nanoparticles to improve their colloidal stability and biocompatibility for use in biomedicine. Here we report the synthesis, surface modification of magnetite (Fe3O4) nanoparticles and analysis of the influence of coating materials on heating efficiency in magnetic hyperthermia, as well as on electrochemical sensing toward the detection of neurotransmitter dopamine (DOP). Spherical magnetite nanoparticles (~13 nm) were prepared by co-precipitation and surface-modified with CA, APTES and DEX. The hyperthermia tests revealed that Fe3O4@APTES resulted in the highest specific absorption rate (SAR) of 67.2 W/g. The engineered sensor, by surface modification of screen-printed carbon (SPC) electrodes with Fe3O4@APTES, showed linear response with DOP in the concentration range of 1−200 μM and a low detection limit of 34.3 nM. Besides, the sensor offered remarkable selectivity, repeatability and reproducibility. Application of SPC-, Fe3O4-, Fe3O4@CA- and Fe3O4@DEX-modified SPC electrode resulted in lower electrocatalytic activity compared with Fe3O4@APTES/SPC. The obtained results indicate the effects of a surface modifier especially that Fe3O4@APTES, alone and combining with SPC electrodes, can serve as an agent in various types of biomedical applications, like hyperthermia and electrochemical sensing of biologically active compounds such as DOP.
T2  - Journal of Alloys and Compounds
T1  - The effect of surface-modifier of magnetite nanoparticles on electrochemical detection of dopamine and heating efficiency in magnetic hyperthermia
VL  - 884
SP  - 161075
DO  - 10.1016/j.jallcom.2021.161075
ER  - 

@article{
author = "Ognjanović, Miloš and Stanković, Dalibor and Jaćimović, Željko K. and Kosović-Perutović, Milica and Dojčinović, Biljana P. and Antić, Bratislav",
year = "2021",
abstract = "The citric acid (CA), dextran (DEX) and (3-aminopropyl)triethoxysilane (APTES) are frequently used ligands for surface modification of magnetite nanoparticles to improve their colloidal stability and biocompatibility for use in biomedicine. Here we report the synthesis, surface modification of magnetite (Fe3O4) nanoparticles and analysis of the influence of coating materials on heating efficiency in magnetic hyperthermia, as well as on electrochemical sensing toward the detection of neurotransmitter dopamine (DOP). Spherical magnetite nanoparticles (~13 nm) were prepared by co-precipitation and surface-modified with CA, APTES and DEX. The hyperthermia tests revealed that Fe3O4@APTES resulted in the highest specific absorption rate (SAR) of 67.2 W/g. The engineered sensor, by surface modification of screen-printed carbon (SPC) electrodes with Fe3O4@APTES, showed linear response with DOP in the concentration range of 1−200 μM and a low detection limit of 34.3 nM. Besides, the sensor offered remarkable selectivity, repeatability and reproducibility. Application of SPC-, Fe3O4-, Fe3O4@CA- and Fe3O4@DEX-modified SPC electrode resulted in lower electrocatalytic activity compared with Fe3O4@APTES/SPC. The obtained results indicate the effects of a surface modifier especially that Fe3O4@APTES, alone and combining with SPC electrodes, can serve as an agent in various types of biomedical applications, like hyperthermia and electrochemical sensing of biologically active compounds such as DOP.",
journal = "Journal of Alloys and Compounds",
title = "The effect of surface-modifier of magnetite nanoparticles on electrochemical detection of dopamine and heating efficiency in magnetic hyperthermia",
volume = "884",
pages = "161075",
doi = "10.1016/j.jallcom.2021.161075"
}

Ognjanović, M., Stanković, D., Jaćimović, Ž. K., Kosović-Perutović, M., Dojčinović, B. P.,& Antić, B.. (2021). The effect of surface-modifier of magnetite nanoparticles on electrochemical detection of dopamine and heating efficiency in magnetic hyperthermia. in Journal of Alloys and Compounds, 884, 161075.
https://doi.org/10.1016/j.jallcom.2021.161075

Ognjanović M, Stanković D, Jaćimović ŽK, Kosović-Perutović M, Dojčinović BP, Antić B. The effect of surface-modifier of magnetite nanoparticles on electrochemical detection of dopamine and heating efficiency in magnetic hyperthermia. in Journal of Alloys and Compounds. 2021;884:161075.
doi:10.1016/j.jallcom.2021.161075 .

Ognjanović, Miloš, Stanković, Dalibor, Jaćimović, Željko K., Kosović-Perutović, Milica, Dojčinović, Biljana P., Antić, Bratislav, "The effect of surface-modifier of magnetite nanoparticles on electrochemical detection of dopamine and heating efficiency in magnetic hyperthermia" in Journal of Alloys and Compounds, 884 (2021):161075,
https://doi.org/10.1016/j.jallcom.2021.161075 . .

TY  - JOUR
AU  - Stanković, Dalibor
AU  - Kukuruzar, Andrej
AU  - Savić, Slađana D.
AU  - Ognjannović, Miloš
AU  - Janković-Častvan, Ivona
AU  - Roglić, Goran
AU  - Antić, Bratislav
AU  - Manojlović, Dragan D.
AU  - Dojčinović, Biljana P.
PY  - 2021
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/4934
AB  - The textile industry is one of the major pollutants of waterbodies with effluents high in biochemical and chemical oxygen demand values, high values of total dissolved solids, total suspended solids, and low dissolved oxygen values along with strong color. The existence of a successful method for its decontamination would be beneficial. In this work, we synthesized sponge-like europium oxide (Eu2O3) using a template-directed route from carbon hollow spheres, obtained from glucose as a carbon source. The material synthesis method was done in an aqueous environment, without using any organic solvents. Electrochemical properties of the synthesized material were investigated using cyclic voltammetry and electrical impedance spectroscopy, while morphological characterization was done using scanning electron microscopy and X-ray powder diffraction analysis. Eu2O3 were successfully immobilized at the surface of a screen-printed carbon electrode (Eu2O3/SPCE) using the drop-casting method. Finally, the prepared electrodes were tested toward the removal of Reactive Blue 52 (RB52) using electrochemical advanced oxidation processes (EAOPs). Important parameters, that is, the supporting electrolyte, its concentration, pH value, and the applied voltage, were optimized for RB52 degradation. The rate of removal was monitored spectrophotometrically and by high-performance liquid chromatography with a diode array detector (HPLC-DAD). It was found that the proposed approach reaches complete decolorization of the RB52 solution after a 60-min treatment, at pH 5.6 of KCl supporting electrolyte at a concentration of 0.05 M. Under optimal parameters, after 3 h of treatment, total organic carbon (TOC) was lowered by ~40%. The obtained results indicate that the proposed method may find potential application in EAOPs, considering electrode stability, durability, and efficiency and simplicity of the method.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Sponge-like europium oxide from hollow carbon sphere as a template for an anode material for Reactive Blue 52 electrochemical degradation
VL  - 273
SP  - 125154
DO  - 10.1016/j.matchemphys.2021.125154
ER  - 

@article{
author = "Stanković, Dalibor and Kukuruzar, Andrej and Savić, Slađana D. and Ognjannović, Miloš and Janković-Častvan, Ivona and Roglić, Goran and Antić, Bratislav and Manojlović, Dragan D. and Dojčinović, Biljana P.",
year = "2021",
abstract = "The textile industry is one of the major pollutants of waterbodies with effluents high in biochemical and chemical oxygen demand values, high values of total dissolved solids, total suspended solids, and low dissolved oxygen values along with strong color. The existence of a successful method for its decontamination would be beneficial. In this work, we synthesized sponge-like europium oxide (Eu2O3) using a template-directed route from carbon hollow spheres, obtained from glucose as a carbon source. The material synthesis method was done in an aqueous environment, without using any organic solvents. Electrochemical properties of the synthesized material were investigated using cyclic voltammetry and electrical impedance spectroscopy, while morphological characterization was done using scanning electron microscopy and X-ray powder diffraction analysis. Eu2O3 were successfully immobilized at the surface of a screen-printed carbon electrode (Eu2O3/SPCE) using the drop-casting method. Finally, the prepared electrodes were tested toward the removal of Reactive Blue 52 (RB52) using electrochemical advanced oxidation processes (EAOPs). Important parameters, that is, the supporting electrolyte, its concentration, pH value, and the applied voltage, were optimized for RB52 degradation. The rate of removal was monitored spectrophotometrically and by high-performance liquid chromatography with a diode array detector (HPLC-DAD). It was found that the proposed approach reaches complete decolorization of the RB52 solution after a 60-min treatment, at pH 5.6 of KCl supporting electrolyte at a concentration of 0.05 M. Under optimal parameters, after 3 h of treatment, total organic carbon (TOC) was lowered by ~40%. The obtained results indicate that the proposed method may find potential application in EAOPs, considering electrode stability, durability, and efficiency and simplicity of the method.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Sponge-like europium oxide from hollow carbon sphere as a template for an anode material for Reactive Blue 52 electrochemical degradation",
volume = "273",
pages = "125154",
doi = "10.1016/j.matchemphys.2021.125154"
}

Stanković, D., Kukuruzar, A., Savić, S. D., Ognjannović, M., Janković-Častvan, I., Roglić, G., Antić, B., Manojlović, D. D.,& Dojčinović, B. P.. (2021). Sponge-like europium oxide from hollow carbon sphere as a template for an anode material for Reactive Blue 52 electrochemical degradation. in Materials Chemistry and Physics
Elsevier., 273, 125154.
https://doi.org/10.1016/j.matchemphys.2021.125154

Stanković D, Kukuruzar A, Savić SD, Ognjannović M, Janković-Častvan I, Roglić G, Antić B, Manojlović DD, Dojčinović BP. Sponge-like europium oxide from hollow carbon sphere as a template for an anode material for Reactive Blue 52 electrochemical degradation. in Materials Chemistry and Physics. 2021;273:125154.
doi:10.1016/j.matchemphys.2021.125154 .

Stanković, Dalibor, Kukuruzar, Andrej, Savić, Slađana D., Ognjannović, Miloš, Janković-Častvan, Ivona, Roglić, Goran, Antić, Bratislav, Manojlović, Dragan D., Dojčinović, Biljana P., "Sponge-like europium oxide from hollow carbon sphere as a template for an anode material for Reactive Blue 52 electrochemical degradation" in Materials Chemistry and Physics, 273 (2021):125154,
https://doi.org/10.1016/j.matchemphys.2021.125154 . .

TY  - JOUR
AU  - Stanković, Dalibor
AU  - Kukuruzar, Andrej
AU  - Savić, Slađana D.
AU  - Ognjannović, Miloš
AU  - Janković-Častvan, Ivona
AU  - Roglić, Goran
AU  - Antić, Bratislav
AU  - Manojlović, Dragan D.
AU  - Dojčinović, Biljana P.
PY  - 2021
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/4935
AB  - The textile industry is one of the major pollutants of waterbodies with effluents high in biochemical and chemical oxygen demand values, high values of total dissolved solids, total suspended solids, and low dissolved oxygen values along with strong color. The existence of a successful method for its decontamination would be beneficial. In this work, we synthesized sponge-like europium oxide (Eu2O3) using a template-directed route from carbon hollow spheres, obtained from glucose as a carbon source. The material synthesis method was done in an aqueous environment, without using any organic solvents. Electrochemical properties of the synthesized material were investigated using cyclic voltammetry and electrical impedance spectroscopy, while morphological characterization was done using scanning electron microscopy and X-ray powder diffraction analysis. Eu2O3 were successfully immobilized at the surface of a screen-printed carbon electrode (Eu2O3/SPCE) using the drop-casting method. Finally, the prepared electrodes were tested toward the removal of Reactive Blue 52 (RB52) using electrochemical advanced oxidation processes (EAOPs). Important parameters, that is, the supporting electrolyte, its concentration, pH value, and the applied voltage, were optimized for RB52 degradation. The rate of removal was monitored spectrophotometrically and by high-performance liquid chromatography with a diode array detector (HPLC-DAD). It was found that the proposed approach reaches complete decolorization of the RB52 solution after a 60-min treatment, at pH 5.6 of KCl supporting electrolyte at a concentration of 0.05 M. Under optimal parameters, after 3 h of treatment, total organic carbon (TOC) was lowered by ~40%. The obtained results indicate that the proposed method may find potential application in EAOPs, considering electrode stability, durability, and efficiency and simplicity of the method.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Sponge-like europium oxide from hollow carbon sphere as a template for an anode material for Reactive Blue 52 electrochemical degradation
VL  - 273
SP  - 125154
DO  - 10.1016/j.matchemphys.2021.125154
ER  - 

@article{
author = "Stanković, Dalibor and Kukuruzar, Andrej and Savić, Slađana D. and Ognjannović, Miloš and Janković-Častvan, Ivona and Roglić, Goran and Antić, Bratislav and Manojlović, Dragan D. and Dojčinović, Biljana P.",
year = "2021",
abstract = "The textile industry is one of the major pollutants of waterbodies with effluents high in biochemical and chemical oxygen demand values, high values of total dissolved solids, total suspended solids, and low dissolved oxygen values along with strong color. The existence of a successful method for its decontamination would be beneficial. In this work, we synthesized sponge-like europium oxide (Eu2O3) using a template-directed route from carbon hollow spheres, obtained from glucose as a carbon source. The material synthesis method was done in an aqueous environment, without using any organic solvents. Electrochemical properties of the synthesized material were investigated using cyclic voltammetry and electrical impedance spectroscopy, while morphological characterization was done using scanning electron microscopy and X-ray powder diffraction analysis. Eu2O3 were successfully immobilized at the surface of a screen-printed carbon electrode (Eu2O3/SPCE) using the drop-casting method. Finally, the prepared electrodes were tested toward the removal of Reactive Blue 52 (RB52) using electrochemical advanced oxidation processes (EAOPs). Important parameters, that is, the supporting electrolyte, its concentration, pH value, and the applied voltage, were optimized for RB52 degradation. The rate of removal was monitored spectrophotometrically and by high-performance liquid chromatography with a diode array detector (HPLC-DAD). It was found that the proposed approach reaches complete decolorization of the RB52 solution after a 60-min treatment, at pH 5.6 of KCl supporting electrolyte at a concentration of 0.05 M. Under optimal parameters, after 3 h of treatment, total organic carbon (TOC) was lowered by ~40%. The obtained results indicate that the proposed method may find potential application in EAOPs, considering electrode stability, durability, and efficiency and simplicity of the method.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Sponge-like europium oxide from hollow carbon sphere as a template for an anode material for Reactive Blue 52 electrochemical degradation",
volume = "273",
pages = "125154",
doi = "10.1016/j.matchemphys.2021.125154"
}

Stanković, D., Kukuruzar, A., Savić, S. D., Ognjannović, M., Janković-Častvan, I., Roglić, G., Antić, B., Manojlović, D. D.,& Dojčinović, B. P.. (2021). Sponge-like europium oxide from hollow carbon sphere as a template for an anode material for Reactive Blue 52 electrochemical degradation. in Materials Chemistry and Physics
Elsevier., 273, 125154.
https://doi.org/10.1016/j.matchemphys.2021.125154

Stanković D, Kukuruzar A, Savić SD, Ognjannović M, Janković-Častvan I, Roglić G, Antić B, Manojlović DD, Dojčinović BP. Sponge-like europium oxide from hollow carbon sphere as a template for an anode material for Reactive Blue 52 electrochemical degradation. in Materials Chemistry and Physics. 2021;273:125154.
doi:10.1016/j.matchemphys.2021.125154 .

Stanković, Dalibor, Kukuruzar, Andrej, Savić, Slađana D., Ognjannović, Miloš, Janković-Častvan, Ivona, Roglić, Goran, Antić, Bratislav, Manojlović, Dragan D., Dojčinović, Biljana P., "Sponge-like europium oxide from hollow carbon sphere as a template for an anode material for Reactive Blue 52 electrochemical degradation" in Materials Chemistry and Physics, 273 (2021):125154,
https://doi.org/10.1016/j.matchemphys.2021.125154 . .

TY  - JOUR
AU  - Petković, Branka B.
AU  - Ognjanović, Miloš
AU  - Antić, Bratislav
AU  - Viktorovich Avdin, Vyacheslav
AU  - Manojlović, Dragan D.
AU  - Vranješ-Đurić, Sanja
AU  - Stanković, Dalibor
PY  - 2021
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/4818
AB  - The homemade, porous carbon material, thermolysis prepared from Novolac phenol-formaldehyde resin, in situ modified with Co3O4 nanoparticles and mixed with single-wall carbon nanotubes, was used in selective sensing of prominent antioxidant α-lipoic acid (LA). XRD, SEM and EIS measurements were used for characterization of material composition, structure, morphology and improved conductivity. The quantification of LA at TPCo3O4&SWCNTCPE was done by a square-wave voltammetric technique in BR buffer solution at pH 6. The linear working range was recorded from 2 to 100 μM of LA and the proposed electrode material was successfully applied in the determination of LA in dietary supplements.
PB  - Wiley
T2  - Electroanalysis
T1  - Easily Prepared Co3O4 Doped Porous Carbon Material Decorated with Single-wall Carbon Nanotubes Applied in Voltammetric Sensing of Antioxidant α-lipoic Acid
VL  - 33
IS  - 2
SP  - 446
EP  - 454
DO  - 10.1002/elan.202060290
ER  - 

@article{
author = "Petković, Branka B. and Ognjanović, Miloš and Antić, Bratislav and Viktorovich Avdin, Vyacheslav and Manojlović, Dragan D. and Vranješ-Đurić, Sanja and Stanković, Dalibor",
year = "2021",
abstract = "The homemade, porous carbon material, thermolysis prepared from Novolac phenol-formaldehyde resin, in situ modified with Co3O4 nanoparticles and mixed with single-wall carbon nanotubes, was used in selective sensing of prominent antioxidant α-lipoic acid (LA). XRD, SEM and EIS measurements were used for characterization of material composition, structure, morphology and improved conductivity. The quantification of LA at TPCo3O4&SWCNTCPE was done by a square-wave voltammetric technique in BR buffer solution at pH 6. The linear working range was recorded from 2 to 100 μM of LA and the proposed electrode material was successfully applied in the determination of LA in dietary supplements.",
publisher = "Wiley",
journal = "Electroanalysis",
title = "Easily Prepared Co3O4 Doped Porous Carbon Material Decorated with Single-wall Carbon Nanotubes Applied in Voltammetric Sensing of Antioxidant α-lipoic Acid",
volume = "33",
number = "2",
pages = "446-454",
doi = "10.1002/elan.202060290"
}

Petković, B. B., Ognjanović, M., Antić, B., Viktorovich Avdin, V., Manojlović, D. D., Vranješ-Đurić, S.,& Stanković, D.. (2021). Easily Prepared Co3O4 Doped Porous Carbon Material Decorated with Single-wall Carbon Nanotubes Applied in Voltammetric Sensing of Antioxidant α-lipoic Acid. in Electroanalysis
Wiley., 33(2), 446-454.
https://doi.org/10.1002/elan.202060290

Petković BB, Ognjanović M, Antić B, Viktorovich Avdin V, Manojlović DD, Vranješ-Đurić S, Stanković D. Easily Prepared Co3O4 Doped Porous Carbon Material Decorated with Single-wall Carbon Nanotubes Applied in Voltammetric Sensing of Antioxidant α-lipoic Acid. in Electroanalysis. 2021;33(2):446-454.
doi:10.1002/elan.202060290 .

Petković, Branka B., Ognjanović, Miloš, Antić, Bratislav, Viktorovich Avdin, Vyacheslav, Manojlović, Dragan D., Vranješ-Đurić, Sanja, Stanković, Dalibor, "Easily Prepared Co3O4 Doped Porous Carbon Material Decorated with Single-wall Carbon Nanotubes Applied in Voltammetric Sensing of Antioxidant α-lipoic Acid" in Electroanalysis, 33, no. 2 (2021):446-454,
https://doi.org/10.1002/elan.202060290 . .

TY  - JOUR
AU  - Stanković, Vesna
AU  - Đurđić, Slađana Z.
AU  - Ognjanović, Miloš
AU  - Antić, Bratislav
AU  - Kalcher, Kurt
AU  - Mutić, Jelena
AU  - Stanković, Dalibor
PY  - 2020
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/3881
AB  - Diagnosis and treatment of some important diseased and metabolic disorders is based on successful detection of albumin. In this work, we aim to develop a simple immunosensor for the detection of human serum albumin in biological fluids. Anti-human albumin antibody was covalently attached to the activated surface of screen-printed carbon electrodes enriched with carboxyl graphene/gold nanoparticles composite. Microstructure (TEM, FE-SEM, XRD) and electrochemical (CV, EIS) characterization methods were used to investigate composite properties and to confirm the successful modification of the electrodes. Under the optimal conditions, linear working range and limit of detection were 2.5–500 μg/mL and 1.55 μg/mL, respectively. Additionally, the effect of some possibly interfering compounds was investigated and the immunosensor was used for real sample analysis. The results showed that the sensor exhibited accurate, precise and sensitive characteristics and can be promising replacement to the convention methods for albumin detection in clinical practice.
PB  - Elsevier
T2  - Journal of Electroanalytical Chemistry
T1  - Anti-human albumin monoclonal antibody immobilized on EDC-NHS functionalized carboxylic graphene/AuNPs composite as promising electrochemical HSA immunosensor
VL  - 860
DO  - 10.1016/j.jelechem.2020.113928
ER  - 

@article{
author = "Stanković, Vesna and Đurđić, Slađana Z. and Ognjanović, Miloš and Antić, Bratislav and Kalcher, Kurt and Mutić, Jelena and Stanković, Dalibor",
year = "2020",
abstract = "Diagnosis and treatment of some important diseased and metabolic disorders is based on successful detection of albumin. In this work, we aim to develop a simple immunosensor for the detection of human serum albumin in biological fluids. Anti-human albumin antibody was covalently attached to the activated surface of screen-printed carbon electrodes enriched with carboxyl graphene/gold nanoparticles composite. Microstructure (TEM, FE-SEM, XRD) and electrochemical (CV, EIS) characterization methods were used to investigate composite properties and to confirm the successful modification of the electrodes. Under the optimal conditions, linear working range and limit of detection were 2.5–500 μg/mL and 1.55 μg/mL, respectively. Additionally, the effect of some possibly interfering compounds was investigated and the immunosensor was used for real sample analysis. The results showed that the sensor exhibited accurate, precise and sensitive characteristics and can be promising replacement to the convention methods for albumin detection in clinical practice.",
publisher = "Elsevier",
journal = "Journal of Electroanalytical Chemistry",
title = "Anti-human albumin monoclonal antibody immobilized on EDC-NHS functionalized carboxylic graphene/AuNPs composite as promising electrochemical HSA immunosensor",
volume = "860",
doi = "10.1016/j.jelechem.2020.113928"
}

Stanković, V., Đurđić, S. Z., Ognjanović, M., Antić, B., Kalcher, K., Mutić, J.,& Stanković, D.. (2020). Anti-human albumin monoclonal antibody immobilized on EDC-NHS functionalized carboxylic graphene/AuNPs composite as promising electrochemical HSA immunosensor. in Journal of Electroanalytical Chemistry
Elsevier., 860.
https://doi.org/10.1016/j.jelechem.2020.113928

Stanković V, Đurđić SZ, Ognjanović M, Antić B, Kalcher K, Mutić J, Stanković D. Anti-human albumin monoclonal antibody immobilized on EDC-NHS functionalized carboxylic graphene/AuNPs composite as promising electrochemical HSA immunosensor. in Journal of Electroanalytical Chemistry. 2020;860.
doi:10.1016/j.jelechem.2020.113928 .

Stanković, Vesna, Đurđić, Slađana Z., Ognjanović, Miloš, Antić, Bratislav, Kalcher, Kurt, Mutić, Jelena, Stanković, Dalibor, "Anti-human albumin monoclonal antibody immobilized on EDC-NHS functionalized carboxylic graphene/AuNPs composite as promising electrochemical HSA immunosensor" in Journal of Electroanalytical Chemistry, 860 (2020),
https://doi.org/10.1016/j.jelechem.2020.113928 . .

TY  - JOUR
AU  - Stanković, Vesna
AU  - Đurđić, Slađana Z.
AU  - Ognjanović, Miloš
AU  - Antić, Bratislav
AU  - Kalcher, Kurt
AU  - Mutić, Jelena
AU  - Stanković, Dalibor
PY  - 2020
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/3891
AB  - Diagnosis and treatment of some important diseased and metabolic disorders is based on successful detection of albumin. In this work, we aim to develop a simple immunosensor for the detection of human serum albumin in biological fluids. Anti-human albumin antibody was covalently attached to the activated surface of screen-printed carbon electrodes enriched with carboxyl graphene/gold nanoparticles composite. Microstructure (TEM, FE-SEM, XRD) and electrochemical (CV, EIS) characterization methods were used to investigate composite properties and to confirm the successful modification of the electrodes. Under the optimal conditions, linear working range and limit of detection were 2.5–500 μg/mL and 1.55 μg/mL, respectively. Additionally, the effect of some possibly interfering compounds was investigated and the immunosensor was used for real sample analysis. The results showed that the sensor exhibited accurate, precise and sensitive characteristics and can be promising replacement to the convention methods for albumin detection in clinical practice.
PB  - Elsevier
T2  - Journal of Electroanalytical Chemistry
T1  - Anti-human albumin monoclonal antibody immobilized on EDC-NHS functionalized carboxylic graphene/AuNPs composite as promising electrochemical HSA immunosensor
VL  - 860
SP  - 113928
DO  - 10.1016/j.jelechem.2020.113928
ER  - 

@article{
author = "Stanković, Vesna and Đurđić, Slađana Z. and Ognjanović, Miloš and Antić, Bratislav and Kalcher, Kurt and Mutić, Jelena and Stanković, Dalibor",
year = "2020",
abstract = "Diagnosis and treatment of some important diseased and metabolic disorders is based on successful detection of albumin. In this work, we aim to develop a simple immunosensor for the detection of human serum albumin in biological fluids. Anti-human albumin antibody was covalently attached to the activated surface of screen-printed carbon electrodes enriched with carboxyl graphene/gold nanoparticles composite. Microstructure (TEM, FE-SEM, XRD) and electrochemical (CV, EIS) characterization methods were used to investigate composite properties and to confirm the successful modification of the electrodes. Under the optimal conditions, linear working range and limit of detection were 2.5–500 μg/mL and 1.55 μg/mL, respectively. Additionally, the effect of some possibly interfering compounds was investigated and the immunosensor was used for real sample analysis. The results showed that the sensor exhibited accurate, precise and sensitive characteristics and can be promising replacement to the convention methods for albumin detection in clinical practice.",
publisher = "Elsevier",
journal = "Journal of Electroanalytical Chemistry",
title = "Anti-human albumin monoclonal antibody immobilized on EDC-NHS functionalized carboxylic graphene/AuNPs composite as promising electrochemical HSA immunosensor",
volume = "860",
pages = "113928",
doi = "10.1016/j.jelechem.2020.113928"
}

Stanković, V., Đurđić, S. Z., Ognjanović, M., Antić, B., Kalcher, K., Mutić, J.,& Stanković, D.. (2020). Anti-human albumin monoclonal antibody immobilized on EDC-NHS functionalized carboxylic graphene/AuNPs composite as promising electrochemical HSA immunosensor. in Journal of Electroanalytical Chemistry
Elsevier., 860, 113928.
https://doi.org/10.1016/j.jelechem.2020.113928

Stanković V, Đurđić SZ, Ognjanović M, Antić B, Kalcher K, Mutić J, Stanković D. Anti-human albumin monoclonal antibody immobilized on EDC-NHS functionalized carboxylic graphene/AuNPs composite as promising electrochemical HSA immunosensor. in Journal of Electroanalytical Chemistry. 2020;860:113928.
doi:10.1016/j.jelechem.2020.113928 .

Stanković, Vesna, Đurđić, Slađana Z., Ognjanović, Miloš, Antić, Bratislav, Kalcher, Kurt, Mutić, Jelena, Stanković, Dalibor, "Anti-human albumin monoclonal antibody immobilized on EDC-NHS functionalized carboxylic graphene/AuNPs composite as promising electrochemical HSA immunosensor" in Journal of Electroanalytical Chemistry, 860 (2020):113928,
https://doi.org/10.1016/j.jelechem.2020.113928 . .

TY  - DATA
AU  - Stanković, Vesna
AU  - Đurđić, Slađana Z.
AU  - Ognjanović, Miloš
AU  - Antić, Bratislav
AU  - Kalcher, Kurt
AU  - Mutić, Jelena
AU  - Stanković, Dalibor
PY  - 2020
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/3892
PB  - Elsevier
T2  - Journal of Electroanalytical Chemistry
T1  - Supplementary data for the article: Stanković, V.; Đurđić, S.; Ognjanović, M.; Antić, B.; Kalcher, K.; Mutić, J.; Stanković, D. M. Anti-Human Albumin Monoclonal Antibody Immobilized on EDC-NHS Functionalized Carboxylic Graphene/AuNPs Composite as Promising Electrochemical HSA Immunosensor. Journal of Electroanalytical Chemistry 2020, 860. https://doi.org/10.1016/j.jelechem.2020.113928
UR  - https://hdl.handle.net/21.15107/rcub_cherry_3892
ER  - 

@misc{
author = "Stanković, Vesna and Đurđić, Slađana Z. and Ognjanović, Miloš and Antić, Bratislav and Kalcher, Kurt and Mutić, Jelena and Stanković, Dalibor",
year = "2020",
publisher = "Elsevier",
journal = "Journal of Electroanalytical Chemistry",
title = "Supplementary data for the article: Stanković, V.; Đurđić, S.; Ognjanović, M.; Antić, B.; Kalcher, K.; Mutić, J.; Stanković, D. M. Anti-Human Albumin Monoclonal Antibody Immobilized on EDC-NHS Functionalized Carboxylic Graphene/AuNPs Composite as Promising Electrochemical HSA Immunosensor. Journal of Electroanalytical Chemistry 2020, 860. https://doi.org/10.1016/j.jelechem.2020.113928",
url = "https://hdl.handle.net/21.15107/rcub_cherry_3892"
}

Stanković, V., Đurđić, S. Z., Ognjanović, M., Antić, B., Kalcher, K., Mutić, J.,& Stanković, D.. (2020). Supplementary data for the article: Stanković, V.; Đurđić, S.; Ognjanović, M.; Antić, B.; Kalcher, K.; Mutić, J.; Stanković, D. M. Anti-Human Albumin Monoclonal Antibody Immobilized on EDC-NHS Functionalized Carboxylic Graphene/AuNPs Composite as Promising Electrochemical HSA Immunosensor. Journal of Electroanalytical Chemistry 2020, 860. https://doi.org/10.1016/j.jelechem.2020.113928. in Journal of Electroanalytical Chemistry
Elsevier..
https://hdl.handle.net/21.15107/rcub_cherry_3892

Stanković V, Đurđić SZ, Ognjanović M, Antić B, Kalcher K, Mutić J, Stanković D. Supplementary data for the article: Stanković, V.; Đurđić, S.; Ognjanović, M.; Antić, B.; Kalcher, K.; Mutić, J.; Stanković, D. M. Anti-Human Albumin Monoclonal Antibody Immobilized on EDC-NHS Functionalized Carboxylic Graphene/AuNPs Composite as Promising Electrochemical HSA Immunosensor. Journal of Electroanalytical Chemistry 2020, 860. https://doi.org/10.1016/j.jelechem.2020.113928. in Journal of Electroanalytical Chemistry. 2020;.
https://hdl.handle.net/21.15107/rcub_cherry_3892 .

Stanković, Vesna, Đurđić, Slađana Z., Ognjanović, Miloš, Antić, Bratislav, Kalcher, Kurt, Mutić, Jelena, Stanković, Dalibor, "Supplementary data for the article: Stanković, V.; Đurđić, S.; Ognjanović, M.; Antić, B.; Kalcher, K.; Mutić, J.; Stanković, D. M. Anti-Human Albumin Monoclonal Antibody Immobilized on EDC-NHS Functionalized Carboxylic Graphene/AuNPs Composite as Promising Electrochemical HSA Immunosensor. Journal of Electroanalytical Chemistry 2020, 860. https://doi.org/10.1016/j.jelechem.2020.113928" in Journal of Electroanalytical Chemistry (2020),
https://hdl.handle.net/21.15107/rcub_cherry_3892 .

TY  - JOUR
AU  - Ognjanović, Miloš
AU  - Stanković, Vesna
AU  - Knežević, Sara
AU  - Antić, Bratislav
AU  - Vranješ-Đurić, Sanja
AU  - Stanković, Dalibor
PY  - 2020
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/4023
AB  - Herein, we proposed a novel approach and state-of-the-art technology for the improvement of the materials and enzyme immobilization at the electrode surface and construction of impedimetric glucose biosensor. We silanized titanium dioxide nanoparticles using (3-aminopropyl)triethoxysilane (APTES), for the preparation of cross-linked material nanoparticles, with carboxylic graphene. The silanization of titanium dioxide nanoparticles and an increase in electron shuttle was proven feasible when this composite was able to achieve about 30% higher current than non-silanized material. The proposed approach was used for the modification of the printed three-electrode system and the development of the impedimetric glucose biosensor. The material morphology and electrochemical characteristics were confirmed by spectroscopic and electrochemical methods. The present combination effectively modified the electrode surface and serve as a promising basis for the construction of Point-of-Care devices. Developed biosensor possesses wide operating linear range toward glucose detection from 50 µmol to 1000 µmol, with the limit of detection of 24 µmol. Finally, negligible interference effect and application in the real sample indicate that the proposed mechanism can be successfully applied to the assessment of glucose level in only one drop of real sample.
PB  - Elsevier
T2  - Microchemical Journal
T1  - TiO2/APTES cross-linked to carboxylic graphene based impedimetric glucose biosensor
VL  - 158
DO  - 10.1016/j.microc.2020.105150
ER  - 

@article{
author = "Ognjanović, Miloš and Stanković, Vesna and Knežević, Sara and Antić, Bratislav and Vranješ-Đurić, Sanja and Stanković, Dalibor",
year = "2020",
abstract = "Herein, we proposed a novel approach and state-of-the-art technology for the improvement of the materials and enzyme immobilization at the electrode surface and construction of impedimetric glucose biosensor. We silanized titanium dioxide nanoparticles using (3-aminopropyl)triethoxysilane (APTES), for the preparation of cross-linked material nanoparticles, with carboxylic graphene. The silanization of titanium dioxide nanoparticles and an increase in electron shuttle was proven feasible when this composite was able to achieve about 30% higher current than non-silanized material. The proposed approach was used for the modification of the printed three-electrode system and the development of the impedimetric glucose biosensor. The material morphology and electrochemical characteristics were confirmed by spectroscopic and electrochemical methods. The present combination effectively modified the electrode surface and serve as a promising basis for the construction of Point-of-Care devices. Developed biosensor possesses wide operating linear range toward glucose detection from 50 µmol to 1000 µmol, with the limit of detection of 24 µmol. Finally, negligible interference effect and application in the real sample indicate that the proposed mechanism can be successfully applied to the assessment of glucose level in only one drop of real sample.",
publisher = "Elsevier",
journal = "Microchemical Journal",
title = "TiO2/APTES cross-linked to carboxylic graphene based impedimetric glucose biosensor",
volume = "158",
doi = "10.1016/j.microc.2020.105150"
}

Ognjanović, M., Stanković, V., Knežević, S., Antić, B., Vranješ-Đurić, S.,& Stanković, D.. (2020). TiO2/APTES cross-linked to carboxylic graphene based impedimetric glucose biosensor. in Microchemical Journal
Elsevier., 158.
https://doi.org/10.1016/j.microc.2020.105150

Ognjanović M, Stanković V, Knežević S, Antić B, Vranješ-Đurić S, Stanković D. TiO2/APTES cross-linked to carboxylic graphene based impedimetric glucose biosensor. in Microchemical Journal. 2020;158.
doi:10.1016/j.microc.2020.105150 .

Ognjanović, Miloš, Stanković, Vesna, Knežević, Sara, Antić, Bratislav, Vranješ-Đurić, Sanja, Stanković, Dalibor, "TiO2/APTES cross-linked to carboxylic graphene based impedimetric glucose biosensor" in Microchemical Journal, 158 (2020),
https://doi.org/10.1016/j.microc.2020.105150 . .

TY  - JOUR
AU  - Knežević, Sara
AU  - Ognjanović, Miloš
AU  - Nedić, Nemanja
AU  - Mariano, José F.M.L.
AU  - Milanović, Zorana
AU  - Petković, Branka B.
AU  - Antić, Bratislav
AU  - Vranješ-Đurić, Sanja
AU  - Stanković, Dalibor
PY  - 2020
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/3880
AB  - In order to ensure high food quality, one of the prime importance is the detection and quantification of histamine, well known marine food poison. In this work, we constructed novel electrochemical biosensor for the detection of histamine based on gold nanoparticles decorated on manganese dioxide (Au/MnO2) and used for modification of screen-printed carbon electrode (Au/MnO2@SPCE). The constructed sensor was then used for the estimation of histamine content in a single drop. Materials used in this study were synthesized and characterized using HR-TEM, XRPD and electrochemical methods. The amperometric detection method was optimized and, under selected operating parameters (supporting electrolyte pH 6, working potential of 1 V), the proposed sensor possesses linear working range from 0.3 µM to 5.1 µM, with a detection limit of 0.08 µM. The effect of selected interferences was investigated and it was found that the developed approach offers accurate, precise, selective, fast and reproducible quantification of histamine using only one drop of the sample. In the end, this work stands as a proof-of-concept of the modified electrodes and electrochemical detection as a promising and prospective approach for the applications in real-time monitoring of the food quality.
PB  - Elsevier
T2  - Microchemical Journal
T1  - A single drop histamine sensor based on AuNPs/MnO2 modified screen-printed electrode
VL  - 155
DO  - 10.1016/j.microc.2020.104778
ER  - 

@article{
author = "Knežević, Sara and Ognjanović, Miloš and Nedić, Nemanja and Mariano, José F.M.L. and Milanović, Zorana and Petković, Branka B. and Antić, Bratislav and Vranješ-Đurić, Sanja and Stanković, Dalibor",
year = "2020",
abstract = "In order to ensure high food quality, one of the prime importance is the detection and quantification of histamine, well known marine food poison. In this work, we constructed novel electrochemical biosensor for the detection of histamine based on gold nanoparticles decorated on manganese dioxide (Au/MnO2) and used for modification of screen-printed carbon electrode (Au/MnO2@SPCE). The constructed sensor was then used for the estimation of histamine content in a single drop. Materials used in this study were synthesized and characterized using HR-TEM, XRPD and electrochemical methods. The amperometric detection method was optimized and, under selected operating parameters (supporting electrolyte pH 6, working potential of 1 V), the proposed sensor possesses linear working range from 0.3 µM to 5.1 µM, with a detection limit of 0.08 µM. The effect of selected interferences was investigated and it was found that the developed approach offers accurate, precise, selective, fast and reproducible quantification of histamine using only one drop of the sample. In the end, this work stands as a proof-of-concept of the modified electrodes and electrochemical detection as a promising and prospective approach for the applications in real-time monitoring of the food quality.",
publisher = "Elsevier",
journal = "Microchemical Journal",
title = "A single drop histamine sensor based on AuNPs/MnO2 modified screen-printed electrode",
volume = "155",
doi = "10.1016/j.microc.2020.104778"
}

Knežević, S., Ognjanović, M., Nedić, N., Mariano, J. F.M.L., Milanović, Z., Petković, B. B., Antić, B., Vranješ-Đurić, S.,& Stanković, D.. (2020). A single drop histamine sensor based on AuNPs/MnO2 modified screen-printed electrode. in Microchemical Journal
Elsevier., 155.
https://doi.org/10.1016/j.microc.2020.104778

Knežević S, Ognjanović M, Nedić N, Mariano JF, Milanović Z, Petković BB, Antić B, Vranješ-Đurić S, Stanković D. A single drop histamine sensor based on AuNPs/MnO2 modified screen-printed electrode. in Microchemical Journal. 2020;155.
doi:10.1016/j.microc.2020.104778 .

Knežević, Sara, Ognjanović, Miloš, Nedić, Nemanja, Mariano, José F.M.L., Milanović, Zorana, Petković, Branka B., Antić, Bratislav, Vranješ-Đurić, Sanja, Stanković, Dalibor, "A single drop histamine sensor based on AuNPs/MnO2 modified screen-printed electrode" in Microchemical Journal, 155 (2020),
https://doi.org/10.1016/j.microc.2020.104778 . .

TY  - DATA
AU  - Ognjanović, Miloš
AU  - Stanković, Dalibor
AU  - Ming, Yue
AU  - Zhang, Hongguo
AU  - Jančar, B.
AU  - Dojčinović, Biljana P.
AU  - Prijović, Željko
AU  - Antić, Bratislav
PY  - 2019
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/2953
T2  - Journal of Alloys and Compounds
T1  - Supplementary data for the article: Ognjanović, M.; Stanković, D.; Ming, Y.; Zhang, H.; Jančar, B.; Dojčinović, B. P.; Prijović, Ž.; Antić, B. Bifunctional (Zn,Fe)3O4 Nanoparticles: Tuning Their Efficiency for Potential Application in Reagentless Glucose Biosensors and Magnetic Hyperthermia. Journal of Alloys and Compounds 2019, 777, 454–462. https://doi.org/10.1016/j.jallcom.2018.10.369
UR  - https://hdl.handle.net/21.15107/rcub_cherry_2953
ER  - 

@misc{
author = "Ognjanović, Miloš and Stanković, Dalibor and Ming, Yue and Zhang, Hongguo and Jančar, B. and Dojčinović, Biljana P. and Prijović, Željko and Antić, Bratislav",
year = "2019",
journal = "Journal of Alloys and Compounds",
title = "Supplementary data for the article: Ognjanović, M.; Stanković, D.; Ming, Y.; Zhang, H.; Jančar, B.; Dojčinović, B. P.; Prijović, Ž.; Antić, B. Bifunctional (Zn,Fe)3O4 Nanoparticles: Tuning Their Efficiency for Potential Application in Reagentless Glucose Biosensors and Magnetic Hyperthermia. Journal of Alloys and Compounds 2019, 777, 454–462. https://doi.org/10.1016/j.jallcom.2018.10.369",
url = "https://hdl.handle.net/21.15107/rcub_cherry_2953"
}

Ognjanović, M., Stanković, D., Ming, Y., Zhang, H., Jančar, B., Dojčinović, B. P., Prijović, Ž.,& Antić, B.. (2019). Supplementary data for the article: Ognjanović, M.; Stanković, D.; Ming, Y.; Zhang, H.; Jančar, B.; Dojčinović, B. P.; Prijović, Ž.; Antić, B. Bifunctional (Zn,Fe)3O4 Nanoparticles: Tuning Their Efficiency for Potential Application in Reagentless Glucose Biosensors and Magnetic Hyperthermia. Journal of Alloys and Compounds 2019, 777, 454–462. https://doi.org/10.1016/j.jallcom.2018.10.369. in Journal of Alloys and Compounds.
https://hdl.handle.net/21.15107/rcub_cherry_2953

Ognjanović M, Stanković D, Ming Y, Zhang H, Jančar B, Dojčinović BP, Prijović Ž, Antić B. Supplementary data for the article: Ognjanović, M.; Stanković, D.; Ming, Y.; Zhang, H.; Jančar, B.; Dojčinović, B. P.; Prijović, Ž.; Antić, B. Bifunctional (Zn,Fe)3O4 Nanoparticles: Tuning Their Efficiency for Potential Application in Reagentless Glucose Biosensors and Magnetic Hyperthermia. Journal of Alloys and Compounds 2019, 777, 454–462. https://doi.org/10.1016/j.jallcom.2018.10.369. in Journal of Alloys and Compounds. 2019;.
https://hdl.handle.net/21.15107/rcub_cherry_2953 .

Ognjanović, Miloš, Stanković, Dalibor, Ming, Yue, Zhang, Hongguo, Jančar, B., Dojčinović, Biljana P., Prijović, Željko, Antić, Bratislav, "Supplementary data for the article: Ognjanović, M.; Stanković, D.; Ming, Y.; Zhang, H.; Jančar, B.; Dojčinović, B. P.; Prijović, Ž.; Antić, B. Bifunctional (Zn,Fe)3O4 Nanoparticles: Tuning Their Efficiency for Potential Application in Reagentless Glucose Biosensors and Magnetic Hyperthermia. Journal of Alloys and Compounds 2019, 777, 454–462. https://doi.org/10.1016/j.jallcom.2018.10.369" in Journal of Alloys and Compounds (2019),
https://hdl.handle.net/21.15107/rcub_cherry_2953 .

TY  - JOUR
AU  - Ognjanović, Miloš
AU  - Stanković, Dalibor
AU  - Ming, Yue
AU  - Zhang, Hongguo
AU  - Jančar, B.
AU  - Dojčinović, Biljana P.
AU  - Prijović, Željko
AU  - Antić, Bratislav
PY  - 2019
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/361
AB  - In a new approach based on a two-step procedure, co-precipitation method followed by hydrothermal treatment in a microwave field, Zn-substituted Fe3O4 nanoparticles (ZnxFe3-xO4) were synthesized. Results of XRD, FT–IR and TEM analysis clearly demonstrate that nanoparticles were single phase, crystallizing in the spinel structure type (S.G. Fd3¯m) with crystallite size in the range of 2–20 nm, which strongly depends on Zn concentration. The produced nanoparticles were used for fabrication of modified carbon paste electrodes as a novel system for electrochemical non-enzymatic glucose detection. It was found that the increase of zinc concentration up to the value of x = 0.56 (Zn0.56Fe2.44O4) of as-prepared nanoparticles was followed with an increase of a performance of the modified carbon paste electrode toward glucose detection. Linear working range from 0.1 to 2 mM was obtained with detection limit of 0.03 mM, and with fast response time (<3 s). Proposed sensor was successfully applied for the determination of glucose level in real samples with satisfactory recovery. The synthesized zinc-ferrite samples were also tested as potential heating agents in magnetic hyperthermia. The heating ability (SAR value) increases with x value, reaching maximum for x = 0.37. This is correlated with changes of particle size and magnetic characteristics which strongly depend on Zn concentration. © 2018 Elsevier B.V.
T2  - Journal of Alloys and Compounds
T1  - Bifunctional (Zn,Fe)3O4 nanoparticles: Tuning their efficiency for potential application in reagentless glucose biosensors and magnetic hyperthermia
VL  - 777
SP  - 454
EP  - 462
DO  - 10.1016/j.jallcom.2018.10.369
ER  - 

@article{
author = "Ognjanović, Miloš and Stanković, Dalibor and Ming, Yue and Zhang, Hongguo and Jančar, B. and Dojčinović, Biljana P. and Prijović, Željko and Antić, Bratislav",
year = "2019",
abstract = "In a new approach based on a two-step procedure, co-precipitation method followed by hydrothermal treatment in a microwave field, Zn-substituted Fe3O4 nanoparticles (ZnxFe3-xO4) were synthesized. Results of XRD, FT–IR and TEM analysis clearly demonstrate that nanoparticles were single phase, crystallizing in the spinel structure type (S.G. Fd3¯m) with crystallite size in the range of 2–20 nm, which strongly depends on Zn concentration. The produced nanoparticles were used for fabrication of modified carbon paste electrodes as a novel system for electrochemical non-enzymatic glucose detection. It was found that the increase of zinc concentration up to the value of x = 0.56 (Zn0.56Fe2.44O4) of as-prepared nanoparticles was followed with an increase of a performance of the modified carbon paste electrode toward glucose detection. Linear working range from 0.1 to 2 mM was obtained with detection limit of 0.03 mM, and with fast response time (<3 s). Proposed sensor was successfully applied for the determination of glucose level in real samples with satisfactory recovery. The synthesized zinc-ferrite samples were also tested as potential heating agents in magnetic hyperthermia. The heating ability (SAR value) increases with x value, reaching maximum for x = 0.37. This is correlated with changes of particle size and magnetic characteristics which strongly depend on Zn concentration. © 2018 Elsevier B.V.",
journal = "Journal of Alloys and Compounds",
title = "Bifunctional (Zn,Fe)3O4 nanoparticles: Tuning their efficiency for potential application in reagentless glucose biosensors and magnetic hyperthermia",
volume = "777",
pages = "454-462",
doi = "10.1016/j.jallcom.2018.10.369"
}

Ognjanović, M., Stanković, D., Ming, Y., Zhang, H., Jančar, B., Dojčinović, B. P., Prijović, Ž.,& Antić, B.. (2019). Bifunctional (Zn,Fe)3O4 nanoparticles: Tuning their efficiency for potential application in reagentless glucose biosensors and magnetic hyperthermia. in Journal of Alloys and Compounds, 777, 454-462.
https://doi.org/10.1016/j.jallcom.2018.10.369

Ognjanović M, Stanković D, Ming Y, Zhang H, Jančar B, Dojčinović BP, Prijović Ž, Antić B. Bifunctional (Zn,Fe)3O4 nanoparticles: Tuning their efficiency for potential application in reagentless glucose biosensors and magnetic hyperthermia. in Journal of Alloys and Compounds. 2019;777:454-462.
doi:10.1016/j.jallcom.2018.10.369 .

Ognjanović, Miloš, Stanković, Dalibor, Ming, Yue, Zhang, Hongguo, Jančar, B., Dojčinović, Biljana P., Prijović, Željko, Antić, Bratislav, "Bifunctional (Zn,Fe)3O4 nanoparticles: Tuning their efficiency for potential application in reagentless glucose biosensors and magnetic hyperthermia" in Journal of Alloys and Compounds, 777 (2019):454-462,
https://doi.org/10.1016/j.jallcom.2018.10.369 . .

TY  - JOUR
AU  - Ognjanović, Miloš
AU  - Stanković, Dalibor
AU  - Ming, Yue
AU  - Zhang, Hongguo
AU  - Jančar, B.
AU  - Dojčinović, Biljana P.
AU  - Prijović, Željko
AU  - Antić, Bratislav
PY  - 2019
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/2797
AB  - In a new approach based on a two-step procedure, co-precipitation method followed by hydrothermal treatment in a microwave field, Zn-substituted Fe3O4 nanoparticles (ZnxFe3-xO4) were synthesized. Results of XRD, FT–IR and TEM analysis clearly demonstrate that nanoparticles were single phase, crystallizing in the spinel structure type (S.G. Fd3¯m) with crystallite size in the range of 2–20 nm, which strongly depends on Zn concentration. The produced nanoparticles were used for fabrication of modified carbon paste electrodes as a novel system for electrochemical non-enzymatic glucose detection. It was found that the increase of zinc concentration up to the value of x = 0.56 (Zn0.56Fe2.44O4) of as-prepared nanoparticles was followed with an increase of a performance of the modified carbon paste electrode toward glucose detection. Linear working range from 0.1 to 2 mM was obtained with detection limit of 0.03 mM, and with fast response time (<3 s). Proposed sensor was successfully applied for the determination of glucose level in real samples with satisfactory recovery. The synthesized zinc-ferrite samples were also tested as potential heating agents in magnetic hyperthermia. The heating ability (SAR value) increases with x value, reaching maximum for x = 0.37. This is correlated with changes of particle size and magnetic characteristics which strongly depend on Zn concentration. © 2018 Elsevier B.V.
T2  - Journal of Alloys and Compounds
T1  - Bifunctional (Zn,Fe)3O4 nanoparticles: Tuning their efficiency for potential application in reagentless glucose biosensors and magnetic hyperthermia
VL  - 777
SP  - 454
EP  - 462
DO  - 10.1016/j.jallcom.2018.10.369
ER  - 

@article{
author = "Ognjanović, Miloš and Stanković, Dalibor and Ming, Yue and Zhang, Hongguo and Jančar, B. and Dojčinović, Biljana P. and Prijović, Željko and Antić, Bratislav",
year = "2019",
abstract = "In a new approach based on a two-step procedure, co-precipitation method followed by hydrothermal treatment in a microwave field, Zn-substituted Fe3O4 nanoparticles (ZnxFe3-xO4) were synthesized. Results of XRD, FT–IR and TEM analysis clearly demonstrate that nanoparticles were single phase, crystallizing in the spinel structure type (S.G. Fd3¯m) with crystallite size in the range of 2–20 nm, which strongly depends on Zn concentration. The produced nanoparticles were used for fabrication of modified carbon paste electrodes as a novel system for electrochemical non-enzymatic glucose detection. It was found that the increase of zinc concentration up to the value of x = 0.56 (Zn0.56Fe2.44O4) of as-prepared nanoparticles was followed with an increase of a performance of the modified carbon paste electrode toward glucose detection. Linear working range from 0.1 to 2 mM was obtained with detection limit of 0.03 mM, and with fast response time (<3 s). Proposed sensor was successfully applied for the determination of glucose level in real samples with satisfactory recovery. The synthesized zinc-ferrite samples were also tested as potential heating agents in magnetic hyperthermia. The heating ability (SAR value) increases with x value, reaching maximum for x = 0.37. This is correlated with changes of particle size and magnetic characteristics which strongly depend on Zn concentration. © 2018 Elsevier B.V.",
journal = "Journal of Alloys and Compounds",
title = "Bifunctional (Zn,Fe)3O4 nanoparticles: Tuning their efficiency for potential application in reagentless glucose biosensors and magnetic hyperthermia",
volume = "777",
pages = "454-462",
doi = "10.1016/j.jallcom.2018.10.369"
}

Ognjanović, M., Stanković, D., Ming, Y., Zhang, H., Jančar, B., Dojčinović, B. P., Prijović, Ž.,& Antić, B.. (2019). Bifunctional (Zn,Fe)3O4 nanoparticles: Tuning their efficiency for potential application in reagentless glucose biosensors and magnetic hyperthermia. in Journal of Alloys and Compounds, 777, 454-462.
https://doi.org/10.1016/j.jallcom.2018.10.369

Ognjanović M, Stanković D, Ming Y, Zhang H, Jančar B, Dojčinović BP, Prijović Ž, Antić B. Bifunctional (Zn,Fe)3O4 nanoparticles: Tuning their efficiency for potential application in reagentless glucose biosensors and magnetic hyperthermia. in Journal of Alloys and Compounds. 2019;777:454-462.
doi:10.1016/j.jallcom.2018.10.369 .

Ognjanović, Miloš, Stanković, Dalibor, Ming, Yue, Zhang, Hongguo, Jančar, B., Dojčinović, Biljana P., Prijović, Željko, Antić, Bratislav, "Bifunctional (Zn,Fe)3O4 nanoparticles: Tuning their efficiency for potential application in reagentless glucose biosensors and magnetic hyperthermia" in Journal of Alloys and Compounds, 777 (2019):454-462,
https://doi.org/10.1016/j.jallcom.2018.10.369 . .

TY  - JOUR
AU  - Stanković, Dalibor
AU  - Ognjanović, Miloš
AU  - Jović, Milica
AU  - Cuplić, Valentina
AU  - Lesch, Andreas
AU  - Girault, Hubert H.
AU  - Gavrović-Jankulović, Marija
AU  - Antić, Bratislav
PY  - 2019
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/3718
AB  - A disposable acetaminophen biosensor based on inkjet-printed CNT electrodes (IJPCNT) modified with amidase/cerium dioxide@graphene nanoribbons composite was developed (ACeO2@GNR/IJPCNT). The enzyme amidase A was used for the first time as a recognition element. Inkjet-printed CNT electrodes served as a basis for the construction of a biosensor that enables droplet detection using 5 μL sample volume. The biosensor showed high selectivity, sensitivity, a low detection limit of 0.18 μM and a wide working linear range from 1 to 100 μM. The proposed approach allows fast and reliable detection of acetaminophen in biological fluids with negligible matrix effect and remarkable reproducibility.
PB  - Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
T2  - Electroanalysis
T1  - Disposable Biosensor Based on Amidase/CeO2/GNR Modified Inkjet-printed CNT Electrodes-droplet Based Paracetamol Detection in Biological Fluids for “Point-of-care” Applications
VL  - 31
IS  - 8
SP  - 1534
EP  - 1542
DO  - 10.1002/elan.201900129
ER  - 

@article{
author = "Stanković, Dalibor and Ognjanović, Miloš and Jović, Milica and Cuplić, Valentina and Lesch, Andreas and Girault, Hubert H. and Gavrović-Jankulović, Marija and Antić, Bratislav",
year = "2019",
abstract = "A disposable acetaminophen biosensor based on inkjet-printed CNT electrodes (IJPCNT) modified with amidase/cerium dioxide@graphene nanoribbons composite was developed (ACeO2@GNR/IJPCNT). The enzyme amidase A was used for the first time as a recognition element. Inkjet-printed CNT electrodes served as a basis for the construction of a biosensor that enables droplet detection using 5 μL sample volume. The biosensor showed high selectivity, sensitivity, a low detection limit of 0.18 μM and a wide working linear range from 1 to 100 μM. The proposed approach allows fast and reliable detection of acetaminophen in biological fluids with negligible matrix effect and remarkable reproducibility.",
publisher = "Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim",
journal = "Electroanalysis",
title = "Disposable Biosensor Based on Amidase/CeO2/GNR Modified Inkjet-printed CNT Electrodes-droplet Based Paracetamol Detection in Biological Fluids for “Point-of-care” Applications",
volume = "31",
number = "8",
pages = "1534-1542",
doi = "10.1002/elan.201900129"
}

Stanković, D., Ognjanović, M., Jović, M., Cuplić, V., Lesch, A., Girault, H. H., Gavrović-Jankulović, M.,& Antić, B.. (2019). Disposable Biosensor Based on Amidase/CeO2/GNR Modified Inkjet-printed CNT Electrodes-droplet Based Paracetamol Detection in Biological Fluids for “Point-of-care” Applications. in Electroanalysis
Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim., 31(8), 1534-1542.
https://doi.org/10.1002/elan.201900129

Stanković D, Ognjanović M, Jović M, Cuplić V, Lesch A, Girault HH, Gavrović-Jankulović M, Antić B. Disposable Biosensor Based on Amidase/CeO2/GNR Modified Inkjet-printed CNT Electrodes-droplet Based Paracetamol Detection in Biological Fluids for “Point-of-care” Applications. in Electroanalysis. 2019;31(8):1534-1542.
doi:10.1002/elan.201900129 .

Stanković, Dalibor, Ognjanović, Miloš, Jović, Milica, Cuplić, Valentina, Lesch, Andreas, Girault, Hubert H., Gavrović-Jankulović, Marija, Antić, Bratislav, "Disposable Biosensor Based on Amidase/CeO2/GNR Modified Inkjet-printed CNT Electrodes-droplet Based Paracetamol Detection in Biological Fluids for “Point-of-care” Applications" in Electroanalysis, 31, no. 8 (2019):1534-1542,
https://doi.org/10.1002/elan.201900129 . .

TY  - JOUR
AU  - Ognjanović, Miloš
AU  - Dojčinović, Biljana P.
AU  - Fabian, Martin
AU  - Stanković, Dalibor
AU  - Mariano, Jose F. M. L.
AU  - Antić, Bratislav
PY  - 2018
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/3236
AB  - Microstructure and magnetic properties of nanoparticles can be tailored by optimising the synthesis procedure and changing chemical composition. In this study, a two-step procedure, i.e., coprecipitation in the presence of PEG 300 followed by microwave assisted (MW) hydrothermal synthesis, was introduced to obtain Co(x)Pe(3-x)O(4) (x = 0, 0.1 and 0.2) nanoparticles. It was found that with the increase of Co content, particle/crystallite size increased, with significant change of coercivity (H-c). The mixed samples of CoxFe3O4 (x = 0.1 and 0.2) were magnetically harder in comparison with Fe3O4. The H-c of Fe3O4 was 91 Oe, while for Co0.10Fe2.90O4 and Co(0.20)Ee(2.80) O-4, H, was 256 Oe and 1070 Oe, respectively. Saturation magnetisation (M s ) of mixed samples also increased up to 6% compared to Fe3O4. A special effort was devoted to study the effects of introducing different surfactants (PEG 300, PEG 4000 or SDS) during the synthesis procedure in order to improve morphological and microstructural properties of CoFe3O4 nanoparticles. The influence of surfactants on physical/chemical properties of nanoparticles is discussed.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Microwave assisted hydrothermal synthesis of (Fe,Co)(3)O-4 nanoparticles in the presence of surfactants and effects of Co/Fe ratio on microstructure and magnetism
VL  - 44
IS  - 12
SP  - 13967
EP  - 13972
DO  - 10.1016/j.ceramint.2018.04.246
ER  - 

@article{
author = "Ognjanović, Miloš and Dojčinović, Biljana P. and Fabian, Martin and Stanković, Dalibor and Mariano, Jose F. M. L. and Antić, Bratislav",
year = "2018",
abstract = "Microstructure and magnetic properties of nanoparticles can be tailored by optimising the synthesis procedure and changing chemical composition. In this study, a two-step procedure, i.e., coprecipitation in the presence of PEG 300 followed by microwave assisted (MW) hydrothermal synthesis, was introduced to obtain Co(x)Pe(3-x)O(4) (x = 0, 0.1 and 0.2) nanoparticles. It was found that with the increase of Co content, particle/crystallite size increased, with significant change of coercivity (H-c). The mixed samples of CoxFe3O4 (x = 0.1 and 0.2) were magnetically harder in comparison with Fe3O4. The H-c of Fe3O4 was 91 Oe, while for Co0.10Fe2.90O4 and Co(0.20)Ee(2.80) O-4, H, was 256 Oe and 1070 Oe, respectively. Saturation magnetisation (M s ) of mixed samples also increased up to 6% compared to Fe3O4. A special effort was devoted to study the effects of introducing different surfactants (PEG 300, PEG 4000 or SDS) during the synthesis procedure in order to improve morphological and microstructural properties of CoFe3O4 nanoparticles. The influence of surfactants on physical/chemical properties of nanoparticles is discussed.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Microwave assisted hydrothermal synthesis of (Fe,Co)(3)O-4 nanoparticles in the presence of surfactants and effects of Co/Fe ratio on microstructure and magnetism",
volume = "44",
number = "12",
pages = "13967-13972",
doi = "10.1016/j.ceramint.2018.04.246"
}

Ognjanović, M., Dojčinović, B. P., Fabian, M., Stanković, D., Mariano, J. F. M. L.,& Antić, B.. (2018). Microwave assisted hydrothermal synthesis of (Fe,Co)(3)O-4 nanoparticles in the presence of surfactants and effects of Co/Fe ratio on microstructure and magnetism. in Ceramics International
Elsevier Sci Ltd, Oxford., 44(12), 13967-13972.
https://doi.org/10.1016/j.ceramint.2018.04.246

Ognjanović M, Dojčinović BP, Fabian M, Stanković D, Mariano JFML, Antić B. Microwave assisted hydrothermal synthesis of (Fe,Co)(3)O-4 nanoparticles in the presence of surfactants and effects of Co/Fe ratio on microstructure and magnetism. in Ceramics International. 2018;44(12):13967-13972.
doi:10.1016/j.ceramint.2018.04.246 .

Ognjanović, Miloš, Dojčinović, Biljana P., Fabian, Martin, Stanković, Dalibor, Mariano, Jose F. M. L., Antić, Bratislav, "Microwave assisted hydrothermal synthesis of (Fe,Co)(3)O-4 nanoparticles in the presence of surfactants and effects of Co/Fe ratio on microstructure and magnetism" in Ceramics International, 44, no. 12 (2018):13967-13972,
https://doi.org/10.1016/j.ceramint.2018.04.246 . .

TY  - DATA
AU  - Ognjanović, Miloš
AU  - Dojčinović, Biljana P.
AU  - Fabian, Martin
AU  - Stanković, Dalibor
AU  - Mariano, Jose F. M. L.
AU  - Antić, Bratislav
PY  - 2018
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/3237
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Supplementary material for the article: Ognjanović, M.; Dojčinović, B.; Fabián, M.; Stanković, D. M.; Mariano, J. F. M. L.; Antić, B. Microwave Assisted Hydrothermal Synthesis of (Fe,Co)3O4 Nanoparticles in the Presence of Surfactants and Effects of Co/Fe Ratio on Microstructure and Magnetism. Ceramics 
International 2018, 44 (12), 13967–13972. https://doi.org/10.1016/j.ceramint.2018.04.246
UR  - https://hdl.handle.net/21.15107/rcub_cherry_3237
ER  - 

@misc{
author = "Ognjanović, Miloš and Dojčinović, Biljana P. and Fabian, Martin and Stanković, Dalibor and Mariano, Jose F. M. L. and Antić, Bratislav",
year = "2018",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Supplementary material for the article: Ognjanović, M.; Dojčinović, B.; Fabián, M.; Stanković, D. M.; Mariano, J. F. M. L.; Antić, B. Microwave Assisted Hydrothermal Synthesis of (Fe,Co)3O4 Nanoparticles in the Presence of Surfactants and Effects of Co/Fe Ratio on Microstructure and Magnetism. Ceramics 
International 2018, 44 (12), 13967–13972. https://doi.org/10.1016/j.ceramint.2018.04.246",
url = "https://hdl.handle.net/21.15107/rcub_cherry_3237"
}

Ognjanović, M., Dojčinović, B. P., Fabian, M., Stanković, D., Mariano, J. F. M. L.,& Antić, B.. (2018). Supplementary material for the article: Ognjanović, M.; Dojčinović, B.; Fabián, M.; Stanković, D. M.; Mariano, J. F. M. L.; Antić, B. Microwave Assisted Hydrothermal Synthesis of (Fe,Co)3O4 Nanoparticles in the Presence of Surfactants and Effects of Co/Fe Ratio on Microstructure and Magnetism. Ceramics 
International 2018, 44 (12), 13967–13972. https://doi.org/10.1016/j.ceramint.2018.04.246. in Ceramics International
Elsevier Sci Ltd, Oxford..
https://hdl.handle.net/21.15107/rcub_cherry_3237

Ognjanović M, Dojčinović BP, Fabian M, Stanković D, Mariano JFML, Antić B. Supplementary material for the article: Ognjanović, M.; Dojčinović, B.; Fabián, M.; Stanković, D. M.; Mariano, J. F. M. L.; Antić, B. Microwave Assisted Hydrothermal Synthesis of (Fe,Co)3O4 Nanoparticles in the Presence of Surfactants and Effects of Co/Fe Ratio on Microstructure and Magnetism. Ceramics 
International 2018, 44 (12), 13967–13972. https://doi.org/10.1016/j.ceramint.2018.04.246. in Ceramics International. 2018;.
https://hdl.handle.net/21.15107/rcub_cherry_3237 .

Ognjanović, Miloš, Dojčinović, Biljana P., Fabian, Martin, Stanković, Dalibor, Mariano, Jose F. M. L., Antić, Bratislav, "Supplementary material for the article: Ognjanović, M.; Dojčinović, B.; Fabián, M.; Stanković, D. M.; Mariano, J. F. M. L.; Antić, B. Microwave Assisted Hydrothermal Synthesis of (Fe,Co)3O4 Nanoparticles in the Presence of Surfactants and Effects of Co/Fe Ratio on Microstructure and Magnetism. Ceramics 
International 2018, 44 (12), 13967–13972. https://doi.org/10.1016/j.ceramint.2018.04.246" in Ceramics International (2018),
https://hdl.handle.net/21.15107/rcub_cherry_3237 .

TY  - JOUR
AU  - Ognjanović, Miloš
AU  - Dojčinović, Biljana P.
AU  - Fabian, Martin
AU  - Stanković, Dalibor
AU  - Mariano, Jose F. M. L.
AU  - Antić, Bratislav
PY  - 2018
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/2170
AB  - Microstructure and magnetic properties of nanoparticles can be tailored by optimising the synthesis procedure and changing chemical composition. In this study, a two-step procedure, i.e., coprecipitation in the presence of PEG 300 followed by microwave assisted (MW) hydrothermal synthesis, was introduced to obtain Co(x)Pe(3-x)O(4) (x = 0, 0.1 and 0.2) nanoparticles. It was found that with the increase of Co content, particle/crystallite size increased, with significant change of coercivity (H-c). The mixed samples of CoxFe3O4 (x = 0.1 and 0.2) were magnetically harder in comparison with Fe3O4. The H-c of Fe3O4 was 91 Oe, while for Co0.10Fe2.90O4 and Co(0.20)Ee(2.80) O-4, H, was 256 Oe and 1070 Oe, respectively. Saturation magnetisation (M s ) of mixed samples also increased up to 6% compared to Fe3O4. A special effort was devoted to study the effects of introducing different surfactants (PEG 300, PEG 4000 or SDS) during the synthesis procedure in order to improve morphological and microstructural properties of CoFe3O4 nanoparticles. The influence of surfactants on physical/chemical properties of nanoparticles is discussed.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Microwave assisted hydrothermal synthesis of (Fe,Co)(3)O-4 nanoparticles in the presence of surfactants and effects of Co/Fe ratio on microstructure and magnetism
VL  - 44
IS  - 12
SP  - 13967
EP  - 13972
DO  - 10.1016/j.ceramint.2018.04.246
ER  - 

@article{
author = "Ognjanović, Miloš and Dojčinović, Biljana P. and Fabian, Martin and Stanković, Dalibor and Mariano, Jose F. M. L. and Antić, Bratislav",
year = "2018",
abstract = "Microstructure and magnetic properties of nanoparticles can be tailored by optimising the synthesis procedure and changing chemical composition. In this study, a two-step procedure, i.e., coprecipitation in the presence of PEG 300 followed by microwave assisted (MW) hydrothermal synthesis, was introduced to obtain Co(x)Pe(3-x)O(4) (x = 0, 0.1 and 0.2) nanoparticles. It was found that with the increase of Co content, particle/crystallite size increased, with significant change of coercivity (H-c). The mixed samples of CoxFe3O4 (x = 0.1 and 0.2) were magnetically harder in comparison with Fe3O4. The H-c of Fe3O4 was 91 Oe, while for Co0.10Fe2.90O4 and Co(0.20)Ee(2.80) O-4, H, was 256 Oe and 1070 Oe, respectively. Saturation magnetisation (M s ) of mixed samples also increased up to 6% compared to Fe3O4. A special effort was devoted to study the effects of introducing different surfactants (PEG 300, PEG 4000 or SDS) during the synthesis procedure in order to improve morphological and microstructural properties of CoFe3O4 nanoparticles. The influence of surfactants on physical/chemical properties of nanoparticles is discussed.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Microwave assisted hydrothermal synthesis of (Fe,Co)(3)O-4 nanoparticles in the presence of surfactants and effects of Co/Fe ratio on microstructure and magnetism",
volume = "44",
number = "12",
pages = "13967-13972",
doi = "10.1016/j.ceramint.2018.04.246"
}

Ognjanović, M., Dojčinović, B. P., Fabian, M., Stanković, D., Mariano, J. F. M. L.,& Antić, B.. (2018). Microwave assisted hydrothermal synthesis of (Fe,Co)(3)O-4 nanoparticles in the presence of surfactants and effects of Co/Fe ratio on microstructure and magnetism. in Ceramics International
Elsevier Sci Ltd, Oxford., 44(12), 13967-13972.
https://doi.org/10.1016/j.ceramint.2018.04.246

Ognjanović M, Dojčinović BP, Fabian M, Stanković D, Mariano JFML, Antić B. Microwave assisted hydrothermal synthesis of (Fe,Co)(3)O-4 nanoparticles in the presence of surfactants and effects of Co/Fe ratio on microstructure and magnetism. in Ceramics International. 2018;44(12):13967-13972.
doi:10.1016/j.ceramint.2018.04.246 .

Ognjanović, Miloš, Dojčinović, Biljana P., Fabian, Martin, Stanković, Dalibor, Mariano, Jose F. M. L., Antić, Bratislav, "Microwave assisted hydrothermal synthesis of (Fe,Co)(3)O-4 nanoparticles in the presence of surfactants and effects of Co/Fe ratio on microstructure and magnetism" in Ceramics International, 44, no. 12 (2018):13967-13972,
https://doi.org/10.1016/j.ceramint.2018.04.246 . .

TY  - DATA
AU  - Ognjanović, Miloš
AU  - Stanković, Dalibor
AU  - Fabián, Martin
AU  - Vukadinović, Aleksandar
AU  - Prijović, Željko
AU  - Dojčinović, Biljana P.
AU  - Antić, Bratislav
PY  - 2018
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/3150
T2  - Electroanalysis
T1  - Supplementary material for the article: Ognjanović, M.; Stanković, D. M.; Fabián, M.; Vukadinović, A.; Prijović, Ž.; Dojčinović, B.;  Antić, B. A Voltammetric Sensor Based on MgFe2O4 Decorated on Reduced Graphene  Oxide-Modified Electrode for Sensitive and Simultaneous Determination of Catechol and  Hydroquinone. Electroanalysis 2018, 30 (11), 2620–2627.  https://doi.org/10.1002/elan.201800357
UR  - https://hdl.handle.net/21.15107/rcub_cherry_3150
ER  - 

@misc{
author = "Ognjanović, Miloš and Stanković, Dalibor and Fabián, Martin and Vukadinović, Aleksandar and Prijović, Željko and Dojčinović, Biljana P. and Antić, Bratislav",
year = "2018",
journal = "Electroanalysis",
title = "Supplementary material for the article: Ognjanović, M.; Stanković, D. M.; Fabián, M.; Vukadinović, A.; Prijović, Ž.; Dojčinović, B.;  Antić, B. A Voltammetric Sensor Based on MgFe2O4 Decorated on Reduced Graphene  Oxide-Modified Electrode for Sensitive and Simultaneous Determination of Catechol and  Hydroquinone. Electroanalysis 2018, 30 (11), 2620–2627.  https://doi.org/10.1002/elan.201800357",
url = "https://hdl.handle.net/21.15107/rcub_cherry_3150"
}

Ognjanović, M., Stanković, D., Fabián, M., Vukadinović, A., Prijović, Ž., Dojčinović, B. P.,& Antić, B.. (2018). Supplementary material for the article: Ognjanović, M.; Stanković, D. M.; Fabián, M.; Vukadinović, A.; Prijović, Ž.; Dojčinović, B.;  Antić, B. A Voltammetric Sensor Based on MgFe2O4 Decorated on Reduced Graphene  Oxide-Modified Electrode for Sensitive and Simultaneous Determination of Catechol and  Hydroquinone. Electroanalysis 2018, 30 (11), 2620–2627.  https://doi.org/10.1002/elan.201800357. in Electroanalysis.
https://hdl.handle.net/21.15107/rcub_cherry_3150

Ognjanović M, Stanković D, Fabián M, Vukadinović A, Prijović Ž, Dojčinović BP, Antić B. Supplementary material for the article: Ognjanović, M.; Stanković, D. M.; Fabián, M.; Vukadinović, A.; Prijović, Ž.; Dojčinović, B.;  Antić, B. A Voltammetric Sensor Based on MgFe2O4 Decorated on Reduced Graphene  Oxide-Modified Electrode for Sensitive and Simultaneous Determination of Catechol and  Hydroquinone. Electroanalysis 2018, 30 (11), 2620–2627.  https://doi.org/10.1002/elan.201800357. in Electroanalysis. 2018;.
https://hdl.handle.net/21.15107/rcub_cherry_3150 .

Ognjanović, Miloš, Stanković, Dalibor, Fabián, Martin, Vukadinović, Aleksandar, Prijović, Željko, Dojčinović, Biljana P., Antić, Bratislav, "Supplementary material for the article: Ognjanović, M.; Stanković, D. M.; Fabián, M.; Vukadinović, A.; Prijović, Ž.; Dojčinović, B.;  Antić, B. A Voltammetric Sensor Based on MgFe2O4 Decorated on Reduced Graphene  Oxide-Modified Electrode for Sensitive and Simultaneous Determination of Catechol and  Hydroquinone. Electroanalysis 2018, 30 (11), 2620–2627.  https://doi.org/10.1002/elan.201800357" in Electroanalysis (2018),
https://hdl.handle.net/21.15107/rcub_cherry_3150 .