TY  - JOUR
AU  - Đurđić, Slađana Z.
AU  - Vlahović, Filip
AU  - Markićević, Milan
AU  - Mutić, Jelena
AU  - Manojlović, Dragan D.
AU  - Stanković, Vesna
AU  - Švorc, Ľubomír
AU  - Stanković, Dalibor
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5812
AB  - Herein, a screen–printed diamond electrode (SPDE) coupled with a “point-of-care” platform (30 µL-drop concepts, single-drop-detection approach) was successfully applied for the electrochemical determination of pterostilbene (PTS). Cyclic voltammetry identified irreversible oxidation of PTS, where oxidation peak was shown to be strongly dependent on the pH of the working environmental. Although the proposition of the detailed electrochemical oxidation mechanism of PTS goes out of the scope of the present research, we have determined the most probable reactive site of our analyte, by utilizing DFT-based reactivity descriptors (Fukui functions). For electrochemical quantification of PTS, oxidation peak at 0.32 V (vs. Ag/AgCl) was followed in presence of 0.5 mol L−1 of Briton–Robinson buffer solution (pH = 9). Coupled with the optimized parameters of differential pulse voltammetry (DPV), SPDE detected PTS in two linear ranges (first range was from 0.011 to 0.912 µmol L−1; second range was from 0.912 to 4.420 µmol L−1), providing the LOD and LOQ on a nanomolar level (3.1 nmol L−1 and 10.0 nmol L−1, respectively). The selectivity of the optimized DPV method was found to be excellent, with the current changes of less than 7%, in the presence of ten times higher concentrations of the certain interferences. The practical applicability of the SPDE and single-drop-detection approach in dietary supplements (with a declared PTS content of 50 mg/tablet), with the recovery values ranging from 95 to 102%, shows that the developed method has high potential for precise and accurate PTS detection, as well as exceptional miniaturization possibilities of relevant equipment for on-site sensing.
PB  - MDPI
T2  - Chemosensors
T1  - Application of Screen Printed Diamond Electrode, Coupled with “Point-of-Care” Platform, for Nanomolar Quantification of Phytonutrient Pterostilbene in Dietary Supplements: An Experimental Study Supported by Theory
VL  - 11
IS  - 1
SP  - 15
DO  - 10.3390/chemosensors11010015
ER  - 

@article{
author = "Đurđić, Slađana Z. and Vlahović, Filip and Markićević, Milan and Mutić, Jelena and Manojlović, Dragan D. and Stanković, Vesna and Švorc, Ľubomír and Stanković, Dalibor",
year = "2023",
abstract = "Herein, a screen–printed diamond electrode (SPDE) coupled with a “point-of-care” platform (30 µL-drop concepts, single-drop-detection approach) was successfully applied for the electrochemical determination of pterostilbene (PTS). Cyclic voltammetry identified irreversible oxidation of PTS, where oxidation peak was shown to be strongly dependent on the pH of the working environmental. Although the proposition of the detailed electrochemical oxidation mechanism of PTS goes out of the scope of the present research, we have determined the most probable reactive site of our analyte, by utilizing DFT-based reactivity descriptors (Fukui functions). For electrochemical quantification of PTS, oxidation peak at 0.32 V (vs. Ag/AgCl) was followed in presence of 0.5 mol L−1 of Briton–Robinson buffer solution (pH = 9). Coupled with the optimized parameters of differential pulse voltammetry (DPV), SPDE detected PTS in two linear ranges (first range was from 0.011 to 0.912 µmol L−1; second range was from 0.912 to 4.420 µmol L−1), providing the LOD and LOQ on a nanomolar level (3.1 nmol L−1 and 10.0 nmol L−1, respectively). The selectivity of the optimized DPV method was found to be excellent, with the current changes of less than 7%, in the presence of ten times higher concentrations of the certain interferences. The practical applicability of the SPDE and single-drop-detection approach in dietary supplements (with a declared PTS content of 50 mg/tablet), with the recovery values ranging from 95 to 102%, shows that the developed method has high potential for precise and accurate PTS detection, as well as exceptional miniaturization possibilities of relevant equipment for on-site sensing.",
publisher = "MDPI",
journal = "Chemosensors",
title = "Application of Screen Printed Diamond Electrode, Coupled with “Point-of-Care” Platform, for Nanomolar Quantification of Phytonutrient Pterostilbene in Dietary Supplements: An Experimental Study Supported by Theory",
volume = "11",
number = "1",
pages = "15",
doi = "10.3390/chemosensors11010015"
}

Đurđić, S. Z., Vlahović, F., Markićević, M., Mutić, J., Manojlović, D. D., Stanković, V., Švorc, Ľ.,& Stanković, D.. (2023). Application of Screen Printed Diamond Electrode, Coupled with “Point-of-Care” Platform, for Nanomolar Quantification of Phytonutrient Pterostilbene in Dietary Supplements: An Experimental Study Supported by Theory. in Chemosensors
MDPI., 11(1), 15.
https://doi.org/10.3390/chemosensors11010015

Đurđić SZ, Vlahović F, Markićević M, Mutić J, Manojlović DD, Stanković V, Švorc Ľ, Stanković D. Application of Screen Printed Diamond Electrode, Coupled with “Point-of-Care” Platform, for Nanomolar Quantification of Phytonutrient Pterostilbene in Dietary Supplements: An Experimental Study Supported by Theory. in Chemosensors. 2023;11(1):15.
doi:10.3390/chemosensors11010015 .

Đurđić, Slađana Z., Vlahović, Filip, Markićević, Milan, Mutić, Jelena, Manojlović, Dragan D., Stanković, Vesna, Švorc, Ľubomír, Stanković, Dalibor, "Application of Screen Printed Diamond Electrode, Coupled with “Point-of-Care” Platform, for Nanomolar Quantification of Phytonutrient Pterostilbene in Dietary Supplements: An Experimental Study Supported by Theory" in Chemosensors, 11, no. 1 (2023):15,
https://doi.org/10.3390/chemosensors11010015 . .

TY  - DATA
AU  - Đurđić, Slađana Z.
AU  - Vlahović, Filip
AU  - Markićević, Milan
AU  - Mutić, Jelena
AU  - Manojlović, Dragan D.
AU  - Stanković, Vesna
AU  - Švorc, Ľubomír
AU  - Stanković, Dalibor
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5812
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5839
AB  - Herein, a screen–printed diamond electrode (SPDE) coupled with a “point-of-care” platform (30 µL-drop concepts, single-drop-detection approach) was successfully applied for the electrochemical determination of pterostilbene (PTS). Cyclic voltammetry identified irreversible oxidation of PTS, where oxidation peak was shown to be strongly dependent on the pH of the working environmental. Although the proposition of the detailed electrochemical oxidation mechanism of PTS goes out of the scope of the present research, we have determined the most probable reactive site of our analyte, by utilizing DFT-based reactivity descriptors (Fukui functions). For electrochemical quantification of PTS, oxidation peak at 0.32 V (vs. Ag/AgCl) was followed in presence of 0.5 mol L−1 of Briton–Robinson buffer solution (pH = 9). Coupled with the optimized parameters of differential pulse voltammetry (DPV), SPDE detected PTS in two linear ranges (first range was from 0.011 to 0.912 µmol L−1; second range was from 0.912 to 4.420 µmol L−1), providing the LOD and LOQ on a nanomolar level (3.1 nmol L−1 and 10.0 nmol L−1, respectively). The selectivity of the optimized DPV method was found to be excellent, with the current changes of less than 7%, in the presence of ten times higher concentrations of the certain interferences. The practical applicability of the SPDE and single-drop-detection approach in dietary supplements (with a declared PTS content of 50 mg/tablet), with the recovery values ranging from 95 to 102%, shows that the developed method has high potential for precise and accurate PTS detection, as well as exceptional miniaturization possibilities of relevant equipment for on-site sensing.
PB  - MDPI
T2  - Chemosensors
T1  - Supplementary material for: Đurđić, S., Vlahović, F., Markićević, M., Mutić, J., Manojlović, D., Stanković, V., Švorc, Ľ.,& Stanković, D.. (2023). Application of Screen Printed Diamond Electrode, Coupled with “Point-of-Care” Platform, for Nanomolar Quantification of Phytonutrient Pterostilbene in Dietary Supplements: An Experimental Study Supported by Theory. in Chemosensors MDPI., 11(1), 15. https://doi.org/10.3390/chemosensors11010015
VL  - 11
IS  - 1
SP  - 15
UR  - https://hdl.handle.net/21.15107/rcub_cherry_5839
ER  - 

@misc{
author = "Đurđić, Slađana Z. and Vlahović, Filip and Markićević, Milan and Mutić, Jelena and Manojlović, Dragan D. and Stanković, Vesna and Švorc, Ľubomír and Stanković, Dalibor",
year = "2023",
abstract = "Herein, a screen–printed diamond electrode (SPDE) coupled with a “point-of-care” platform (30 µL-drop concepts, single-drop-detection approach) was successfully applied for the electrochemical determination of pterostilbene (PTS). Cyclic voltammetry identified irreversible oxidation of PTS, where oxidation peak was shown to be strongly dependent on the pH of the working environmental. Although the proposition of the detailed electrochemical oxidation mechanism of PTS goes out of the scope of the present research, we have determined the most probable reactive site of our analyte, by utilizing DFT-based reactivity descriptors (Fukui functions). For electrochemical quantification of PTS, oxidation peak at 0.32 V (vs. Ag/AgCl) was followed in presence of 0.5 mol L−1 of Briton–Robinson buffer solution (pH = 9). Coupled with the optimized parameters of differential pulse voltammetry (DPV), SPDE detected PTS in two linear ranges (first range was from 0.011 to 0.912 µmol L−1; second range was from 0.912 to 4.420 µmol L−1), providing the LOD and LOQ on a nanomolar level (3.1 nmol L−1 and 10.0 nmol L−1, respectively). The selectivity of the optimized DPV method was found to be excellent, with the current changes of less than 7%, in the presence of ten times higher concentrations of the certain interferences. The practical applicability of the SPDE and single-drop-detection approach in dietary supplements (with a declared PTS content of 50 mg/tablet), with the recovery values ranging from 95 to 102%, shows that the developed method has high potential for precise and accurate PTS detection, as well as exceptional miniaturization possibilities of relevant equipment for on-site sensing.",
publisher = "MDPI",
journal = "Chemosensors",
title = "Supplementary material for: Đurđić, S., Vlahović, F., Markićević, M., Mutić, J., Manojlović, D., Stanković, V., Švorc, Ľ.,& Stanković, D.. (2023). Application of Screen Printed Diamond Electrode, Coupled with “Point-of-Care” Platform, for Nanomolar Quantification of Phytonutrient Pterostilbene in Dietary Supplements: An Experimental Study Supported by Theory. in Chemosensors MDPI., 11(1), 15. https://doi.org/10.3390/chemosensors11010015",
volume = "11",
number = "1",
pages = "15",
url = "https://hdl.handle.net/21.15107/rcub_cherry_5839"
}

Đurđić, S. Z., Vlahović, F., Markićević, M., Mutić, J., Manojlović, D. D., Stanković, V., Švorc, Ľ.,& Stanković, D.. (2023). Supplementary material for: Đurđić, S., Vlahović, F., Markićević, M., Mutić, J., Manojlović, D., Stanković, V., Švorc, Ľ.,& Stanković, D.. (2023). Application of Screen Printed Diamond Electrode, Coupled with “Point-of-Care” Platform, for Nanomolar Quantification of Phytonutrient Pterostilbene in Dietary Supplements: An Experimental Study Supported by Theory. in Chemosensors MDPI., 11(1), 15. https://doi.org/10.3390/chemosensors11010015. in Chemosensors
MDPI., 11(1), 15.
https://hdl.handle.net/21.15107/rcub_cherry_5839

Đurđić SZ, Vlahović F, Markićević M, Mutić J, Manojlović DD, Stanković V, Švorc Ľ, Stanković D. Supplementary material for: Đurđić, S., Vlahović, F., Markićević, M., Mutić, J., Manojlović, D., Stanković, V., Švorc, Ľ.,& Stanković, D.. (2023). Application of Screen Printed Diamond Electrode, Coupled with “Point-of-Care” Platform, for Nanomolar Quantification of Phytonutrient Pterostilbene in Dietary Supplements: An Experimental Study Supported by Theory. in Chemosensors MDPI., 11(1), 15. https://doi.org/10.3390/chemosensors11010015. in Chemosensors. 2023;11(1):15.
https://hdl.handle.net/21.15107/rcub_cherry_5839 .

Đurđić, Slađana Z., Vlahović, Filip, Markićević, Milan, Mutić, Jelena, Manojlović, Dragan D., Stanković, Vesna, Švorc, Ľubomír, Stanković, Dalibor, "Supplementary material for: Đurđić, S., Vlahović, F., Markićević, M., Mutić, J., Manojlović, D., Stanković, V., Švorc, Ľ.,& Stanković, D.. (2023). Application of Screen Printed Diamond Electrode, Coupled with “Point-of-Care” Platform, for Nanomolar Quantification of Phytonutrient Pterostilbene in Dietary Supplements: An Experimental Study Supported by Theory. in Chemosensors MDPI., 11(1), 15. https://doi.org/10.3390/chemosensors11010015" in Chemosensors, 11, no. 1 (2023):15,
https://hdl.handle.net/21.15107/rcub_cherry_5839 .

TY  - JOUR
AU  - Pavličková, Michaela
AU  - Đurđić, Slađana Z.
AU  - Hatala, Michal
AU  - Stanković, Dalibor
AU  - Švorc, Ľubomír
AU  - Veteška, Peter
AU  - Gemeiner, Pavol
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6324
AB  - Pad printing is not a widely used printing technique, but it offers the possibility of a simple, fast, and low-cost production of various high-resolution electrode structures. Here, the pad-printed reduced graphene oxide (rGO) electrodes are prepared from pad-printable inks containing rGO powder and different concentrations of two cellulose-based polymers: ethylcellulose and cellulose acetate butyrate. The applicability of rGO inks for pad printing is analyzed according to their rheological parameters and printability. Based on viscosity, storage (G′) and loss modulus (G″) values, 10 wt% of ethylcellulose and 15 wt% of cellulose acetate butyrate appear to be most suitable for pad printing. The effect of polymer concentration on rGO electrodes homogeneity and mechanical stability is also evaluated. Cyclic voltammetry measurements for [Fe(CN)6]3−/4− redox system are performed with rGO/cellulose inks pad-printed onto transparent conductive oxide substrates with the best results when using ethylcellulose as a binder. Finally, the square-wave voltammetric method assesses the viability of rGO electrodes for the fast detection of ascorbic acid (detection limit of 15 μM) coupled with satisfactory precision (4.5%, n = 5) and long-term stability during electrochemical measurements.
PB  - Wiley
T2  - Journal of Applied Polymer Science
T1  - Pad printing inks based on reduced graphene oxide and various cellulose binders: Rheological properties, printability and application in electrochemical sensors
VL  - 140
IS  - 42
SP  - e54570
DO  - 10.1002/app.54570
ER  - 

@article{
author = "Pavličková, Michaela and Đurđić, Slađana Z. and Hatala, Michal and Stanković, Dalibor and Švorc, Ľubomír and Veteška, Peter and Gemeiner, Pavol",
year = "2023",
abstract = "Pad printing is not a widely used printing technique, but it offers the possibility of a simple, fast, and low-cost production of various high-resolution electrode structures. Here, the pad-printed reduced graphene oxide (rGO) electrodes are prepared from pad-printable inks containing rGO powder and different concentrations of two cellulose-based polymers: ethylcellulose and cellulose acetate butyrate. The applicability of rGO inks for pad printing is analyzed according to their rheological parameters and printability. Based on viscosity, storage (G′) and loss modulus (G″) values, 10 wt% of ethylcellulose and 15 wt% of cellulose acetate butyrate appear to be most suitable for pad printing. The effect of polymer concentration on rGO electrodes homogeneity and mechanical stability is also evaluated. Cyclic voltammetry measurements for [Fe(CN)6]3−/4− redox system are performed with rGO/cellulose inks pad-printed onto transparent conductive oxide substrates with the best results when using ethylcellulose as a binder. Finally, the square-wave voltammetric method assesses the viability of rGO electrodes for the fast detection of ascorbic acid (detection limit of 15 μM) coupled with satisfactory precision (4.5%, n = 5) and long-term stability during electrochemical measurements.",
publisher = "Wiley",
journal = "Journal of Applied Polymer Science",
title = "Pad printing inks based on reduced graphene oxide and various cellulose binders: Rheological properties, printability and application in electrochemical sensors",
volume = "140",
number = "42",
pages = "e54570",
doi = "10.1002/app.54570"
}

Pavličková, M., Đurđić, S. Z., Hatala, M., Stanković, D., Švorc, Ľ., Veteška, P.,& Gemeiner, P.. (2023). Pad printing inks based on reduced graphene oxide and various cellulose binders: Rheological properties, printability and application in electrochemical sensors. in Journal of Applied Polymer Science
Wiley., 140(42), e54570.
https://doi.org/10.1002/app.54570

Pavličková M, Đurđić SZ, Hatala M, Stanković D, Švorc Ľ, Veteška P, Gemeiner P. Pad printing inks based on reduced graphene oxide and various cellulose binders: Rheological properties, printability and application in electrochemical sensors. in Journal of Applied Polymer Science. 2023;140(42):e54570.
doi:10.1002/app.54570 .

Pavličková, Michaela, Đurđić, Slađana Z., Hatala, Michal, Stanković, Dalibor, Švorc, Ľubomír, Veteška, Peter, Gemeiner, Pavol, "Pad printing inks based on reduced graphene oxide and various cellulose binders: Rheological properties, printability and application in electrochemical sensors" in Journal of Applied Polymer Science, 140, no. 42 (2023):e54570,
https://doi.org/10.1002/app.54570 . .

TY  - JOUR
AU  - Haššo, Marek
AU  - Sarakhman, Olha
AU  - Đurđić, Slađana Z.
AU  - Stanković, Dalibor
AU  - Švorc, Ľubomír
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6263
AB  - In this work, an advanced electrochemical platform was developed for the simple, rapid and sensitive determination of the polyphenolic compound tannic acid in various beverages using the combination of batch injection analysis with amperometric detection on a screen-printed carbon electrode. Several experimental parameters (pH of supporting electrolyte, detection potential, dispensing rate, injected volume, stirring) were consistently evaluated. The most favorable analytical performance in terms of sensitivity, selectivity, repeatability and sampling frequency was obtained in Britton-Robinson buffer pH 5.0 at a detection potential of +0.6 V vs. Ag/AgCl, a dispensing rate of 204 µL/s and an injected volume of 80 µL under stirring condition (1500 r.p.m.). The presented platform has advantages for routine analysis including portable and small-scale experimental setup, low sample consumption (∼100 µL), simple sample preparation (dilution in supporting electrolyte), high sampling frequency (180 injections per hour), low limit of detection (80 nM) and suitable precision (RSD = 4.2% for 10 μM tannic acid, n = 20). The applicability of the method was verified by analyzing several beverage samples (tea, wine) in spike-recovery assay with the recovery values for tannic acid ranging from 94 to 101 %.
PB  - Elsevier
T2  - Journal of Electroanalytical Chemistry
T1  - Advanced electrochemical platform for simple and rapid quantification of tannic acid in beverages using batch injection analysis with amperometric detection
VL  - 942
SP  - 117578
DO  - 10.1016/j.jelechem.2023.117578
ER  - 

@article{
author = "Haššo, Marek and Sarakhman, Olha and Đurđić, Slađana Z. and Stanković, Dalibor and Švorc, Ľubomír",
year = "2023",
abstract = "In this work, an advanced electrochemical platform was developed for the simple, rapid and sensitive determination of the polyphenolic compound tannic acid in various beverages using the combination of batch injection analysis with amperometric detection on a screen-printed carbon electrode. Several experimental parameters (pH of supporting electrolyte, detection potential, dispensing rate, injected volume, stirring) were consistently evaluated. The most favorable analytical performance in terms of sensitivity, selectivity, repeatability and sampling frequency was obtained in Britton-Robinson buffer pH 5.0 at a detection potential of +0.6 V vs. Ag/AgCl, a dispensing rate of 204 µL/s and an injected volume of 80 µL under stirring condition (1500 r.p.m.). The presented platform has advantages for routine analysis including portable and small-scale experimental setup, low sample consumption (∼100 µL), simple sample preparation (dilution in supporting electrolyte), high sampling frequency (180 injections per hour), low limit of detection (80 nM) and suitable precision (RSD = 4.2% for 10 μM tannic acid, n = 20). The applicability of the method was verified by analyzing several beverage samples (tea, wine) in spike-recovery assay with the recovery values for tannic acid ranging from 94 to 101 %.",
publisher = "Elsevier",
journal = "Journal of Electroanalytical Chemistry",
title = "Advanced electrochemical platform for simple and rapid quantification of tannic acid in beverages using batch injection analysis with amperometric detection",
volume = "942",
pages = "117578",
doi = "10.1016/j.jelechem.2023.117578"
}

Haššo, M., Sarakhman, O., Đurđić, S. Z., Stanković, D.,& Švorc, Ľ.. (2023). Advanced electrochemical platform for simple and rapid quantification of tannic acid in beverages using batch injection analysis with amperometric detection. in Journal of Electroanalytical Chemistry
Elsevier., 942, 117578.
https://doi.org/10.1016/j.jelechem.2023.117578

Haššo M, Sarakhman O, Đurđić SZ, Stanković D, Švorc Ľ. Advanced electrochemical platform for simple and rapid quantification of tannic acid in beverages using batch injection analysis with amperometric detection. in Journal of Electroanalytical Chemistry. 2023;942:117578.
doi:10.1016/j.jelechem.2023.117578 .

Haššo, Marek, Sarakhman, Olha, Đurđić, Slađana Z., Stanković, Dalibor, Švorc, Ľubomír, "Advanced electrochemical platform for simple and rapid quantification of tannic acid in beverages using batch injection analysis with amperometric detection" in Journal of Electroanalytical Chemistry, 942 (2023):117578,
https://doi.org/10.1016/j.jelechem.2023.117578 . .