TY  - JOUR
AU  - Embirsh, Hifa Salah Adeen
AU  - Stajčić, Ivana
AU  - Gržetić, Jelena
AU  - Mladenović, Ivana O.
AU  - Anđelković, Boban D.
AU  - Marinković, Aleksandar
AU  - Vuksanović, Marija M.
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6370
AB  - This paper presents sustainable technology for environmentally friendly composite production. Biobased unsaturated polyester resin (b-UPR), synthesized from waste polyethylene terephthalate (PET) glycosylate and renewable origin maleic anhydride (MAnh) and propylene glycol (PG), was reinforced with unmodified and vinyl-modified biosilica nanoparticles obtained from rice husk. The structural and morphological properties of the obtained particles, b-UPR, as well as composites, were characterized by Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) techniques. The study of the influence of biosilica modification on the mechanical properties of composites was supported by hardness modeling. Improvement of the tensile strength of the b-UPR-based composite at 2.5 wt.% addition of biosilica modified with vinyl silane, named “b-UPR/SiO2-V” composite, has been achieved with 88% increase. The thermal aging process applied to the b-UPR/SiO2-V composite, which simulates use over the product’s lifetime, leads to the deterioration of composites that were used as fillers in commercial unsaturated polyester resin (c-UPR). The grinded artificially aged b-UPR composites were used as filler in c-UPR for the production of a table top layer with outstanding mechanical properties, i.e., impact resistance and microhardness, as well as fire resistance rated in the V-0 category according to the UL-94 test. Developing sustainable composites that are chemically synthesized from renewable sources is important from the aspect of preserving the environment and existing resources as well as the extending their life cycle.
PB  - MDPI
T2  - Polymers
T1  - Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles
VL  - 15
IS  - 18
SP  - 3756
DO  - 10.3390/polym15183756
ER  - 

@article{
author = "Embirsh, Hifa Salah Adeen and Stajčić, Ivana and Gržetić, Jelena and Mladenović, Ivana O. and Anđelković, Boban D. and Marinković, Aleksandar and Vuksanović, Marija M.",
year = "2023",
abstract = "This paper presents sustainable technology for environmentally friendly composite production. Biobased unsaturated polyester resin (b-UPR), synthesized from waste polyethylene terephthalate (PET) glycosylate and renewable origin maleic anhydride (MAnh) and propylene glycol (PG), was reinforced with unmodified and vinyl-modified biosilica nanoparticles obtained from rice husk. The structural and morphological properties of the obtained particles, b-UPR, as well as composites, were characterized by Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) techniques. The study of the influence of biosilica modification on the mechanical properties of composites was supported by hardness modeling. Improvement of the tensile strength of the b-UPR-based composite at 2.5 wt.% addition of biosilica modified with vinyl silane, named “b-UPR/SiO2-V” composite, has been achieved with 88% increase. The thermal aging process applied to the b-UPR/SiO2-V composite, which simulates use over the product’s lifetime, leads to the deterioration of composites that were used as fillers in commercial unsaturated polyester resin (c-UPR). The grinded artificially aged b-UPR composites were used as filler in c-UPR for the production of a table top layer with outstanding mechanical properties, i.e., impact resistance and microhardness, as well as fire resistance rated in the V-0 category according to the UL-94 test. Developing sustainable composites that are chemically synthesized from renewable sources is important from the aspect of preserving the environment and existing resources as well as the extending their life cycle.",
publisher = "MDPI",
journal = "Polymers",
title = "Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles",
volume = "15",
number = "18",
pages = "3756",
doi = "10.3390/polym15183756"
}

Embirsh, H. S. A., Stajčić, I., Gržetić, J., Mladenović, I. O., Anđelković, B. D., Marinković, A.,& Vuksanović, M. M.. (2023). Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles. in Polymers
MDPI., 15(18), 3756.
https://doi.org/10.3390/polym15183756

Embirsh HSA, Stajčić I, Gržetić J, Mladenović IO, Anđelković BD, Marinković A, Vuksanović MM. Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles. in Polymers. 2023;15(18):3756.
doi:10.3390/polym15183756 .

Embirsh, Hifa Salah Adeen, Stajčić, Ivana, Gržetić, Jelena, Mladenović, Ivana O., Anđelković, Boban D., Marinković, Aleksandar, Vuksanović, Marija M., "Synthesis, Characterization and Application of Biobased Unsaturated Polyester Resin Reinforced with Unmodified/Modified Biosilica Nanoparticles" in Polymers, 15, no. 18 (2023):3756,
https://doi.org/10.3390/polym15183756 . .

TY  - JOUR
AU  - Popović, D. Ž.
AU  - Ivanović, T. G.
AU  - Miladinović, J.
AU  - Miladinović, Z. P.
AU  - Pastor, F. T.
AU  - Zlatić, Aleksandra
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6416
AB  - The mean ionic activity coefficients of NaCl in a ternary system {yNaCl + (1 – y)Na2HPO4}(aq) were determined from measurements of the electromotive force (EMF) where the NaCl ionic strength fraction was y = (0.3012; 0.4015; 0.5011; 0.5988; 0.7706; 0.8997) in the range of total ionic strength of the solution Im = 0.0701–1.0161 mol kg–1 at temperature T = 298.15 K. A cell of the Na–ISE|$${\text{NaCl}}({{m}_{{{\text{NaCl}}}}})$$, $${\text{N}}{{{\text{a}}}_{2}}{\text{HP}}{{{\text{O}}}_{4}}({{m}_{{{\text{N}}{{{\text{a}}}_{2}}{\text{HP}}{{{\text{O}}}_{4}}}}})~$$|AgCl|Ag, type was employed for the EMF measurements. The experimental results from this work and the model of Pitzer’s were used to determine the mixing parameters. Good agreement was found between the experimental and calculated values of the mean ionic activity coefficients of NaCl with a standard deviation of fit 1.5 × 10–3. The values of the osmotic coefficients of the system {yNaCl + (1 – y)Na2HPO4}(aq) were estimated on the basis of the determined parameters and compared with literature data. The differences in the osmotic coefficients between the estimated and experimental values were negligible.
PB  - Pleiades Publishing
T2  - Russian Journal of Physical Chemistry A
T1  - Activity Coefficients of the System {yNaCl + (1 – y)Na2HPO4}(aq) at T = 298.15 K Determined by Electromotive Force Measurements
VL  - 97
IS  - 12
SP  - 2693
EP  - 2702
DO  - 10.1134/S0036024423120063
ER  - 

@article{
author = "Popović, D. Ž. and Ivanović, T. G. and Miladinović, J. and Miladinović, Z. P. and Pastor, F. T. and Zlatić, Aleksandra",
year = "2023",
abstract = "The mean ionic activity coefficients of NaCl in a ternary system {yNaCl + (1 – y)Na2HPO4}(aq) were determined from measurements of the electromotive force (EMF) where the NaCl ionic strength fraction was y = (0.3012; 0.4015; 0.5011; 0.5988; 0.7706; 0.8997) in the range of total ionic strength of the solution Im = 0.0701–1.0161 mol kg–1 at temperature T = 298.15 K. A cell of the Na–ISE|$${\text{NaCl}}({{m}_{{{\text{NaCl}}}}})$$, $${\text{N}}{{{\text{a}}}_{2}}{\text{HP}}{{{\text{O}}}_{4}}({{m}_{{{\text{N}}{{{\text{a}}}_{2}}{\text{HP}}{{{\text{O}}}_{4}}}}})~$$|AgCl|Ag, type was employed for the EMF measurements. The experimental results from this work and the model of Pitzer’s were used to determine the mixing parameters. Good agreement was found between the experimental and calculated values of the mean ionic activity coefficients of NaCl with a standard deviation of fit 1.5 × 10–3. The values of the osmotic coefficients of the system {yNaCl + (1 – y)Na2HPO4}(aq) were estimated on the basis of the determined parameters and compared with literature data. The differences in the osmotic coefficients between the estimated and experimental values were negligible.",
publisher = "Pleiades Publishing",
journal = "Russian Journal of Physical Chemistry A",
title = "Activity Coefficients of the System {yNaCl + (1 – y)Na2HPO4}(aq) at T = 298.15 K Determined by Electromotive Force Measurements",
volume = "97",
number = "12",
pages = "2693-2702",
doi = "10.1134/S0036024423120063"
}

Popović, D. Ž., Ivanović, T. G., Miladinović, J., Miladinović, Z. P., Pastor, F. T.,& Zlatić, A.. (2023). Activity Coefficients of the System {yNaCl + (1 – y)Na2HPO4}(aq) at T = 298.15 K Determined by Electromotive Force Measurements. in Russian Journal of Physical Chemistry A
Pleiades Publishing., 97(12), 2693-2702.
https://doi.org/10.1134/S0036024423120063

Popović DŽ, Ivanović TG, Miladinović J, Miladinović ZP, Pastor FT, Zlatić A. Activity Coefficients of the System {yNaCl + (1 – y)Na2HPO4}(aq) at T = 298.15 K Determined by Electromotive Force Measurements. in Russian Journal of Physical Chemistry A. 2023;97(12):2693-2702.
doi:10.1134/S0036024423120063 .

Popović, D. Ž., Ivanović, T. G., Miladinović, J., Miladinović, Z. P., Pastor, F. T., Zlatić, Aleksandra, "Activity Coefficients of the System {yNaCl + (1 – y)Na2HPO4}(aq) at T = 298.15 K Determined by Electromotive Force Measurements" in Russian Journal of Physical Chemistry A, 97, no. 12 (2023):2693-2702,
https://doi.org/10.1134/S0036024423120063 . .

TY  - JOUR
AU  - Stefanović, Milica
AU  - Šajnović, Aleksandra
AU  - Kašanin-Grubin, Milica
AU  - Vergari, Francesca
AU  - Troiani, Francesco
AU  - Moreno-de-las-Heras, Mariano
AU  - Gallart, Francesc
AU  - Desloges, Joseph
AU  - Jovančićević, Branimir
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6279
AB  - The aim of this study is to investigate the influence of weathering processes on the distribution of n-alkanes in unweathered and weathered samples of badland material. Organic matter (OM) of both the weathered and unweathered zones in badland environments is derived from the same sources such any differences between the n-alkane pattern of the two zones can be attributed to the impact of weathering processes under different climate conditions. Organic geochemical and mineralogical characterizations were employed to investigate twenty-one samples from weathered badland environments in Italy, Spain, and Canada that originally derive from marine, distal alluvial, and fluvial depositional settings, respectively. According to the distribution of n-alkanes and diterpanes, unweathered samples from Italy have an original mixed aquatic-terrestrial origin of OM, with a variable (low to moderate) contribution of terrestrial plants as precursors, while unweathered samples from Spain predominantly contain OM originating from submerged/floating macrophytes deposited under reducing conditions. Unweathered samples from Canada predominantly consist of terrigenous OM. Intensity of changes in n-alkanes distribution when subjected to weathering depends on the type of precursor biomass and quantity of smectite. Predominantly terrigenous OM under semi-arid conditions shows the highest affinity for adsorption is in contact with smectite surfaces. Mid- and long-chain odd n-alkanes have a tendency to build colloidal particles with polar organic compounds such as fatty acids by strong binding and thus their preservation from degradation is possible.
PB  - Elsevier
T2  - CATENA
T1  - Impact of weathering processes on n-alkane pattern in badlands
VL  - 231
SP  - 107352
DO  - 10.1016/j.catena.2023.107352
ER  - 

@article{
author = "Stefanović, Milica and Šajnović, Aleksandra and Kašanin-Grubin, Milica and Vergari, Francesca and Troiani, Francesco and Moreno-de-las-Heras, Mariano and Gallart, Francesc and Desloges, Joseph and Jovančićević, Branimir",
year = "2023",
abstract = "The aim of this study is to investigate the influence of weathering processes on the distribution of n-alkanes in unweathered and weathered samples of badland material. Organic matter (OM) of both the weathered and unweathered zones in badland environments is derived from the same sources such any differences between the n-alkane pattern of the two zones can be attributed to the impact of weathering processes under different climate conditions. Organic geochemical and mineralogical characterizations were employed to investigate twenty-one samples from weathered badland environments in Italy, Spain, and Canada that originally derive from marine, distal alluvial, and fluvial depositional settings, respectively. According to the distribution of n-alkanes and diterpanes, unweathered samples from Italy have an original mixed aquatic-terrestrial origin of OM, with a variable (low to moderate) contribution of terrestrial plants as precursors, while unweathered samples from Spain predominantly contain OM originating from submerged/floating macrophytes deposited under reducing conditions. Unweathered samples from Canada predominantly consist of terrigenous OM. Intensity of changes in n-alkanes distribution when subjected to weathering depends on the type of precursor biomass and quantity of smectite. Predominantly terrigenous OM under semi-arid conditions shows the highest affinity for adsorption is in contact with smectite surfaces. Mid- and long-chain odd n-alkanes have a tendency to build colloidal particles with polar organic compounds such as fatty acids by strong binding and thus their preservation from degradation is possible.",
publisher = "Elsevier",
journal = "CATENA",
title = "Impact of weathering processes on n-alkane pattern in badlands",
volume = "231",
pages = "107352",
doi = "10.1016/j.catena.2023.107352"
}

Stefanović, M., Šajnović, A., Kašanin-Grubin, M., Vergari, F., Troiani, F., Moreno-de-las-Heras, M., Gallart, F., Desloges, J.,& Jovančićević, B.. (2023). Impact of weathering processes on n-alkane pattern in badlands. in CATENA
Elsevier., 231, 107352.
https://doi.org/10.1016/j.catena.2023.107352

Stefanović M, Šajnović A, Kašanin-Grubin M, Vergari F, Troiani F, Moreno-de-las-Heras M, Gallart F, Desloges J, Jovančićević B. Impact of weathering processes on n-alkane pattern in badlands. in CATENA. 2023;231:107352.
doi:10.1016/j.catena.2023.107352 .

Stefanović, Milica, Šajnović, Aleksandra, Kašanin-Grubin, Milica, Vergari, Francesca, Troiani, Francesco, Moreno-de-las-Heras, Mariano, Gallart, Francesc, Desloges, Joseph, Jovančićević, Branimir, "Impact of weathering processes on n-alkane pattern in badlands" in CATENA, 231 (2023):107352,
https://doi.org/10.1016/j.catena.2023.107352 . .

TY  - JOUR
AU  - Radovanović, Dragana
AU  - Dikić, Jelena
AU  - Štulović, Marija
AU  - Anđić, Zoran
AU  - Kamberović, Željko
AU  - Jevtić, Sanja
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6300
AB  - Low-cost and easily available natural zeolite is a promising adsorbent for metal ions removal in wastewater treatment. The possibility of using zeolitic tuff from Serbia in the form of Na-enriched natural zeolite (Na-Z) for the adsorption of Pb2+, Zn2+, Cu2+, and Ni2+ ions from wastewater was investigated in the presented paper. The research included Na-Z characterization and determination of adsorption kinetics in individual ion adsorption tests using Weber-Morris intraparticle diffusion model, non-linear pseudo-first-order (PFO), pseudo-second-order (PSO) and mixed-order (MO) kinetic models. The results indicate that the adsorption processes of metal ions on Na-Z are complex processes dominated by multiple rate-limiting mechanisms and best defined by the MO model. The mechanisms of ion diffusion and adsorption to active sites are equally represented in the Pb2+ adsorption process. The mechanism of ion adsorption on the active sites is the rate-limiting step in the Zn2+ adsorption process, while in the case of the Cu2+ and Ni2+ adsorption ion diffusion is the rate-limiting kinetic mechanism. Within the MO model, the PFO rate (external/internal diffusion) and the PSO rate (adsorption on active sites) were calculated and results were applied to a multicomponent wastewater sample in order to determine and explain the adsorption efficiency in wastewater treatment. The results show that the rate of adsorption of individual metal ions and the efficiency of ion removal from a multicomponent wastewater sample are influenced by several factors including the radius of the hydrated ion and the free energy of hydration. The achieved removal of metal ions by Na-Z is Pb2+ (89%) > Cu2+ (72%) > Zn2+ (61%) > Ni2+ (58%) and defines Na-enriched natural zeolite as an effective adsorbent in wastewater treatment.
PB  - Association of Metallurgical Engineers of Serbia AMES
T2  - Metallurgical and Materials Engineering
T1  - Sorption of Pb2+, Zn2+, Cu2+ and Ni2+ Ions on Na-enriched Natural Zeolite for Wastewater Treatment Process: A Kinetic Approach
VL  - 29
IS  - 3
SP  - 20
EP  - 35
DO  - 10.56801/MME1007
ER  - 

@article{
author = "Radovanović, Dragana and Dikić, Jelena and Štulović, Marija and Anđić, Zoran and Kamberović, Željko and Jevtić, Sanja",
year = "2023",
abstract = "Low-cost and easily available natural zeolite is a promising adsorbent for metal ions removal in wastewater treatment. The possibility of using zeolitic tuff from Serbia in the form of Na-enriched natural zeolite (Na-Z) for the adsorption of Pb2+, Zn2+, Cu2+, and Ni2+ ions from wastewater was investigated in the presented paper. The research included Na-Z characterization and determination of adsorption kinetics in individual ion adsorption tests using Weber-Morris intraparticle diffusion model, non-linear pseudo-first-order (PFO), pseudo-second-order (PSO) and mixed-order (MO) kinetic models. The results indicate that the adsorption processes of metal ions on Na-Z are complex processes dominated by multiple rate-limiting mechanisms and best defined by the MO model. The mechanisms of ion diffusion and adsorption to active sites are equally represented in the Pb2+ adsorption process. The mechanism of ion adsorption on the active sites is the rate-limiting step in the Zn2+ adsorption process, while in the case of the Cu2+ and Ni2+ adsorption ion diffusion is the rate-limiting kinetic mechanism. Within the MO model, the PFO rate (external/internal diffusion) and the PSO rate (adsorption on active sites) were calculated and results were applied to a multicomponent wastewater sample in order to determine and explain the adsorption efficiency in wastewater treatment. The results show that the rate of adsorption of individual metal ions and the efficiency of ion removal from a multicomponent wastewater sample are influenced by several factors including the radius of the hydrated ion and the free energy of hydration. The achieved removal of metal ions by Na-Z is Pb2+ (89%) > Cu2+ (72%) > Zn2+ (61%) > Ni2+ (58%) and defines Na-enriched natural zeolite as an effective adsorbent in wastewater treatment.",
publisher = "Association of Metallurgical Engineers of Serbia AMES",
journal = "Metallurgical and Materials Engineering",
title = "Sorption of Pb2+, Zn2+, Cu2+ and Ni2+ Ions on Na-enriched Natural Zeolite for Wastewater Treatment Process: A Kinetic Approach",
volume = "29",
number = "3",
pages = "20-35",
doi = "10.56801/MME1007"
}

Radovanović, D., Dikić, J., Štulović, M., Anđić, Z., Kamberović, Ž.,& Jevtić, S.. (2023). Sorption of Pb2+, Zn2+, Cu2+ and Ni2+ Ions on Na-enriched Natural Zeolite for Wastewater Treatment Process: A Kinetic Approach. in Metallurgical and Materials Engineering
Association of Metallurgical Engineers of Serbia AMES., 29(3), 20-35.
https://doi.org/10.56801/MME1007

Radovanović D, Dikić J, Štulović M, Anđić Z, Kamberović Ž, Jevtić S. Sorption of Pb2+, Zn2+, Cu2+ and Ni2+ Ions on Na-enriched Natural Zeolite for Wastewater Treatment Process: A Kinetic Approach. in Metallurgical and Materials Engineering. 2023;29(3):20-35.
doi:10.56801/MME1007 .

Radovanović, Dragana, Dikić, Jelena, Štulović, Marija, Anđić, Zoran, Kamberović, Željko, Jevtić, Sanja, "Sorption of Pb2+, Zn2+, Cu2+ and Ni2+ Ions on Na-enriched Natural Zeolite for Wastewater Treatment Process: A Kinetic Approach" in Metallurgical and Materials Engineering, 29, no. 3 (2023):20-35,
https://doi.org/10.56801/MME1007 . .

TY  - JOUR
AU  - Ivanović, Tijana
AU  - Popović, Daniela Ž.
AU  - Miladinović, Jelena
AU  - Miladinović, Zoran P.
AU  - Pastor, Ferenc
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6090
AB  - Zero-current cell potential measurements were used to determine the solution activity coefficient in a ternary system {yKCl + (1 – y) KH2PO4}(aq) at temperature T = 298.15 K. The cell of the type K–ISE|KCl(mKCl), KH2PO4(mKH2PO4)|Ag|AgCl was used in the total ionic strength range, Im = 0.0886–1.0046 mol kg–1. In order to generate a set of parameters that can be applied in a wide range of mixed solution ionic strengths, the Pitzer, Scatchard, and Clegg–Pitzer–Brimblecombe models were used to fit all available experimental data, including cell potential and isopiestic measurements from the literature. The experimental and calculated values of thermodynamic properties for the studied system are in excellent agreement. Potential interactions and solution structure were discussed by means of the excess free energy of mixing via potential pairs, triplets, or quads for the investigated solution using the Scatchard model mixing parameters.
PB  - American Chemical Society
T2  - Journal of Chemical & Engineering Data
T1  - Activity Coefficients of the System {yKCl + (1 – y)KH2PO4}(aq) at T = 298.15 K Determined by Cell Potential Measurements
VL  - 68
IS  - 2
SP  - 405
EP  - 415
DO  - 10.1021/acs.jced.2c00704
ER  - 

@article{
author = "Ivanović, Tijana and Popović, Daniela Ž. and Miladinović, Jelena and Miladinović, Zoran P. and Pastor, Ferenc",
year = "2023",
abstract = "Zero-current cell potential measurements were used to determine the solution activity coefficient in a ternary system {yKCl + (1 – y) KH2PO4}(aq) at temperature T = 298.15 K. The cell of the type K–ISE|KCl(mKCl), KH2PO4(mKH2PO4)|Ag|AgCl was used in the total ionic strength range, Im = 0.0886–1.0046 mol kg–1. In order to generate a set of parameters that can be applied in a wide range of mixed solution ionic strengths, the Pitzer, Scatchard, and Clegg–Pitzer–Brimblecombe models were used to fit all available experimental data, including cell potential and isopiestic measurements from the literature. The experimental and calculated values of thermodynamic properties for the studied system are in excellent agreement. Potential interactions and solution structure were discussed by means of the excess free energy of mixing via potential pairs, triplets, or quads for the investigated solution using the Scatchard model mixing parameters.",
publisher = "American Chemical Society",
journal = "Journal of Chemical & Engineering Data",
title = "Activity Coefficients of the System {yKCl + (1 – y)KH2PO4}(aq) at T = 298.15 K Determined by Cell Potential Measurements",
volume = "68",
number = "2",
pages = "405-415",
doi = "10.1021/acs.jced.2c00704"
}

Ivanović, T., Popović, D. Ž., Miladinović, J., Miladinović, Z. P.,& Pastor, F.. (2023). Activity Coefficients of the System {yKCl + (1 – y)KH2PO4}(aq) at T = 298.15 K Determined by Cell Potential Measurements. in Journal of Chemical & Engineering Data
American Chemical Society., 68(2), 405-415.
https://doi.org/10.1021/acs.jced.2c00704

Ivanović T, Popović DŽ, Miladinović J, Miladinović ZP, Pastor F. Activity Coefficients of the System {yKCl + (1 – y)KH2PO4}(aq) at T = 298.15 K Determined by Cell Potential Measurements. in Journal of Chemical & Engineering Data. 2023;68(2):405-415.
doi:10.1021/acs.jced.2c00704 .

Ivanović, Tijana, Popović, Daniela Ž., Miladinović, Jelena, Miladinović, Zoran P., Pastor, Ferenc, "Activity Coefficients of the System {yKCl + (1 – y)KH2PO4}(aq) at T = 298.15 K Determined by Cell Potential Measurements" in Journal of Chemical & Engineering Data, 68, no. 2 (2023):405-415,
https://doi.org/10.1021/acs.jced.2c00704 . .

TY  - CONF
AU  - Rabrenović, Biljana
AU  - Akšić Fotirić, Milica
AU  - Rašović, Aleksandra
AU  - Dabic Zagorac, Dragana
AU  - Sredojević, Milica
AU  - Ćirić, Ivanka
AU  - Obradović, Nataša
AU  - Volić, Mina
AU  - Natić, Maja
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6319
AB  - U industriji sokova, prilikom proizvodnje soka od maline, seme se uklanja
kao neželjeni sastojak odnosno nusproizvod (biootpad). Inspirisani nelinearnim
pristupom „take-make-dispose-recycle”, pokušali smo da razvijemo strategiju za
valorizaciju semena maline u cilju dobijanja hladno presovanog ulja i bioaktivnih
ekstrakata iz pogače, sa mogućom primenom u prehrambenoj i kozmetičkoj industriji.
S obzirom da seme maline sadrži značajnu količinu ulja (10-23%) upotrebljeno je
za izdvajanje ulja postupkom hladnog presovanja. Ispitan je sastav masnih kiselina
gasnom hromatografijom metilestara kao i oksidativna stabilnost dobijenog ulja,
primenom Oxitest uređaja. Posle izdvajanja ulja, pogača, koja se takođe smatra
nusproizvodom, korišćena je za ekstrakciju bioaktivnih komponenti. Vodeći se
principom „zelene” ekstrakcije, primenjeno je nekoliko kombinacija rastvarača.
Rezultati ukupnog sadržaja polifenola i antioksidativne aktivnosti upotrebljeni su za
odabir najefikasnijeg ekstrakcionog sredstva.
PB  - Novi Sad : Industrijsko bilje
C3  - Production and Processing of Oilseeds, Proceedings of the 64th Oil Industry Conference, Herceg Novi, Crna Gora, 25-30. June 2023
T1  - Valorization of raspberry seeds in order to obtain cold- pressed oil and bioactive extracts from oil cake.
SP  - 129
EP  - 139
UR  - https://hdl.handle.net/21.15107/rcub_cherry_6319
ER  - 

@conference{
author = "Rabrenović, Biljana and Akšić Fotirić, Milica and Rašović, Aleksandra and Dabic Zagorac, Dragana and Sredojević, Milica and Ćirić, Ivanka and Obradović, Nataša and Volić, Mina and Natić, Maja",
year = "2023",
abstract = "U industriji sokova, prilikom proizvodnje soka od maline, seme se uklanja
kao neželjeni sastojak odnosno nusproizvod (biootpad). Inspirisani nelinearnim
pristupom „take-make-dispose-recycle”, pokušali smo da razvijemo strategiju za
valorizaciju semena maline u cilju dobijanja hladno presovanog ulja i bioaktivnih
ekstrakata iz pogače, sa mogućom primenom u prehrambenoj i kozmetičkoj industriji.
S obzirom da seme maline sadrži značajnu količinu ulja (10-23%) upotrebljeno je
za izdvajanje ulja postupkom hladnog presovanja. Ispitan je sastav masnih kiselina
gasnom hromatografijom metilestara kao i oksidativna stabilnost dobijenog ulja,
primenom Oxitest uređaja. Posle izdvajanja ulja, pogača, koja se takođe smatra
nusproizvodom, korišćena je za ekstrakciju bioaktivnih komponenti. Vodeći se
principom „zelene” ekstrakcije, primenjeno je nekoliko kombinacija rastvarača.
Rezultati ukupnog sadržaja polifenola i antioksidativne aktivnosti upotrebljeni su za
odabir najefikasnijeg ekstrakcionog sredstva.",
publisher = "Novi Sad : Industrijsko bilje",
journal = "Production and Processing of Oilseeds, Proceedings of the 64th Oil Industry Conference, Herceg Novi, Crna Gora, 25-30. June 2023",
title = "Valorization of raspberry seeds in order to obtain cold- pressed oil and bioactive extracts from oil cake.",
pages = "129-139",
url = "https://hdl.handle.net/21.15107/rcub_cherry_6319"
}

Rabrenović, B., Akšić Fotirić, M., Rašović, A., Dabic Zagorac, D., Sredojević, M., Ćirić, I., Obradović, N., Volić, M.,& Natić, M.. (2023). Valorization of raspberry seeds in order to obtain cold- pressed oil and bioactive extracts from oil cake.. in Production and Processing of Oilseeds, Proceedings of the 64th Oil Industry Conference, Herceg Novi, Crna Gora, 25-30. June 2023
Novi Sad : Industrijsko bilje., 129-139.
https://hdl.handle.net/21.15107/rcub_cherry_6319

Rabrenović B, Akšić Fotirić M, Rašović A, Dabic Zagorac D, Sredojević M, Ćirić I, Obradović N, Volić M, Natić M. Valorization of raspberry seeds in order to obtain cold- pressed oil and bioactive extracts from oil cake.. in Production and Processing of Oilseeds, Proceedings of the 64th Oil Industry Conference, Herceg Novi, Crna Gora, 25-30. June 2023. 2023;:129-139.
https://hdl.handle.net/21.15107/rcub_cherry_6319 .

Rabrenović, Biljana, Akšić Fotirić, Milica, Rašović, Aleksandra, Dabic Zagorac, Dragana, Sredojević, Milica, Ćirić, Ivanka, Obradović, Nataša, Volić, Mina, Natić, Maja, "Valorization of raspberry seeds in order to obtain cold- pressed oil and bioactive extracts from oil cake." in Production and Processing of Oilseeds, Proceedings of the 64th Oil Industry Conference, Herceg Novi, Crna Gora, 25-30. June 2023 (2023):129-139,
https://hdl.handle.net/21.15107/rcub_cherry_6319 .

TY  - JOUR
AU  - Nikolić, Vesna D.
AU  - Đokić, Jovana M.
AU  - Dinić, Denis P.
AU  - Marinković, Aleksandar 
AU  - Jevtić, Sanja O.
AU  - Anđić, Zoran M.
AU  - Kamberović, Željko J.
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6235
AB  - Porozna keramika sa industrijskog aspekta predstavlja značajan materijal, međutim, za njenu pripremu se još uvek traže ekonomski i tehnološki prihvatljiva rešenja. Kontrola poroznosti predstavlja ključan korak u postizanju željenih svojstava za određenu primenu. U cilju dobijanja multiporozne keramike u ovom radu korišćena je kaolinska glina i polistirenske perle kao organska žrtvena faza. Uzorci su nakon mešanja sinterovani na 1050 oC tokom 1 h. Karakterizacija je obuhvatila infracrvenu spektroskopiju sa Furijeovom transformacijom (FTIR), 
 kenirajuću elektronsku mikroskopiju (SEM), rendgensku difrakcionu analizu (XRPD), elementnu CHNS analizu i ispitivanje pritisne čvrstoće. Analiza dobijenih rezultata pokazala je da se hijerarhijski uređena, multiporozna keramika, odgovarajućih mehaničkih svojstava može pripremiti u prisustvu organske komponente čijim sagorevanjem tokom sinterovanja zaostaju pore različitih dimenzija.
AB  - From an industrial point of view, porous ceramics represent an important material, however, economically and technologically acceptable solutions are still being sought for its preparation. Porosity control is a key step in achieving the desired properties for a specific application. In order to obtain multiporous ceramics, in this work, kaolin clay and polystyrene beads were used as organic sacrificial phase. After mixing, the samples were sintered at 1050 oC for 1 h. Characterization included Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction analysis (XRPD), elemental CHNS analysis and compressive strength investigations. The analysis of the obtained results showed that hierarchically ordered, multiporous ceramics, with appropriate mechanical properties can be prepared in the presence of an organic component whose burnout during sintering leaves behind pores of different dimensions.
PB  - Beograd : Savez inženjera i tehničara Srbije
T2  - Tehnika - Novi materijali
T1  - Sinteza inovativnih keramičkih sorbenata i nosača katalizatora hijerarhijske poroznosti
VL  - 32
IS  - 3
SP  - 269
EP  - 273
DO  - 10.5937/tehnika2303269K
ER  - 

@article{
author = "Nikolić, Vesna D. and Đokić, Jovana M. and Dinić, Denis P. and Marinković, Aleksandar  and Jevtić, Sanja O. and Anđić, Zoran M. and Kamberović, Željko J.",
year = "2023",
abstract = "Porozna keramika sa industrijskog aspekta predstavlja značajan materijal, međutim, za njenu pripremu se još uvek traže ekonomski i tehnološki prihvatljiva rešenja. Kontrola poroznosti predstavlja ključan korak u postizanju željenih svojstava za određenu primenu. U cilju dobijanja multiporozne keramike u ovom radu korišćena je kaolinska glina i polistirenske perle kao organska žrtvena faza. Uzorci su nakon mešanja sinterovani na 1050 oC tokom 1 h. Karakterizacija je obuhvatila infracrvenu spektroskopiju sa Furijeovom transformacijom (FTIR), 
 kenirajuću elektronsku mikroskopiju (SEM), rendgensku difrakcionu analizu (XRPD), elementnu CHNS analizu i ispitivanje pritisne čvrstoće. Analiza dobijenih rezultata pokazala je da se hijerarhijski uređena, multiporozna keramika, odgovarajućih mehaničkih svojstava može pripremiti u prisustvu organske komponente čijim sagorevanjem tokom sinterovanja zaostaju pore različitih dimenzija., From an industrial point of view, porous ceramics represent an important material, however, economically and technologically acceptable solutions are still being sought for its preparation. Porosity control is a key step in achieving the desired properties for a specific application. In order to obtain multiporous ceramics, in this work, kaolin clay and polystyrene beads were used as organic sacrificial phase. After mixing, the samples were sintered at 1050 oC for 1 h. Characterization included Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction analysis (XRPD), elemental CHNS analysis and compressive strength investigations. The analysis of the obtained results showed that hierarchically ordered, multiporous ceramics, with appropriate mechanical properties can be prepared in the presence of an organic component whose burnout during sintering leaves behind pores of different dimensions.",
publisher = "Beograd : Savez inženjera i tehničara Srbije",
journal = "Tehnika - Novi materijali",
title = "Sinteza inovativnih keramičkih sorbenata i nosača katalizatora hijerarhijske poroznosti",
volume = "32",
number = "3",
pages = "269-273",
doi = "10.5937/tehnika2303269K"
}

Nikolić, V. D., Đokić, J. M., Dinić, D. P., Marinković, A., Jevtić, S. O., Anđić, Z. M.,& Kamberović, Ž. J.. (2023). Sinteza inovativnih keramičkih sorbenata i nosača katalizatora hijerarhijske poroznosti. in Tehnika - Novi materijali
Beograd : Savez inženjera i tehničara Srbije., 32(3), 269-273.
https://doi.org/10.5937/tehnika2303269K

Nikolić VD, Đokić JM, Dinić DP, Marinković A, Jevtić SO, Anđić ZM, Kamberović ŽJ. Sinteza inovativnih keramičkih sorbenata i nosača katalizatora hijerarhijske poroznosti. in Tehnika - Novi materijali. 2023;32(3):269-273.
doi:10.5937/tehnika2303269K .

Nikolić, Vesna D., Đokić, Jovana M., Dinić, Denis P., Marinković, Aleksandar , Jevtić, Sanja O., Anđić, Zoran M., Kamberović, Željko J., "Sinteza inovativnih keramičkih sorbenata i nosača katalizatora hijerarhijske poroznosti" in Tehnika - Novi materijali, 32, no. 3 (2023):269-273,
https://doi.org/10.5937/tehnika2303269K . .

TY  - CONF
AU  - Đokić, Jovana
AU  - Štulović, Marija
AU  - Korać, Marija
AU  - Anđić, Zoran
AU  - Kamberović, Željko
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6305
AB  - More than 90 % of lead produced in Europe comes from secondary lead flows, of
which 85 % is attributed to waste lead-acid batteries (LAB). The main technological
approach for LAB processing implies pyrometallurgy by which 100–400 kg of waste slag
(WS) is generated per 1 ton of produced metallic lead. Due to recycling process parameters,
generated WS has great potential for releasing toxic elements contributing to environmental
pollution [1]. Namely, the most common flux in the recycling process is sodium-based
(Na2CO3) when alkali lead waste slag (ALWS) is generated, characterized as hazardous due
to its physical-chemical characteristics: high leachability, hygroscopic and pulverized
nature and, ultimately, instability [2,3]. Therefore, ALWS treatment prior to disposal should
be considered an integral part of waste LAB treatment systems. Immobilization of toxic
elements contained in slag is crucial and can be achieved by stabilization/solidification
processes (S/S) as one of the most widely used technologies in the treatment of heavy metal containing wastes for final disposal or utilization.
In this research, ALWS generated in the waste LAB recycling is used to determine
the S/S process efficiency as a function of the added binder amount (cement, in the range of
5 – 10 %), pre-treatment (the removal of water-soluble compounds), and activator addition
(MgO). The liquid to solid (L/S) ratio was 1/4 in all S/S experiments. The basic parameters
for the effectiveness assessments were compressive strength (UCS) and pollutants leaching
(Method 1311 Toxicity characteristic leaching procedure, TCLP).
The conclusion is that, contrary to the pre-treatment process, the addition of MgO has
an overall positive effect on the S/S process of ALSW, ensuring both mechanical and
chemical stability. This ALWS solidificate, obtained through the S/S process by using MgO
as an activator, is safe for disposal, according to environmental regulations.
PB  - Belgrade : Serbian Chemical Society
C3  - 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023
T1  - Stabilization/solidification process of alkali lead waste slag: influence of pre-treatment and addition of selected additives
SP  - 177
EP  - 178
UR  - https://hdl.handle.net/21.15107/rcub_cherry_6305
ER  - 

@conference{
author = "Đokić, Jovana and Štulović, Marija and Korać, Marija and Anđić, Zoran and Kamberović, Željko",
year = "2023",
abstract = "More than 90 % of lead produced in Europe comes from secondary lead flows, of
which 85 % is attributed to waste lead-acid batteries (LAB). The main technological
approach for LAB processing implies pyrometallurgy by which 100–400 kg of waste slag
(WS) is generated per 1 ton of produced metallic lead. Due to recycling process parameters,
generated WS has great potential for releasing toxic elements contributing to environmental
pollution [1]. Namely, the most common flux in the recycling process is sodium-based
(Na2CO3) when alkali lead waste slag (ALWS) is generated, characterized as hazardous due
to its physical-chemical characteristics: high leachability, hygroscopic and pulverized
nature and, ultimately, instability [2,3]. Therefore, ALWS treatment prior to disposal should
be considered an integral part of waste LAB treatment systems. Immobilization of toxic
elements contained in slag is crucial and can be achieved by stabilization/solidification
processes (S/S) as one of the most widely used technologies in the treatment of heavy metal containing wastes for final disposal or utilization.
In this research, ALWS generated in the waste LAB recycling is used to determine
the S/S process efficiency as a function of the added binder amount (cement, in the range of
5 – 10 %), pre-treatment (the removal of water-soluble compounds), and activator addition
(MgO). The liquid to solid (L/S) ratio was 1/4 in all S/S experiments. The basic parameters
for the effectiveness assessments were compressive strength (UCS) and pollutants leaching
(Method 1311 Toxicity characteristic leaching procedure, TCLP).
The conclusion is that, contrary to the pre-treatment process, the addition of MgO has
an overall positive effect on the S/S process of ALSW, ensuring both mechanical and
chemical stability. This ALWS solidificate, obtained through the S/S process by using MgO
as an activator, is safe for disposal, according to environmental regulations.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023",
title = "Stabilization/solidification process of alkali lead waste slag: influence of pre-treatment and addition of selected additives",
pages = "177-178",
url = "https://hdl.handle.net/21.15107/rcub_cherry_6305"
}

Đokić, J., Štulović, M., Korać, M., Anđić, Z.,& Kamberović, Ž.. (2023). Stabilization/solidification process of alkali lead waste slag: influence of pre-treatment and addition of selected additives. in 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023
Belgrade : Serbian Chemical Society., 177-178.
https://hdl.handle.net/21.15107/rcub_cherry_6305

Đokić J, Štulović M, Korać M, Anđić Z, Kamberović Ž. Stabilization/solidification process of alkali lead waste slag: influence of pre-treatment and addition of selected additives. in 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023. 2023;:177-178.
https://hdl.handle.net/21.15107/rcub_cherry_6305 .

Đokić, Jovana, Štulović, Marija, Korać, Marija, Anđić, Zoran, Kamberović, Željko, "Stabilization/solidification process of alkali lead waste slag: influence of pre-treatment and addition of selected additives" in 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023 (2023):177-178,
https://hdl.handle.net/21.15107/rcub_cherry_6305 .

TY  - CONF
AU  - Sokić, Katarina
AU  - Dikić, Jelena
AU  - Veljović, Đorđe
AU  - Đokić, Jovana
AU  - Anđić, Zoran
AU  - Jevtić, Sanja O.
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6243
AB  - Natural zeolite is a good sorbent for many cations due to its specific porous structure. The degree of sorption efficiency depends on the cation type and the availability of exchange positions in the zeolite lattice. The aim of this work is to
examine the synthesis possibility of a new adsorbent based on natural zeolite and hydroxyapatite. The adsorbent was prepared mechanochemically by using clinoptilolite-rich zeolite tuff from the Slanci deposit (Serbia) and hydroxyapatite
obtained by the hydrothermal process. The milling process was performed in a ball mill and optimized regarding contact time and milling speed. For the synthesis of zeolite/hydroxyapatite adsorbent (ZHAp), optimal values for these two parameters were 10 min and 250 rpm, respectively. The resulting sample ZHAp was characterized by X-ray powder diffraction, thermal analysis and scanning electron microscopy. Diffraction analysis of the ZHAp confirmed the presence of the most abundant mineral in zeolite tuff - clinoptilolite and hydroxyapatite. Needle-like crystals of hydroxyapatite on the clinoptilolite surface are observed in SEM images. Zeolite/hydroxyapatite sample is thermally stable at 800 °C. Adsorption properties of ZHAp were examined for nickel and chromium ions, towards which natural zeolite shows a low affinity. The presence of hydroxyapatite on the zeolite surface led to an increase in the adsorption capacity more than two times for both tested ions compared to the initial zeolite tuff.
PB  - Association of Metallurgical Engineers of Serbia (AMES)
C3  - 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
T1  - Mechanochemical synthesis and characterization of the adsorbents based on natural zeolite and hydroxyapatite
SP  - 395
EP  - 400
UR  - https://hdl.handle.net/21.15107/rcub_cherry_6243
ER  - 

@conference{
author = "Sokić, Katarina and Dikić, Jelena and Veljović, Đorđe and Đokić, Jovana and Anđić, Zoran and Jevtić, Sanja O.",
year = "2023",
abstract = "Natural zeolite is a good sorbent for many cations due to its specific porous structure. The degree of sorption efficiency depends on the cation type and the availability of exchange positions in the zeolite lattice. The aim of this work is to
examine the synthesis possibility of a new adsorbent based on natural zeolite and hydroxyapatite. The adsorbent was prepared mechanochemically by using clinoptilolite-rich zeolite tuff from the Slanci deposit (Serbia) and hydroxyapatite
obtained by the hydrothermal process. The milling process was performed in a ball mill and optimized regarding contact time and milling speed. For the synthesis of zeolite/hydroxyapatite adsorbent (ZHAp), optimal values for these two parameters were 10 min and 250 rpm, respectively. The resulting sample ZHAp was characterized by X-ray powder diffraction, thermal analysis and scanning electron microscopy. Diffraction analysis of the ZHAp confirmed the presence of the most abundant mineral in zeolite tuff - clinoptilolite and hydroxyapatite. Needle-like crystals of hydroxyapatite on the clinoptilolite surface are observed in SEM images. Zeolite/hydroxyapatite sample is thermally stable at 800 °C. Adsorption properties of ZHAp were examined for nickel and chromium ions, towards which natural zeolite shows a low affinity. The presence of hydroxyapatite on the zeolite surface led to an increase in the adsorption capacity more than two times for both tested ions compared to the initial zeolite tuff.",
publisher = "Association of Metallurgical Engineers of Serbia (AMES)",
journal = "5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023",
title = "Mechanochemical synthesis and characterization of the adsorbents based on natural zeolite and hydroxyapatite",
pages = "395-400",
url = "https://hdl.handle.net/21.15107/rcub_cherry_6243"
}

Sokić, K., Dikić, J., Veljović, Đ., Đokić, J., Anđić, Z.,& Jevtić, S. O.. (2023). Mechanochemical synthesis and characterization of the adsorbents based on natural zeolite and hydroxyapatite. in 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023
Association of Metallurgical Engineers of Serbia (AMES)., 395-400.
https://hdl.handle.net/21.15107/rcub_cherry_6243

Sokić K, Dikić J, Veljović Đ, Đokić J, Anđić Z, Jevtić SO. Mechanochemical synthesis and characterization of the adsorbents based on natural zeolite and hydroxyapatite. in 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023. 2023;:395-400.
https://hdl.handle.net/21.15107/rcub_cherry_6243 .

Sokić, Katarina, Dikić, Jelena, Veljović, Đorđe, Đokić, Jovana, Anđić, Zoran, Jevtić, Sanja O., "Mechanochemical synthesis and characterization of the adsorbents based on natural zeolite and hydroxyapatite" in 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023 (2023):395-400,
https://hdl.handle.net/21.15107/rcub_cherry_6243 .

TY  - CONF
AU  - Đokić, Jovana
AU  - Gajić, Nataša
AU  - Anđić, Dimitrije Z.
AU  - Kamberović, Željko
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6237
AB  - During the conventional roast–leach–electrolysis (RLE) zinc production process, precipitation of the jarosite-type compounds is widely used to remove iron and other metal impurities from the solution. Above mentioned compounds, with the general formula MFe3(SO4)2(OH)6, (M+=NH4, Na, K, Ag, etc.), in addition to iron, contain a high concentration of Pb, Cd, Cr, As, Zn, In, Ga, Ge as metal oxides and/or sulfates [1]. Consequently, jarosite is considered hazardous yet valuable waste [2]. In addition, every year around 6-7 million tonnes of jarosite waste is generated globally [3]. Due to large waste volumes and its chemical characteristics, jarosite requires a lot of storage space and monitoring. Unfortunately, this type of waste is often landfilled causing serious environmental problems and irreversible metal and value losses. Hence, an urgent solution for both managing and utilization/recycling is required, to face needs regarding ecological demands and circular economy goals.
In this paper, jarosite sludge, as a specific type of hazardous industrial waste, is used to investigate transformation to the targeted compounds through the comprehensive thermodynamic analysis and experimental roasting process tests. The roasting was conducted to transform iron into insoluble hematite (Fe2O3), valuable metals (Zn, Cu, and In) into water-soluble sulfates, and to keep Pb in the form of water-insoluble anglesite (PbSO4). The solid residue obtained after roasting was used in leaching tests to further evaluate the efficiency of the targeted phase transformations.
Theoretical considerations of chemical reactions and phase thermodynamics were performed using the HSC Chemistry v.9.2.3 software [4] to define potential chemical reactions, examine the feasibility of the target transformations, and set the limiting reaction parameters. Further, in the first part of the experimental work, the influence of the roasting process and reaction parameters on the transformation of jarosite sludge phases into target compounds was investigated. This included variations in the reaction time, temperature, and furnace atmosphere influence. The leaching conditions were kept constant (temperature of 25 °C, during 60 min, and solid to liquid ratio of 1/5) to determine the efficiency of phase transformations in the samples obtained by roasting. Changes in the chemical and mineralogical composition and microstructure were analyzed using different analytical methods, including XRD and SEM analysis.
According to the obtained results of the roasting process, it was determined that the phase transformation of jarosite sludge compounds into targeted insoluble hematite and water-soluble sulfates occurs at 730 °C, the time required is 60 min in the air (oxidizing) atmosphere of 1-2 [dm3/h]/kg of the input material, which is in accordance with the results of the theoretical indications. Also, it is experimentally confirmed that the introduction of sulfate into the roasting
 
atmosphere leads to the incomplete transformation of jarosite and the formation of the unwanted Fe2(SO4)3. Leaching results of the sample obtained by the abovementioned optimal roasting conditions show that only 4.5% of Fe is leached while the rest remains as solid targeted hematite. Also, more than 75% of In and more than 90% of other targeted metals (Cu and Zn) are leached, indicating the high efficiency of the roasting process. Phase transformation was confirmed by SEM analysis, showing that hexagonal crystals of jarosite, dominating in the starting material, were completely replaced with the globular microstructure of Fe2O3, in the roasted samples. SEM analysis of the leaching residue also confirmed the absence of the water-soluble sulfates and the presence of the anglesite as water-insoluble sulfate. The phase composition of the samples is confirmed by XRD analysis.
This research shows that the proposed process enables the recycling of jarosite through metal transformation and further utilization. The obtained products can be used in industry, while the metal ions can be selectively separated from the sulfate solution and returned to the production streams. This approach contributes to the utilization of jarosite, as hazardous waste, in order to obtain valuable metals, and generally reduces the negative environmental impact by decreasing the amount of disposed waste and reducing the need for primary exploitation.
PB  - Belgrade : Serbian Chemical Society
C3  - 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023
T1  - Jarosite sludge - utilization and valuable metals recovery applying roasting-leaching process
UR  - https://hdl.handle.net/21.15107/rcub_cherry_6237
ER  - 

@conference{
author = "Đokić, Jovana and Gajić, Nataša and Anđić, Dimitrije Z. and Kamberović, Željko",
year = "2023",
abstract = "During the conventional roast–leach–electrolysis (RLE) zinc production process, precipitation of the jarosite-type compounds is widely used to remove iron and other metal impurities from the solution. Above mentioned compounds, with the general formula MFe3(SO4)2(OH)6, (M+=NH4, Na, K, Ag, etc.), in addition to iron, contain a high concentration of Pb, Cd, Cr, As, Zn, In, Ga, Ge as metal oxides and/or sulfates [1]. Consequently, jarosite is considered hazardous yet valuable waste [2]. In addition, every year around 6-7 million tonnes of jarosite waste is generated globally [3]. Due to large waste volumes and its chemical characteristics, jarosite requires a lot of storage space and monitoring. Unfortunately, this type of waste is often landfilled causing serious environmental problems and irreversible metal and value losses. Hence, an urgent solution for both managing and utilization/recycling is required, to face needs regarding ecological demands and circular economy goals.
In this paper, jarosite sludge, as a specific type of hazardous industrial waste, is used to investigate transformation to the targeted compounds through the comprehensive thermodynamic analysis and experimental roasting process tests. The roasting was conducted to transform iron into insoluble hematite (Fe2O3), valuable metals (Zn, Cu, and In) into water-soluble sulfates, and to keep Pb in the form of water-insoluble anglesite (PbSO4). The solid residue obtained after roasting was used in leaching tests to further evaluate the efficiency of the targeted phase transformations.
Theoretical considerations of chemical reactions and phase thermodynamics were performed using the HSC Chemistry v.9.2.3 software [4] to define potential chemical reactions, examine the feasibility of the target transformations, and set the limiting reaction parameters. Further, in the first part of the experimental work, the influence of the roasting process and reaction parameters on the transformation of jarosite sludge phases into target compounds was investigated. This included variations in the reaction time, temperature, and furnace atmosphere influence. The leaching conditions were kept constant (temperature of 25 °C, during 60 min, and solid to liquid ratio of 1/5) to determine the efficiency of phase transformations in the samples obtained by roasting. Changes in the chemical and mineralogical composition and microstructure were analyzed using different analytical methods, including XRD and SEM analysis.
According to the obtained results of the roasting process, it was determined that the phase transformation of jarosite sludge compounds into targeted insoluble hematite and water-soluble sulfates occurs at 730 °C, the time required is 60 min in the air (oxidizing) atmosphere of 1-2 [dm3/h]/kg of the input material, which is in accordance with the results of the theoretical indications. Also, it is experimentally confirmed that the introduction of sulfate into the roasting
 
atmosphere leads to the incomplete transformation of jarosite and the formation of the unwanted Fe2(SO4)3. Leaching results of the sample obtained by the abovementioned optimal roasting conditions show that only 4.5% of Fe is leached while the rest remains as solid targeted hematite. Also, more than 75% of In and more than 90% of other targeted metals (Cu and Zn) are leached, indicating the high efficiency of the roasting process. Phase transformation was confirmed by SEM analysis, showing that hexagonal crystals of jarosite, dominating in the starting material, were completely replaced with the globular microstructure of Fe2O3, in the roasted samples. SEM analysis of the leaching residue also confirmed the absence of the water-soluble sulfates and the presence of the anglesite as water-insoluble sulfate. The phase composition of the samples is confirmed by XRD analysis.
This research shows that the proposed process enables the recycling of jarosite through metal transformation and further utilization. The obtained products can be used in industry, while the metal ions can be selectively separated from the sulfate solution and returned to the production streams. This approach contributes to the utilization of jarosite, as hazardous waste, in order to obtain valuable metals, and generally reduces the negative environmental impact by decreasing the amount of disposed waste and reducing the need for primary exploitation.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023",
title = "Jarosite sludge - utilization and valuable metals recovery applying roasting-leaching process",
url = "https://hdl.handle.net/21.15107/rcub_cherry_6237"
}

Đokić, J., Gajić, N., Anđić, D. Z.,& Kamberović, Ž.. (2023). Jarosite sludge - utilization and valuable metals recovery applying roasting-leaching process. in 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023
Belgrade : Serbian Chemical Society..
https://hdl.handle.net/21.15107/rcub_cherry_6237

Đokić J, Gajić N, Anđić DZ, Kamberović Ž. Jarosite sludge - utilization and valuable metals recovery applying roasting-leaching process. in 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023. 2023;.
https://hdl.handle.net/21.15107/rcub_cherry_6237 .

Đokić, Jovana, Gajić, Nataša, Anđić, Dimitrije Z., Kamberović, Željko, "Jarosite sludge - utilization and valuable metals recovery applying roasting-leaching process" in 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023 (2023),
https://hdl.handle.net/21.15107/rcub_cherry_6237 .

TY  - CONF
AU  - Đokić, Jovana
AU  - Štulović, Marija
AU  - Korać, Marija
AU  - Anđić, Zoran
AU  - Kamberović, Željko
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6236
AB  - More than 90% of lead produced in Europe comes from secondary lead flows, of which 85% is attributed to waste lead-acid batteries (LAB). The main technological approach for LAB processing implies pyrometallurgy by which 100–400 kg of waste slag (WS) is generated per 1 ton of produced metallic lead. Due to recycling process parameters, generated WS has great potential for releasing toxic elements contributing to environmental pollution [1]. Namely, the most common flux in the recycling process is sodium-based (Na2CO3) when alkali lead waste slag (ALWS) is generated, characterized as hazardous due to its physical-chemical characteristics: high leachability, hygroscopic and pulverized nature and, ultimately, instability [2,3]. Therefore, ALWS treatment prior to disposal should be considered an integral part of waste LAB treatment systems. Immobilization of toxic elements contained in slag is crucial and can be achieved by stabilization/solidification processes (S/S) as one of the most widely used technologies in the treatment of heavy metal-containing wastes for final disposal or utilization.
In this research, ALWS generated in the waste LAB recycling is used to determine the S/S process efficiency as a function of the added binder amount (cement, in the range of 5 – 10 %), pre-treatment (the removal of water-soluble compounds), and activator addition (MgO). The liquid to solid (L/S) ratio was 1/4 in all S/S experiments. The basic parameters for the effectiveness assessments were compressive strength (UCS) and pollutants leaching (Method 1311 Toxicity characteristic leaching procedure, TCLP).
ALWS containing 3.5 Pb, 15.5 Na, 14.0 S, and 24.7 Fe was mixed with cement and water. The results of UCS showed that all produced solidificates exceeded the required value of 0.35 MPa [4], yet the mixture containing 7.5 % of the cement has the best mechanical properties (2.1 MPa). This sample was further analyzed and the TCLP results showed that the Pb concentration exceeds the limit values for stabilized slag (10.4 and 5 ppm, respectively). In the next set, ALWS was pre-treated by continuous rinser (30 ºC, 60 min, L/S 4). Obtained results of UCS (0.4 MPa) and TCLP (53.4 ppm) were unfavorable. The last set, besides the binder, included activator addition (MgO, 7.5 %) altogether with a high content of untreated ALWS (85 %). Analysis of the produced solidificates showed favorable and acceptable results (USC - 3.3 MPa, TCLP – Pb 4.5 ppm). 
Generally, in an alkaline slag-leaching solution lead precipitates as a complex mixture (PbO, Pb(OH)2, PbO×Pb(OH)2). Lead oxides are amphoteric and dissolve in an alkaline aqueous solution, leading to poor solidification. Also, lead present in surface coatings around cement grains prevents cement hydration. Simultaneously, the migration of lead to the surrounding water is promoted. The negative effect of the pre-treatment is a consequence of the sulfate ions absence, as well as the absence of the ettringite (Ca6Al2(SO4)3(OH)12×26H2O) and sulfate- AFm phases [5], which negatively affect the strength of the product. The addition of MgO benefits the S/S process through hydrotalcite-like phase formation ([M1-
2+M 3+(OH) ][A   n-×mH O], M2+=Mg, Zn, Ni, Fe; M3+=Al, Cr, Fe; A=CO 2-,
NO -, Cl-), a compound capable of metal adsorption, hence immobilization [6].
The conclusion is that, contrary to the pre-treatment process, the addition of MgO has an overall positive effect on the S/S process of ALSW, ensuring both mechanical and chemical stability. This ALWS solidificate, obtained through the S/S process by using MgO as an activator, is safe for disposal, according to environmental regulations.
PB  - Belgrade : Serbian Chemical Society
C3  - 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023
T1  - Stabilization/solidification process of alkali lead waste slag: influence of pretreatment and addition of selected additives
UR  - https://hdl.handle.net/21.15107/rcub_cherry_6236
ER  - 

@conference{
author = "Đokić, Jovana and Štulović, Marija and Korać, Marija and Anđić, Zoran and Kamberović, Željko",
year = "2023",
abstract = "More than 90% of lead produced in Europe comes from secondary lead flows, of which 85% is attributed to waste lead-acid batteries (LAB). The main technological approach for LAB processing implies pyrometallurgy by which 100–400 kg of waste slag (WS) is generated per 1 ton of produced metallic lead. Due to recycling process parameters, generated WS has great potential for releasing toxic elements contributing to environmental pollution [1]. Namely, the most common flux in the recycling process is sodium-based (Na2CO3) when alkali lead waste slag (ALWS) is generated, characterized as hazardous due to its physical-chemical characteristics: high leachability, hygroscopic and pulverized nature and, ultimately, instability [2,3]. Therefore, ALWS treatment prior to disposal should be considered an integral part of waste LAB treatment systems. Immobilization of toxic elements contained in slag is crucial and can be achieved by stabilization/solidification processes (S/S) as one of the most widely used technologies in the treatment of heavy metal-containing wastes for final disposal or utilization.
In this research, ALWS generated in the waste LAB recycling is used to determine the S/S process efficiency as a function of the added binder amount (cement, in the range of 5 – 10 %), pre-treatment (the removal of water-soluble compounds), and activator addition (MgO). The liquid to solid (L/S) ratio was 1/4 in all S/S experiments. The basic parameters for the effectiveness assessments were compressive strength (UCS) and pollutants leaching (Method 1311 Toxicity characteristic leaching procedure, TCLP).
ALWS containing 3.5 Pb, 15.5 Na, 14.0 S, and 24.7 Fe was mixed with cement and water. The results of UCS showed that all produced solidificates exceeded the required value of 0.35 MPa [4], yet the mixture containing 7.5 % of the cement has the best mechanical properties (2.1 MPa). This sample was further analyzed and the TCLP results showed that the Pb concentration exceeds the limit values for stabilized slag (10.4 and 5 ppm, respectively). In the next set, ALWS was pre-treated by continuous rinser (30 ºC, 60 min, L/S 4). Obtained results of UCS (0.4 MPa) and TCLP (53.4 ppm) were unfavorable. The last set, besides the binder, included activator addition (MgO, 7.5 %) altogether with a high content of untreated ALWS (85 %). Analysis of the produced solidificates showed favorable and acceptable results (USC - 3.3 MPa, TCLP – Pb 4.5 ppm). 
Generally, in an alkaline slag-leaching solution lead precipitates as a complex mixture (PbO, Pb(OH)2, PbO×Pb(OH)2). Lead oxides are amphoteric and dissolve in an alkaline aqueous solution, leading to poor solidification. Also, lead present in surface coatings around cement grains prevents cement hydration. Simultaneously, the migration of lead to the surrounding water is promoted. The negative effect of the pre-treatment is a consequence of the sulfate ions absence, as well as the absence of the ettringite (Ca6Al2(SO4)3(OH)12×26H2O) and sulfate- AFm phases [5], which negatively affect the strength of the product. The addition of MgO benefits the S/S process through hydrotalcite-like phase formation ([M1-
2+M 3+(OH) ][A   n-×mH O], M2+=Mg, Zn, Ni, Fe; M3+=Al, Cr, Fe; A=CO 2-,
NO -, Cl-), a compound capable of metal adsorption, hence immobilization [6].
The conclusion is that, contrary to the pre-treatment process, the addition of MgO has an overall positive effect on the S/S process of ALSW, ensuring both mechanical and chemical stability. This ALWS solidificate, obtained through the S/S process by using MgO as an activator, is safe for disposal, according to environmental regulations.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023",
title = "Stabilization/solidification process of alkali lead waste slag: influence of pretreatment and addition of selected additives",
url = "https://hdl.handle.net/21.15107/rcub_cherry_6236"
}

Đokić, J., Štulović, M., Korać, M., Anđić, Z.,& Kamberović, Ž.. (2023). Stabilization/solidification process of alkali lead waste slag: influence of pretreatment and addition of selected additives. in 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023
Belgrade : Serbian Chemical Society..
https://hdl.handle.net/21.15107/rcub_cherry_6236

Đokić J, Štulović M, Korać M, Anđić Z, Kamberović Ž. Stabilization/solidification process of alkali lead waste slag: influence of pretreatment and addition of selected additives. in 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023. 2023;.
https://hdl.handle.net/21.15107/rcub_cherry_6236 .

Đokić, Jovana, Štulović, Marija, Korać, Marija, Anđić, Zoran, Kamberović, Željko, "Stabilization/solidification process of alkali lead waste slag: influence of pretreatment and addition of selected additives" in 9th Symposium Chemistry and Environmental Protection EnviroChem2023 with International Participation, Book of Abstracts, Kladovo, June 4-7, 2023 (2023),
https://hdl.handle.net/21.15107/rcub_cherry_6236 .

TY  - JOUR
AU  - Maletić, Marina
AU  - Kalijadis, Ana
AU  - Lazović, Vladimir
AU  - Trifunović, Snežana S.
AU  - Babić, Biljana
AU  - Dapčević, Aleksandra
AU  - Kovač, Janez
AU  - Vukčević, Marija
PY  - 2023
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6177
AB  - N-doped TiO2/carbon composites (TiO2/CN) with different nitrogen content, were obtained starting from titanium isopropoxide and glucose, and by varying the amount of melamine, added to starting reaction mixture. For com­parison, an undoped sample (TiO2/C) was also prepared. Structural and surface characteristics were determined through scanning electron microscopy, thermo­gravimetric analysis, elemental analysis, Fourier transform infrared spectro­scopy, X-ray photoelectron spectroscopy, X-ray diffraction and nitrogen ads­orption–desorption isotherms. The photocatalytic activity of TiO2/CN com­posites was examined via photocatalytic degradation of methylene blue and multiclass pharmaceuticals from water solution. It was found that N doping of TiO2/carbon composites induced changes in structural and surface character­istics of TiO2/CN composites, improving their adsorption, but decreasing photocatalytic efficiency. Nevertheless, TiO2/CN0.05 composite obtained by the hydrothermal synthesis in the presence of glucose and 0.05 g melamine showed the highest efficiency for removing selected pharmaceuticals and methylene blue from aqueous solutions through the combined processes of adsorption in the dark, and photocatalytic degradation under UV and visible irradiation.
T2  - Journal of the Serbian Chemical Society
T1  - Influence of N doping on structural and photocatalytic properties of hydrothermally synthesized TiO2/carbon composites: Scientific paper
VL  - 88
IS  - 2
SP  - 183
EP  - 197
DO  - 10.2298/JSC220608079M
ER  - 

@article{
author = "Maletić, Marina and Kalijadis, Ana and Lazović, Vladimir and Trifunović, Snežana S. and Babić, Biljana and Dapčević, Aleksandra and Kovač, Janez and Vukčević, Marija",
year = "2023",
abstract = "N-doped TiO2/carbon composites (TiO2/CN) with different nitrogen content, were obtained starting from titanium isopropoxide and glucose, and by varying the amount of melamine, added to starting reaction mixture. For com­parison, an undoped sample (TiO2/C) was also prepared. Structural and surface characteristics were determined through scanning electron microscopy, thermo­gravimetric analysis, elemental analysis, Fourier transform infrared spectro­scopy, X-ray photoelectron spectroscopy, X-ray diffraction and nitrogen ads­orption–desorption isotherms. The photocatalytic activity of TiO2/CN com­posites was examined via photocatalytic degradation of methylene blue and multiclass pharmaceuticals from water solution. It was found that N doping of TiO2/carbon composites induced changes in structural and surface character­istics of TiO2/CN composites, improving their adsorption, but decreasing photocatalytic efficiency. Nevertheless, TiO2/CN0.05 composite obtained by the hydrothermal synthesis in the presence of glucose and 0.05 g melamine showed the highest efficiency for removing selected pharmaceuticals and methylene blue from aqueous solutions through the combined processes of adsorption in the dark, and photocatalytic degradation under UV and visible irradiation.",
journal = "Journal of the Serbian Chemical Society",
title = "Influence of N doping on structural and photocatalytic properties of hydrothermally synthesized TiO2/carbon composites: Scientific paper",
volume = "88",
number = "2",
pages = "183-197",
doi = "10.2298/JSC220608079M"
}

Maletić, M., Kalijadis, A., Lazović, V., Trifunović, S. S., Babić, B., Dapčević, A., Kovač, J.,& Vukčević, M.. (2023). Influence of N doping on structural and photocatalytic properties of hydrothermally synthesized TiO2/carbon composites: Scientific paper. in Journal of the Serbian Chemical Society, 88(2), 183-197.
https://doi.org/10.2298/JSC220608079M

Maletić M, Kalijadis A, Lazović V, Trifunović SS, Babić B, Dapčević A, Kovač J, Vukčević M. Influence of N doping on structural and photocatalytic properties of hydrothermally synthesized TiO2/carbon composites: Scientific paper. in Journal of the Serbian Chemical Society. 2023;88(2):183-197.
doi:10.2298/JSC220608079M .

Maletić, Marina, Kalijadis, Ana, Lazović, Vladimir, Trifunović, Snežana S., Babić, Biljana, Dapčević, Aleksandra, Kovač, Janez, Vukčević, Marija, "Influence of N doping on structural and photocatalytic properties of hydrothermally synthesized TiO2/carbon composites: Scientific paper" in Journal of the Serbian Chemical Society, 88, no. 2 (2023):183-197,
https://doi.org/10.2298/JSC220608079M . .

TY  - JOUR
AU  - Stanišić, Marija D.
AU  - Popović Kokar, Nikolina
AU  - Ristić, Predrag
AU  - Balaž, Ana Marija
AU  - Ognjanović, Miloš
AU  - Đokić, Veljko R.
AU  - Prodanović, Radivoje
AU  - Todorović, Tamara
PY  - 2022
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5678
AB  - Many articles in the literature deal with horseradish peroxidase (HRP) biomineralization, but none pay attention to the isoenzyme composition of commercial HRP or the influence of the carbohydrate component of the protein molecule on the biomineralization process. To study the impact of these factors, we performed periodate oxidation of commercial HRP and a purified HRP-C isoform for biomineralization within ZIF-8. With purified HRP, enzyme@ZIF-8 biocomposites with higher activity were obtained, while periodate oxidation of the carbohydrate component of both commercial HRP and purified HRP-C yields biocomposites with very high activity in acetate buffer that does not degrade the ZIF-8 structure. Using acetate instead of phosphate buffer can prevent the false high activity of HRP@ZIF-8 biocomposites caused by the degradation of ZIF-8 coating. At the same time, purification and especially oxidation of the carbohydrate component of enzymes prior to biomineralization lead to significantly improved activity of the biocomposites.
PB  - MDPI
T2  - Polymers
T1  - The Influence of Isoenzyme Composition and Chemical Modification on Horseradish Peroxidase@ZIF-8 Biocomposite Performance
VL  - 14
IS  - 22
SP  - 4834
DO  - 10.3390/polym14224834
ER  - 

@article{
author = "Stanišić, Marija D. and Popović Kokar, Nikolina and Ristić, Predrag and Balaž, Ana Marija and Ognjanović, Miloš and Đokić, Veljko R. and Prodanović, Radivoje and Todorović, Tamara",
year = "2022",
abstract = "Many articles in the literature deal with horseradish peroxidase (HRP) biomineralization, but none pay attention to the isoenzyme composition of commercial HRP or the influence of the carbohydrate component of the protein molecule on the biomineralization process. To study the impact of these factors, we performed periodate oxidation of commercial HRP and a purified HRP-C isoform for biomineralization within ZIF-8. With purified HRP, enzyme@ZIF-8 biocomposites with higher activity were obtained, while periodate oxidation of the carbohydrate component of both commercial HRP and purified HRP-C yields biocomposites with very high activity in acetate buffer that does not degrade the ZIF-8 structure. Using acetate instead of phosphate buffer can prevent the false high activity of HRP@ZIF-8 biocomposites caused by the degradation of ZIF-8 coating. At the same time, purification and especially oxidation of the carbohydrate component of enzymes prior to biomineralization lead to significantly improved activity of the biocomposites.",
publisher = "MDPI",
journal = "Polymers",
title = "The Influence of Isoenzyme Composition and Chemical Modification on Horseradish Peroxidase@ZIF-8 Biocomposite Performance",
volume = "14",
number = "22",
pages = "4834",
doi = "10.3390/polym14224834"
}

Stanišić, M. D., Popović Kokar, N., Ristić, P., Balaž, A. M., Ognjanović, M., Đokić, V. R., Prodanović, R.,& Todorović, T.. (2022). The Influence of Isoenzyme Composition and Chemical Modification on Horseradish Peroxidase@ZIF-8 Biocomposite Performance. in Polymers
MDPI., 14(22), 4834.
https://doi.org/10.3390/polym14224834

Stanišić MD, Popović Kokar N, Ristić P, Balaž AM, Ognjanović M, Đokić VR, Prodanović R, Todorović T. The Influence of Isoenzyme Composition and Chemical Modification on Horseradish Peroxidase@ZIF-8 Biocomposite Performance. in Polymers. 2022;14(22):4834.
doi:10.3390/polym14224834 .

Stanišić, Marija D., Popović Kokar, Nikolina, Ristić, Predrag, Balaž, Ana Marija, Ognjanović, Miloš, Đokić, Veljko R., Prodanović, Radivoje, Todorović, Tamara, "The Influence of Isoenzyme Composition and Chemical Modification on Horseradish Peroxidase@ZIF-8 Biocomposite Performance" in Polymers, 14, no. 22 (2022):4834,
https://doi.org/10.3390/polym14224834 . .

TY  - JOUR
AU  - Radovanović, Lidija
AU  - Malenov, Dušan P.
AU  - Rodić, Marko
AU  - Kremenović, Aleksandar
AU  - Rogan, Jelena
PY  - 2022
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5015
AB  - Orange single crystals of new polymeric cobalt(II) complex {[Co(bipy)(H2O)4]2[Co(μ-mell)(H2O)2 ]·
10H2 O}n, 1, were synthesized by slow evaporation method at room temperature (bipy = 2,2′-bipyridine,
mell = hexaanion of mellitic acid) and its crystal structure was determined by single-crystal X-ray diffrac-
tion. The complex 1 was characterized based on elemental analysis, FTIR spectroscopy and thermal
(TG/DTA) analysis followed by computational analysis of noncovalent interactions and quantum chemical
calculations of interaction energies. In 1, two crystallographically different Co(II) atoms adopt a deformed
octahedral geometry, while bridging mell acts as a tetrakis monodentate ligand allowing the development
of wavy-like anionic chains running along [100] direction. The 3D supramolecular network of 1 is com-
posed of alternating supramolecular and water layers connected by hydrogen bonds. The supramolecular
layer is formed of ionic interactions between complex cations and polymeric complex anions, established
mainly through O–H···O hydrogen bonds, as well as stacking interactions between bipy ligands, while the
water layers are comprised of hydrogen bonded lattice water molecules. Upon heating up to 1200 °C
in nitrogen and air atmosphere, complex 1 showed multiple-step degradation that resulted in the for-
mation of Co and Co3O4, respectively. Computed Hirshfeld surfaces and 2D fingerprint plots indicated
that O–H···O hydrogen bonds are the most dominant in the crystal structure, while the shape index and
curvedness mapped on the Hirshfeld surfaces of 1 revealed that stacking interactions have an important
role in the stabilization of the crystal packing. Quantum chemical calculations showed that, aside from
ionic hydrogen-bonded interaction between cation and anionic polymer, the important role in the sta-
bility of supramolecular structure of 1 is played by hydrogen bonds of cation and anionic polymer with
lattice water, as well as by stacking interactions between bipy ligands.
PB  - Elsevier
T2  - Journal of Molecular Structure
T1  - Crystallographic, spectroscopic, thermal and computational studies of polymeric cobalt(II)–mellitate complex with 2,2′-bipyridine
VL  - 1252
IS  - 132202
DO  - 10.1016/j.molstruc.2021.132202
ER  - 

@article{
author = "Radovanović, Lidija and Malenov, Dušan P. and Rodić, Marko and Kremenović, Aleksandar and Rogan, Jelena",
year = "2022",
abstract = "Orange single crystals of new polymeric cobalt(II) complex {[Co(bipy)(H2O)4]2[Co(μ-mell)(H2O)2 ]·
10H2 O}n, 1, were synthesized by slow evaporation method at room temperature (bipy = 2,2′-bipyridine,
mell = hexaanion of mellitic acid) and its crystal structure was determined by single-crystal X-ray diffrac-
tion. The complex 1 was characterized based on elemental analysis, FTIR spectroscopy and thermal
(TG/DTA) analysis followed by computational analysis of noncovalent interactions and quantum chemical
calculations of interaction energies. In 1, two crystallographically different Co(II) atoms adopt a deformed
octahedral geometry, while bridging mell acts as a tetrakis monodentate ligand allowing the development
of wavy-like anionic chains running along [100] direction. The 3D supramolecular network of 1 is com-
posed of alternating supramolecular and water layers connected by hydrogen bonds. The supramolecular
layer is formed of ionic interactions between complex cations and polymeric complex anions, established
mainly through O–H···O hydrogen bonds, as well as stacking interactions between bipy ligands, while the
water layers are comprised of hydrogen bonded lattice water molecules. Upon heating up to 1200 °C
in nitrogen and air atmosphere, complex 1 showed multiple-step degradation that resulted in the for-
mation of Co and Co3O4, respectively. Computed Hirshfeld surfaces and 2D fingerprint plots indicated
that O–H···O hydrogen bonds are the most dominant in the crystal structure, while the shape index and
curvedness mapped on the Hirshfeld surfaces of 1 revealed that stacking interactions have an important
role in the stabilization of the crystal packing. Quantum chemical calculations showed that, aside from
ionic hydrogen-bonded interaction between cation and anionic polymer, the important role in the sta-
bility of supramolecular structure of 1 is played by hydrogen bonds of cation and anionic polymer with
lattice water, as well as by stacking interactions between bipy ligands.",
publisher = "Elsevier",
journal = "Journal of Molecular Structure",
title = "Crystallographic, spectroscopic, thermal and computational studies of polymeric cobalt(II)–mellitate complex with 2,2′-bipyridine",
volume = "1252",
number = "132202",
doi = "10.1016/j.molstruc.2021.132202"
}

Radovanović, L., Malenov, D. P., Rodić, M., Kremenović, A.,& Rogan, J.. (2022). Crystallographic, spectroscopic, thermal and computational studies of polymeric cobalt(II)–mellitate complex with 2,2′-bipyridine. in Journal of Molecular Structure
Elsevier., 1252(132202).
https://doi.org/10.1016/j.molstruc.2021.132202

Radovanović L, Malenov DP, Rodić M, Kremenović A, Rogan J. Crystallographic, spectroscopic, thermal and computational studies of polymeric cobalt(II)–mellitate complex with 2,2′-bipyridine. in Journal of Molecular Structure. 2022;1252(132202).
doi:10.1016/j.molstruc.2021.132202 .

Radovanović, Lidija, Malenov, Dušan P., Rodić, Marko, Kremenović, Aleksandar, Rogan, Jelena, "Crystallographic, spectroscopic, thermal and computational studies of polymeric cobalt(II)–mellitate complex with 2,2′-bipyridine" in Journal of Molecular Structure, 1252, no. 132202 (2022),
https://doi.org/10.1016/j.molstruc.2021.132202 . .

TY  - DATA
AU  - Radovanović, Lidija
AU  - Malenov, Dušan P.
AU  - Rodić, Marko
AU  - Kremenović, Aleksandar
AU  - Rogan, Jelena
PY  - 2022
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5032
PB  - Elsevier
T2  - Journal of Molecular Structure
T1  - Supplementary data for the article: Radovanović, L.; Malenov, D. P.; Rodić, M. V.; Kremenović, A.; Rogan, J. Crystallographic, Spectroscopic, Thermal and Computational Studies of Polymeric Cobalt(II)–Mellitate Complex with 2,2′-Bipyridine. Journal of Molecular Structure 2022, 1252, 132202. https://doi.org/10.1016/j.molstruc.2021.132202.
UR  - https://hdl.handle.net/21.15107/rcub_cherry_5032
ER  - 

@misc{
author = "Radovanović, Lidija and Malenov, Dušan P. and Rodić, Marko and Kremenović, Aleksandar and Rogan, Jelena",
year = "2022",
publisher = "Elsevier",
journal = "Journal of Molecular Structure",
title = "Supplementary data for the article: Radovanović, L.; Malenov, D. P.; Rodić, M. V.; Kremenović, A.; Rogan, J. Crystallographic, Spectroscopic, Thermal and Computational Studies of Polymeric Cobalt(II)–Mellitate Complex with 2,2′-Bipyridine. Journal of Molecular Structure 2022, 1252, 132202. https://doi.org/10.1016/j.molstruc.2021.132202.",
url = "https://hdl.handle.net/21.15107/rcub_cherry_5032"
}

Radovanović, L., Malenov, D. P., Rodić, M., Kremenović, A.,& Rogan, J.. (2022). Supplementary data for the article: Radovanović, L.; Malenov, D. P.; Rodić, M. V.; Kremenović, A.; Rogan, J. Crystallographic, Spectroscopic, Thermal and Computational Studies of Polymeric Cobalt(II)–Mellitate Complex with 2,2′-Bipyridine. Journal of Molecular Structure 2022, 1252, 132202. https://doi.org/10.1016/j.molstruc.2021.132202.. in Journal of Molecular Structure
Elsevier..
https://hdl.handle.net/21.15107/rcub_cherry_5032

Radovanović L, Malenov DP, Rodić M, Kremenović A, Rogan J. Supplementary data for the article: Radovanović, L.; Malenov, D. P.; Rodić, M. V.; Kremenović, A.; Rogan, J. Crystallographic, Spectroscopic, Thermal and Computational Studies of Polymeric Cobalt(II)–Mellitate Complex with 2,2′-Bipyridine. Journal of Molecular Structure 2022, 1252, 132202. https://doi.org/10.1016/j.molstruc.2021.132202.. in Journal of Molecular Structure. 2022;.
https://hdl.handle.net/21.15107/rcub_cherry_5032 .

Radovanović, Lidija, Malenov, Dušan P., Rodić, Marko, Kremenović, Aleksandar, Rogan, Jelena, "Supplementary data for the article: Radovanović, L.; Malenov, D. P.; Rodić, M. V.; Kremenović, A.; Rogan, J. Crystallographic, Spectroscopic, Thermal and Computational Studies of Polymeric Cobalt(II)–Mellitate Complex with 2,2′-Bipyridine. Journal of Molecular Structure 2022, 1252, 132202. https://doi.org/10.1016/j.molstruc.2021.132202." in Journal of Molecular Structure (2022),
https://hdl.handle.net/21.15107/rcub_cherry_5032 .

TY  - JOUR
AU  - Marković, Maja D.
AU  - Panić, Vesna V.
AU  - Savić, Sanja I.
AU  - Ugrinović, Vukašin Đ.
AU  - Pjanović, Rada V.
AU  - Spasojević, Milica 
AU  - Spasojevic, Pavle M.
PY  - 2022
UR  - https://www.sciencedirect.com/science/article/pii/S1387181122001366?pes=vor
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5148
AB  - Materials sensitive to external stimuli are recognized as safe and effective tool able to respond to specific demands in the therapy of various diseases. Thermo sensitive hydrogels based on poly(N-isopropylacrylamide) (P(NIPAAM)) are widely investigated for targeted drug delivery. Still, the abundance of the stimuli in the human body often requires more than one responsive group able to act simultaneously to achieve optimal therapeutic effects. Due to its pH sensitivity and bio-based production, crotonic acid (CA) was a monomer of choice for preparation of eco-friendly copolymer hydrogels based on NIPAAM and CA (P(NIPAAMcoCA)), which turned to be thermo and pH sensitive at the same time. The potential of the P(NIPAAMcoCA) system for encapsulation and controlled release of drugs with different solubility was investigated engaging water-soluble lidocaine hydrochloride and poorly water-soluble ibuprofen as model drugs. The hydrogels were characterized by various technics: FTIR, DSC, SEM and single compressive tests, while swelling behavior and controlled release of the drugs were analyzed with respect to the CA amount in two environments with different pH values at 25 °C and 37 °C. It was demonstrated that due to their dual responsiveness the P(NIPAAMcoCA) hydrogels have potential for controlled release of drugs with different solubility.
PB  - Elsevier
T2  - Microporous and Mesoporous Materials
T1  - Biobased thermo/pH sensitive poly(N-isopropylacrylamide-co-crotonic acid) hydrogels for targeted drug delivery
VL  - 335
SP  - 111817
DO  - 10.1016/j.micromeso.2022.111817
ER  - 

@article{
author = "Marković, Maja D. and Panić, Vesna V. and Savić, Sanja I. and Ugrinović, Vukašin Đ. and Pjanović, Rada V. and Spasojević, Milica  and Spasojevic, Pavle M.",
year = "2022",
abstract = "Materials sensitive to external stimuli are recognized as safe and effective tool able to respond to specific demands in the therapy of various diseases. Thermo sensitive hydrogels based on poly(N-isopropylacrylamide) (P(NIPAAM)) are widely investigated for targeted drug delivery. Still, the abundance of the stimuli in the human body often requires more than one responsive group able to act simultaneously to achieve optimal therapeutic effects. Due to its pH sensitivity and bio-based production, crotonic acid (CA) was a monomer of choice for preparation of eco-friendly copolymer hydrogels based on NIPAAM and CA (P(NIPAAMcoCA)), which turned to be thermo and pH sensitive at the same time. The potential of the P(NIPAAMcoCA) system for encapsulation and controlled release of drugs with different solubility was investigated engaging water-soluble lidocaine hydrochloride and poorly water-soluble ibuprofen as model drugs. The hydrogels were characterized by various technics: FTIR, DSC, SEM and single compressive tests, while swelling behavior and controlled release of the drugs were analyzed with respect to the CA amount in two environments with different pH values at 25 °C and 37 °C. It was demonstrated that due to their dual responsiveness the P(NIPAAMcoCA) hydrogels have potential for controlled release of drugs with different solubility.",
publisher = "Elsevier",
journal = "Microporous and Mesoporous Materials",
title = "Biobased thermo/pH sensitive poly(N-isopropylacrylamide-co-crotonic acid) hydrogels for targeted drug delivery",
volume = "335",
pages = "111817",
doi = "10.1016/j.micromeso.2022.111817"
}

Marković, M. D., Panić, V. V., Savić, S. I., Ugrinović, V. Đ., Pjanović, R. V., Spasojević, M.,& Spasojevic, P. M.. (2022). Biobased thermo/pH sensitive poly(N-isopropylacrylamide-co-crotonic acid) hydrogels for targeted drug delivery. in Microporous and Mesoporous Materials
Elsevier., 335, 111817.
https://doi.org/10.1016/j.micromeso.2022.111817

Marković MD, Panić VV, Savić SI, Ugrinović VĐ, Pjanović RV, Spasojević M, Spasojevic PM. Biobased thermo/pH sensitive poly(N-isopropylacrylamide-co-crotonic acid) hydrogels for targeted drug delivery. in Microporous and Mesoporous Materials. 2022;335:111817.
doi:10.1016/j.micromeso.2022.111817 .

Marković, Maja D., Panić, Vesna V., Savić, Sanja I., Ugrinović, Vukašin Đ., Pjanović, Rada V., Spasojević, Milica , Spasojevic, Pavle M., "Biobased thermo/pH sensitive poly(N-isopropylacrylamide-co-crotonic acid) hydrogels for targeted drug delivery" in Microporous and Mesoporous Materials, 335 (2022):111817,
https://doi.org/10.1016/j.micromeso.2022.111817 . .

TY  - DATA
AU  - Marković, Maja D.
AU  - Panić, Vesna V.
AU  - Savić, Sanja I.
AU  - Ugrinović, Vukašin Đ.
AU  - Pjanović, Rada V.
AU  - Spasojević, Milica 
AU  - Spasojevic, Pavle M.
PY  - 2022
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5148
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5150
AB  - Materials sensitive to external stimuli are recognized as safe and effective tool able to respond to specific demands in the therapy of various diseases. Thermo sensitive hydrogels based on poly(N-isopropylacrylamide) (P(NIPAAM)) are widely investigated for targeted drug delivery. Still, the abundance of the stimuli in the human body often requires more than one responsive group able to act simultaneously to achieve optimal therapeutic effects. Due to its pH sensitivity and bio-based production, crotonic acid (CA) was a monomer of choice for preparation of eco-friendly copolymer hydrogels based on NIPAAM and CA (P(NIPAAMcoCA)), which turned to be thermo and pH sensitive at the same time. The potential of the P(NIPAAMcoCA) system for encapsulation and controlled release of drugs with different solubility was investigated engaging water-soluble lidocaine hydrochloride and poorly water-soluble ibuprofen as model drugs. The hydrogels were characterized by various technics: FTIR, DSC, SEM and single compressive tests, while swelling behavior and controlled release of the drugs were analyzed with respect to the CA amount in two environments with different pH values at 25 °C and 37 °C. It was demonstrated that due to their dual responsiveness the P(NIPAAMcoCA) hydrogels have potential for controlled release of drugs with different solubility.
PB  - Elsevier
T2  - Microporous and Mesoporous Materials
T1  - Supplementary information for the article: Marković, M. D.; Panić, V. V.; Savić, S. I.; Ugrinović, V. Đ.; Pjanović, R. V.; Spasojević, M. M.; Spasojevic, P. M. Biobased Thermo/PH Sensitive Poly(N-Isopropylacrylamide-Co-Crotonic Acid) Hydrogels for Targeted Drug Delivery. Microporous and Mesoporous Materials 2022, 335. https://doi.org/10.1016.
VL  - 335
UR  - https://hdl.handle.net/21.15107/rcub_cherry_5150
ER  - 

@misc{
author = "Marković, Maja D. and Panić, Vesna V. and Savić, Sanja I. and Ugrinović, Vukašin Đ. and Pjanović, Rada V. and Spasojević, Milica  and Spasojevic, Pavle M.",
year = "2022",
abstract = "Materials sensitive to external stimuli are recognized as safe and effective tool able to respond to specific demands in the therapy of various diseases. Thermo sensitive hydrogels based on poly(N-isopropylacrylamide) (P(NIPAAM)) are widely investigated for targeted drug delivery. Still, the abundance of the stimuli in the human body often requires more than one responsive group able to act simultaneously to achieve optimal therapeutic effects. Due to its pH sensitivity and bio-based production, crotonic acid (CA) was a monomer of choice for preparation of eco-friendly copolymer hydrogels based on NIPAAM and CA (P(NIPAAMcoCA)), which turned to be thermo and pH sensitive at the same time. The potential of the P(NIPAAMcoCA) system for encapsulation and controlled release of drugs with different solubility was investigated engaging water-soluble lidocaine hydrochloride and poorly water-soluble ibuprofen as model drugs. The hydrogels were characterized by various technics: FTIR, DSC, SEM and single compressive tests, while swelling behavior and controlled release of the drugs were analyzed with respect to the CA amount in two environments with different pH values at 25 °C and 37 °C. It was demonstrated that due to their dual responsiveness the P(NIPAAMcoCA) hydrogels have potential for controlled release of drugs with different solubility.",
publisher = "Elsevier",
journal = "Microporous and Mesoporous Materials",
title = "Supplementary information for the article: Marković, M. D.; Panić, V. V.; Savić, S. I.; Ugrinović, V. Đ.; Pjanović, R. V.; Spasojević, M. M.; Spasojevic, P. M. Biobased Thermo/PH Sensitive Poly(N-Isopropylacrylamide-Co-Crotonic Acid) Hydrogels for Targeted Drug Delivery. Microporous and Mesoporous Materials 2022, 335. https://doi.org/10.1016.",
volume = "335",
url = "https://hdl.handle.net/21.15107/rcub_cherry_5150"
}

Marković, M. D., Panić, V. V., Savić, S. I., Ugrinović, V. Đ., Pjanović, R. V., Spasojević, M.,& Spasojevic, P. M.. (2022). Supplementary information for the article: Marković, M. D.; Panić, V. V.; Savić, S. I.; Ugrinović, V. Đ.; Pjanović, R. V.; Spasojević, M. M.; Spasojevic, P. M. Biobased Thermo/PH Sensitive Poly(N-Isopropylacrylamide-Co-Crotonic Acid) Hydrogels for Targeted Drug Delivery. Microporous and Mesoporous Materials 2022, 335. https://doi.org/10.1016.. in Microporous and Mesoporous Materials
Elsevier., 335.
https://hdl.handle.net/21.15107/rcub_cherry_5150

Marković MD, Panić VV, Savić SI, Ugrinović VĐ, Pjanović RV, Spasojević M, Spasojevic PM. Supplementary information for the article: Marković, M. D.; Panić, V. V.; Savić, S. I.; Ugrinović, V. Đ.; Pjanović, R. V.; Spasojević, M. M.; Spasojevic, P. M. Biobased Thermo/PH Sensitive Poly(N-Isopropylacrylamide-Co-Crotonic Acid) Hydrogels for Targeted Drug Delivery. Microporous and Mesoporous Materials 2022, 335. https://doi.org/10.1016.. in Microporous and Mesoporous Materials. 2022;335.
https://hdl.handle.net/21.15107/rcub_cherry_5150 .

Marković, Maja D., Panić, Vesna V., Savić, Sanja I., Ugrinović, Vukašin Đ., Pjanović, Rada V., Spasojević, Milica , Spasojevic, Pavle M., "Supplementary information for the article: Marković, M. D.; Panić, V. V.; Savić, S. I.; Ugrinović, V. Đ.; Pjanović, R. V.; Spasojević, M. M.; Spasojevic, P. M. Biobased Thermo/PH Sensitive Poly(N-Isopropylacrylamide-Co-Crotonic Acid) Hydrogels for Targeted Drug Delivery. Microporous and Mesoporous Materials 2022, 335. https://doi.org/10.1016." in Microporous and Mesoporous Materials, 335 (2022),
https://hdl.handle.net/21.15107/rcub_cherry_5150 .

TY  - JOUR
AU  - Pantić, Olga
AU  - Spasojević, Milica
AU  - Džunuzović, Enis
AU  - Nikolić, Marija S.
AU  - Savić, Sanja
AU  - Marković, Maja
AU  - Spasojević, Pavle M.
PY  - 2022
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/5605
AB  - The scope of the present study was to prepare fully bio-based unsaturated polyester resins (UPRs) with comparable properties to the commercial formulations. The focus was set on the determination of the optimal prepolymer formulation using the same set of diacids (itaconic and succinic acid) and different diols (propylene glycol, isosorbide and neopentyl glycol) or its equimolar mixtures, keeping the fixed molar ratio of 1:1:2.1 in all feed compositions. Instead of commonly used styrene, bio-based dimethyl itaconate was used as a reactive diluent (RD). The rheology of the obtained resins was studied in detail. The effect of the used diol on structural (FTIR), thermal (DSC), thermomechanical (DMA), and mechanical (tensile) properties was explained. The properties of UPRs were found to be highly dependent on the diol used in the prepolymer formulation. The UPR with an equimolar ratio of propylene glycol and neopentyl glycol was shown to be the most promising candidate to compete with the commercial petroleum-based resins.
PB  - MDPI
T2  - Polymers
T1  - The Effect of Glycol Derivatives on the Properties of Bio-Based Unsaturated Polyesters
VL  - 14
IS  - 15
SP  - 2970
DO  - 10.3390/polym14152970
ER  - 

@article{
author = "Pantić, Olga and Spasojević, Milica and Džunuzović, Enis and Nikolić, Marija S. and Savić, Sanja and Marković, Maja and Spasojević, Pavle M.",
year = "2022",
abstract = "The scope of the present study was to prepare fully bio-based unsaturated polyester resins (UPRs) with comparable properties to the commercial formulations. The focus was set on the determination of the optimal prepolymer formulation using the same set of diacids (itaconic and succinic acid) and different diols (propylene glycol, isosorbide and neopentyl glycol) or its equimolar mixtures, keeping the fixed molar ratio of 1:1:2.1 in all feed compositions. Instead of commonly used styrene, bio-based dimethyl itaconate was used as a reactive diluent (RD). The rheology of the obtained resins was studied in detail. The effect of the used diol on structural (FTIR), thermal (DSC), thermomechanical (DMA), and mechanical (tensile) properties was explained. The properties of UPRs were found to be highly dependent on the diol used in the prepolymer formulation. The UPR with an equimolar ratio of propylene glycol and neopentyl glycol was shown to be the most promising candidate to compete with the commercial petroleum-based resins.",
publisher = "MDPI",
journal = "Polymers",
title = "The Effect of Glycol Derivatives on the Properties of Bio-Based Unsaturated Polyesters",
volume = "14",
number = "15",
pages = "2970",
doi = "10.3390/polym14152970"
}

Pantić, O., Spasojević, M., Džunuzović, E., Nikolić, M. S., Savić, S., Marković, M.,& Spasojević, P. M.. (2022). The Effect of Glycol Derivatives on the Properties of Bio-Based Unsaturated Polyesters. in Polymers
MDPI., 14(15), 2970.
https://doi.org/10.3390/polym14152970

Pantić O, Spasojević M, Džunuzović E, Nikolić MS, Savić S, Marković M, Spasojević PM. The Effect of Glycol Derivatives on the Properties of Bio-Based Unsaturated Polyesters. in Polymers. 2022;14(15):2970.
doi:10.3390/polym14152970 .

Pantić, Olga, Spasojević, Milica, Džunuzović, Enis, Nikolić, Marija S., Savić, Sanja, Marković, Maja, Spasojević, Pavle M., "The Effect of Glycol Derivatives on the Properties of Bio-Based Unsaturated Polyesters" in Polymers, 14, no. 15 (2022):2970,
https://doi.org/10.3390/polym14152970 . .

TY  - JOUR
AU  - Korica, Matea
AU  - Peršin, Zdenka
AU  - Zemljič, Lidija Fras
AU  - Mihajlovski, Katarina
AU  - Dojčinović, Biljana P.
AU  - Trifunović, Snežana S.
AU  - Vesel, Alenka
AU  - Nikolić, Tanja
AU  - Kostić, Mirjana M.
PY  - 2021
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/4595
AB  - This research proposed two pretreatments of viscose fabrics: oxidation with 2,2,6,6-tetramethylpiperidine-1-oxy radical (TEMPO) and coating with TEMPO-oxidized cellulose nanofibrils (TOCN), to introduce functional groups (COOH and CHO) suitable for irreversible binding of chitosan nanoparticles without and with embedded zinc (NCS and NCS + Zn, respectively) and consequently achieving washing durable antibacterial properties of the chitosan nanoparticles functionalized fabrics. The characterizations of pretreated and chitosan nanoparticles functionalized fabrics were performed by FTIR and XPS spectroscopy, elemental analysis, inductively coupled plasma optical emission spectrometry, zeta potential measurements, scanning electron microscopy, determination of COOH and CHO groups content, and antimicrobial activity under dynamic contact conditions. Influence of pretreatments on NCS and NCS + Zn adsorption, chemical, electrokinetic, and antibacterial properties as well as morphology, and washing durability of NCS and NCS + Zn functionalized fabrics were studied and compared. Washing durability was evaluated through changes in the chitosan and zinc content, zeta potential, and antibacterial activity after 1, 3, and 5 washing cycles. Pretreatments improved washing durability of antibacterial properties of chitosan nanoparticles functionalized fabrics. The NCS and NCS + Zn functionalized pretreated fabrics preserved antibacterial activity against S. aureus after five washing cycles, while antibacterial activity against E. coli was preserved only after one washing cycle in the case NCS + Zn functionalized pretreated viscose fabrics. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
PB  - MDPI
T2  - Materials
T1  - Chitosan nanoparticles functionalized viscose fabrics as potentially durable antibacterial medical textiles
VL  - 14
IS  - 13
DO  - 10.3390/ma14133762
ER  - 

@article{
author = "Korica, Matea and Peršin, Zdenka and Zemljič, Lidija Fras and Mihajlovski, Katarina and Dojčinović, Biljana P. and Trifunović, Snežana S. and Vesel, Alenka and Nikolić, Tanja and Kostić, Mirjana M.",
year = "2021",
abstract = "This research proposed two pretreatments of viscose fabrics: oxidation with 2,2,6,6-tetramethylpiperidine-1-oxy radical (TEMPO) and coating with TEMPO-oxidized cellulose nanofibrils (TOCN), to introduce functional groups (COOH and CHO) suitable for irreversible binding of chitosan nanoparticles without and with embedded zinc (NCS and NCS + Zn, respectively) and consequently achieving washing durable antibacterial properties of the chitosan nanoparticles functionalized fabrics. The characterizations of pretreated and chitosan nanoparticles functionalized fabrics were performed by FTIR and XPS spectroscopy, elemental analysis, inductively coupled plasma optical emission spectrometry, zeta potential measurements, scanning electron microscopy, determination of COOH and CHO groups content, and antimicrobial activity under dynamic contact conditions. Influence of pretreatments on NCS and NCS + Zn adsorption, chemical, electrokinetic, and antibacterial properties as well as morphology, and washing durability of NCS and NCS + Zn functionalized fabrics were studied and compared. Washing durability was evaluated through changes in the chitosan and zinc content, zeta potential, and antibacterial activity after 1, 3, and 5 washing cycles. Pretreatments improved washing durability of antibacterial properties of chitosan nanoparticles functionalized fabrics. The NCS and NCS + Zn functionalized pretreated fabrics preserved antibacterial activity against S. aureus after five washing cycles, while antibacterial activity against E. coli was preserved only after one washing cycle in the case NCS + Zn functionalized pretreated viscose fabrics. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.",
publisher = "MDPI",
journal = "Materials",
title = "Chitosan nanoparticles functionalized viscose fabrics as potentially durable antibacterial medical textiles",
volume = "14",
number = "13",
doi = "10.3390/ma14133762"
}

Korica, M., Peršin, Z., Zemljič, L. F., Mihajlovski, K., Dojčinović, B. P., Trifunović, S. S., Vesel, A., Nikolić, T.,& Kostić, M. M.. (2021). Chitosan nanoparticles functionalized viscose fabrics as potentially durable antibacterial medical textiles. in Materials
MDPI., 14(13).
https://doi.org/10.3390/ma14133762

Korica M, Peršin Z, Zemljič LF, Mihajlovski K, Dojčinović BP, Trifunović SS, Vesel A, Nikolić T, Kostić MM. Chitosan nanoparticles functionalized viscose fabrics as potentially durable antibacterial medical textiles. in Materials. 2021;14(13).
doi:10.3390/ma14133762 .

Korica, Matea, Peršin, Zdenka, Zemljič, Lidija Fras, Mihajlovski, Katarina, Dojčinović, Biljana P., Trifunović, Snežana S., Vesel, Alenka, Nikolić, Tanja, Kostić, Mirjana M., "Chitosan nanoparticles functionalized viscose fabrics as potentially durable antibacterial medical textiles" in Materials, 14, no. 13 (2021),
https://doi.org/10.3390/ma14133762 . .

TY  - JOUR
AU  - Ivanovska, Aleksandra
AU  - Veljović, Sonja
AU  - Dojčinović, Biljana P.
AU  - Tadić, Nenad
AU  - Mihajlovski, Katarina
AU  - Natić, Maja
AU  - Kostić, Mirjana M.
PY  - 2021
UR  - https://www.hindawi.com/journals/ast/2021/3552300/
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/4663
AB  - In this investigation, the possibility of wood waste (hardwoods such as oaks’ and alternatives’ staves from Balkan cooperage) revalorization for simultaneous cadmium removal and wastewater disinfection was examined. All samples were characterized in terms of their crystallinity index and crystallite size, amount of functional groups, and surface chemistry (determined by ATR-FTIR) as well as antibacterial activity. Mulberry is characterized by the lowest crystallinity index which can be ascribed to the highest crystallite size disabling crystallite denser packaging, while myrobalan plum has about 23% lower crystallite size that enables crystallite better packaging, thus resulting in a 42.4% higher crystallinity index compared to the mulberry. All oaks have a significantly higher amount of carboxyl groups compared to the alternatives (0.23-0.28 vs. 0.12-0.19 mmol/g). The adsorption experiments revealed that with increasing the initial cadmium concentration from 15 up to 55 mg/g, samples’ adsorption capacity increases by 89-220%. The equilibrium data fit well with the Langmuir isotherm model implying monolayer coverage of cadmium ions over a homogeneous wood surface. The relationship between the samples’ maximum adsorption capacities (ranged from 5.726 to 12.618 mg/g), their crystallinity index, and crystallite size was established. According to ATR-FTIR spectra, aldehyde, carboxyl, hydroxyl, and phenyl groups present on the wood waste surface are involved in Cd2+ adsorption which proceeds via the interplay of the complexation, cation-π interactions, and ion-exchange mechanisms. Mulberry and myrobalan plum showed about 89% and 80% of the total uptake capacity of cadmium within 60 min, while the equilibrium was attained after 240 min of contact time. Good compliance with pseudo-second kinetic order indicated that cadmium adsorption was mediated by chemical forces. Thermodynamic parameters revealed the spontaneous and exothermic character of cadmium ion adsorption onto mulberry and myrobalan plum. All studied samples provide maximum bacterial reduction (>99%) for E. coli and S. aureus. Wood waste from Balkan cooperage can be successfully used for simultaneous cadmium removal and wastewater disinfection.
PB  - SAGE
T2  - Adsorption Science & Technology
T1  - A Strategy to Revalue a Wood Waste for Simultaneous Cadmium Removal and Wastewater Disinfection
VL  - 2021
SP  - e3552300
DO  - 10.1155/2021/3552300
ER  - 

@article{
author = "Ivanovska, Aleksandra and Veljović, Sonja and Dojčinović, Biljana P. and Tadić, Nenad and Mihajlovski, Katarina and Natić, Maja and Kostić, Mirjana M.",
year = "2021",
abstract = "In this investigation, the possibility of wood waste (hardwoods such as oaks’ and alternatives’ staves from Balkan cooperage) revalorization for simultaneous cadmium removal and wastewater disinfection was examined. All samples were characterized in terms of their crystallinity index and crystallite size, amount of functional groups, and surface chemistry (determined by ATR-FTIR) as well as antibacterial activity. Mulberry is characterized by the lowest crystallinity index which can be ascribed to the highest crystallite size disabling crystallite denser packaging, while myrobalan plum has about 23% lower crystallite size that enables crystallite better packaging, thus resulting in a 42.4% higher crystallinity index compared to the mulberry. All oaks have a significantly higher amount of carboxyl groups compared to the alternatives (0.23-0.28 vs. 0.12-0.19 mmol/g). The adsorption experiments revealed that with increasing the initial cadmium concentration from 15 up to 55 mg/g, samples’ adsorption capacity increases by 89-220%. The equilibrium data fit well with the Langmuir isotherm model implying monolayer coverage of cadmium ions over a homogeneous wood surface. The relationship between the samples’ maximum adsorption capacities (ranged from 5.726 to 12.618 mg/g), their crystallinity index, and crystallite size was established. According to ATR-FTIR spectra, aldehyde, carboxyl, hydroxyl, and phenyl groups present on the wood waste surface are involved in Cd2+ adsorption which proceeds via the interplay of the complexation, cation-π interactions, and ion-exchange mechanisms. Mulberry and myrobalan plum showed about 89% and 80% of the total uptake capacity of cadmium within 60 min, while the equilibrium was attained after 240 min of contact time. Good compliance with pseudo-second kinetic order indicated that cadmium adsorption was mediated by chemical forces. Thermodynamic parameters revealed the spontaneous and exothermic character of cadmium ion adsorption onto mulberry and myrobalan plum. All studied samples provide maximum bacterial reduction (>99%) for E. coli and S. aureus. Wood waste from Balkan cooperage can be successfully used for simultaneous cadmium removal and wastewater disinfection.",
publisher = "SAGE",
journal = "Adsorption Science & Technology",
title = "A Strategy to Revalue a Wood Waste for Simultaneous Cadmium Removal and Wastewater Disinfection",
volume = "2021",
pages = "e3552300",
doi = "10.1155/2021/3552300"
}

Ivanovska, A., Veljović, S., Dojčinović, B. P., Tadić, N., Mihajlovski, K., Natić, M.,& Kostić, M. M.. (2021). A Strategy to Revalue a Wood Waste for Simultaneous Cadmium Removal and Wastewater Disinfection. in Adsorption Science & Technology
SAGE., 2021, e3552300.
https://doi.org/10.1155/2021/3552300

Ivanovska A, Veljović S, Dojčinović BP, Tadić N, Mihajlovski K, Natić M, Kostić MM. A Strategy to Revalue a Wood Waste for Simultaneous Cadmium Removal and Wastewater Disinfection. in Adsorption Science & Technology. 2021;2021:e3552300.
doi:10.1155/2021/3552300 .

Ivanovska, Aleksandra, Veljović, Sonja, Dojčinović, Biljana P., Tadić, Nenad, Mihajlovski, Katarina, Natić, Maja, Kostić, Mirjana M., "A Strategy to Revalue a Wood Waste for Simultaneous Cadmium Removal and Wastewater Disinfection" in Adsorption Science & Technology, 2021 (2021):e3552300,
https://doi.org/10.1155/2021/3552300 . .

TY  - JOUR
AU  - Ivanovska, Aleksandra
AU  - Lađarević, Jelena
AU  - Pavun, Leposava
AU  - Dojčinović, Biljana P.
AU  - Cvijetić, Ilija
AU  - Mijin, Dušan
AU  - Kostić, Mirjana M.
PY  - 2021
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/4744
AB  - The objective of this investigation was to obtain jute fabrics with enhanced sorption properties (by using simple and cost-effective alkali and oxidative modifications) and a long life cycle. The applied alkali modifications lead to hemicellulose removal and decreased the fibers’ crystallinity, both contributing to enhanced fibers’ sorption properties, i.e., water retention power and degree of fibers’ swelling up to 49 % and 70 %, respectively. A connection between cellulose polymorphs’ (cellulose I and cellulose II) contents (determined by XRD), fibers’ surface morphology (verified by FESEM), fabrics’ crimp, and capillarity of jute fabrics modified with 17.5 % NaOH was established. During the oxidative modifications, significant changes in jute fibers’ chemical composition and structure (i.e., lignin removal and more homogeneous middle lamellae) occurred which further resulted in enhanced jute fabrics’ water retention power and capillarity as well as fibers’ swelling up to 80 %, 75 %, and 54 %, compared to the raw jute, respectively. In order to move towards a circular economy and to ensure the recycling and re-use of recycled fabrics, the jute fabrics with enhanced sorption properties were evaluated as biosorbents for anthraquinone dye C. I. Acid Blue 111. The obtained results revealed that the jute fabrics’ maximum biosorption capacities for this dye ranged from 12.94 to 18.97 mg/g, while the equilibrium adsorption data were highly consistent with the Langmuir isotherm model. Moreover, based on the predicted dye pKa values, the fabric zeta potential, content of carboxyl and aldehyde groups as well as hydrogen bond intensity (determined by ATR-FTIR), a possible mechanism of the dye biosorption onto jute fabric waste was proposed.
PB  - Elsevier
T2  - Industrial Crops and Products
T1  - Obtaining jute fabrics with enhanced sorption properties and “closing the loop” of their lifecycle
VL  - 171
SP  - 113913
DO  - 10.1016/j.indcrop.2021.113913
ER  - 

@article{
author = "Ivanovska, Aleksandra and Lađarević, Jelena and Pavun, Leposava and Dojčinović, Biljana P. and Cvijetić, Ilija and Mijin, Dušan and Kostić, Mirjana M.",
year = "2021",
abstract = "The objective of this investigation was to obtain jute fabrics with enhanced sorption properties (by using simple and cost-effective alkali and oxidative modifications) and a long life cycle. The applied alkali modifications lead to hemicellulose removal and decreased the fibers’ crystallinity, both contributing to enhanced fibers’ sorption properties, i.e., water retention power and degree of fibers’ swelling up to 49 % and 70 %, respectively. A connection between cellulose polymorphs’ (cellulose I and cellulose II) contents (determined by XRD), fibers’ surface morphology (verified by FESEM), fabrics’ crimp, and capillarity of jute fabrics modified with 17.5 % NaOH was established. During the oxidative modifications, significant changes in jute fibers’ chemical composition and structure (i.e., lignin removal and more homogeneous middle lamellae) occurred which further resulted in enhanced jute fabrics’ water retention power and capillarity as well as fibers’ swelling up to 80 %, 75 %, and 54 %, compared to the raw jute, respectively. In order to move towards a circular economy and to ensure the recycling and re-use of recycled fabrics, the jute fabrics with enhanced sorption properties were evaluated as biosorbents for anthraquinone dye C. I. Acid Blue 111. The obtained results revealed that the jute fabrics’ maximum biosorption capacities for this dye ranged from 12.94 to 18.97 mg/g, while the equilibrium adsorption data were highly consistent with the Langmuir isotherm model. Moreover, based on the predicted dye pKa values, the fabric zeta potential, content of carboxyl and aldehyde groups as well as hydrogen bond intensity (determined by ATR-FTIR), a possible mechanism of the dye biosorption onto jute fabric waste was proposed.",
publisher = "Elsevier",
journal = "Industrial Crops and Products",
title = "Obtaining jute fabrics with enhanced sorption properties and “closing the loop” of their lifecycle",
volume = "171",
pages = "113913",
doi = "10.1016/j.indcrop.2021.113913"
}

Ivanovska, A., Lađarević, J., Pavun, L., Dojčinović, B. P., Cvijetić, I., Mijin, D.,& Kostić, M. M.. (2021). Obtaining jute fabrics with enhanced sorption properties and “closing the loop” of their lifecycle. in Industrial Crops and Products
Elsevier., 171, 113913.
https://doi.org/10.1016/j.indcrop.2021.113913

Ivanovska A, Lađarević J, Pavun L, Dojčinović BP, Cvijetić I, Mijin D, Kostić MM. Obtaining jute fabrics with enhanced sorption properties and “closing the loop” of their lifecycle. in Industrial Crops and Products. 2021;171:113913.
doi:10.1016/j.indcrop.2021.113913 .

Ivanovska, Aleksandra, Lađarević, Jelena, Pavun, Leposava, Dojčinović, Biljana P., Cvijetić, Ilija, Mijin, Dušan, Kostić, Mirjana M., "Obtaining jute fabrics with enhanced sorption properties and “closing the loop” of their lifecycle" in Industrial Crops and Products, 171 (2021):113913,
https://doi.org/10.1016/j.indcrop.2021.113913 . .

TY  - DATA
AU  - Ivanovska, Aleksandra
AU  - Lađarević, Jelena
AU  - Pavun, Leposava
AU  - Dojčinović, Biljana P.
AU  - Cvijetić, Ilija
AU  - Mijin, Dušan
AU  - Kostić, Mirjana M.
PY  - 2021
UR  - https://cherry.chem.bg.ac.rs/handle/123456789/4745
PB  - Elsevier
T2  - Industrial Crops and Products
T1  - Supplementary data for the article: Ivanovska, A.; Lađarević, J.; Pavun, L.; Dojčinović, B.; Cvijetić, I.; Mijin, D.; Kostić, M. Obtaining Jute Fabrics with Enhanced Sorption Properties and “Closing the Loop” of Their Lifecycle. Industrial Crops and Products 2021, 171, 113913. https://doi.org/10.1016/j.indcrop.2021.113913.
UR  - https://hdl.handle.net/21.15107/rcub_cherry_4745
ER  - 

@misc{
author = "Ivanovska, Aleksandra and Lađarević, Jelena and Pavun, Leposava and Dojčinović, Biljana P. and Cvijetić, Ilija and Mijin, Dušan and Kostić, Mirjana M.",
year = "2021",
publisher = "Elsevier",
journal = "Industrial Crops and Products",
title = "Supplementary data for the article: Ivanovska, A.; Lađarević, J.; Pavun, L.; Dojčinović, B.; Cvijetić, I.; Mijin, D.; Kostić, M. Obtaining Jute Fabrics with Enhanced Sorption Properties and “Closing the Loop” of Their Lifecycle. Industrial Crops and Products 2021, 171, 113913. https://doi.org/10.1016/j.indcrop.2021.113913.",
url = "https://hdl.handle.net/21.15107/rcub_cherry_4745"
}

Ivanovska, A., Lađarević, J., Pavun, L., Dojčinović, B. P., Cvijetić, I., Mijin, D.,& Kostić, M. M.. (2021). Supplementary data for the article: Ivanovska, A.; Lađarević, J.; Pavun, L.; Dojčinović, B.; Cvijetić, I.; Mijin, D.; Kostić, M. Obtaining Jute Fabrics with Enhanced Sorption Properties and “Closing the Loop” of Their Lifecycle. Industrial Crops and Products 2021, 171, 113913. https://doi.org/10.1016/j.indcrop.2021.113913.. in Industrial Crops and Products
Elsevier..
https://hdl.handle.net/21.15107/rcub_cherry_4745

Ivanovska A, Lađarević J, Pavun L, Dojčinović BP, Cvijetić I, Mijin D, Kostić MM. Supplementary data for the article: Ivanovska, A.; Lađarević, J.; Pavun, L.; Dojčinović, B.; Cvijetić, I.; Mijin, D.; Kostić, M. Obtaining Jute Fabrics with Enhanced Sorption Properties and “Closing the Loop” of Their Lifecycle. Industrial Crops and Products 2021, 171, 113913. https://doi.org/10.1016/j.indcrop.2021.113913.. in Industrial Crops and Products. 2021;.
https://hdl.handle.net/21.15107/rcub_cherry_4745 .

Ivanovska, Aleksandra, Lađarević, Jelena, Pavun, Leposava, Dojčinović, Biljana P., Cvijetić, Ilija, Mijin, Dušan, Kostić, Mirjana M., "Supplementary data for the article: Ivanovska, A.; Lađarević, J.; Pavun, L.; Dojčinović, B.; Cvijetić, I.; Mijin, D.; Kostić, M. Obtaining Jute Fabrics with Enhanced Sorption Properties and “Closing the Loop” of Their Lifecycle. Industrial Crops and Products 2021, 171, 113913. https://doi.org/10.1016/j.indcrop.2021.113913." in Industrial Crops and Products (2021),
https://hdl.handle.net/21.15107/rcub_cherry_4745 .

TY  - CONF
AU  - Manojlović, Vaso
AU  - Kamberović, Željko
AU  - Jevtić, Sanja O.
AU  - Gajić, Nataša
AU  - Ranitović, Milisav
AU  - Milošević, Anđela
AU  - Đokić, Jovana
PY  - 2021
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6297
AB  - In the hydrometallurgical process for getting the zine, after acid leaching, zinc-ferric sludge as the byproduct is further treated in the so-called jarosite procedure In the jarosite procedure, Pb and Ag are valorized, and Fe is removed through the residue. Besides Fe, in the jarosite residue, the other impurities are present (2n. Cu Ni, Cr, Co, As, Cd, Pb, 5b, Ge, Ga, In) which could be mobile in the environment causing the hazardous consequences [11]. The main goal of our research is to determine the activation energy of the decomposition of jarosite using thermogravimetry analysis. The thermogravimetric curve (IG) shows three segments, which indicate that the degradation of jarosite occurs in three steps. Below 200 °C, mass loss is 1.1%, due to adsorbed water evaporation. At an interval of 285-440 °C (with DTG maximum at 418 °C) deammonicifiation and dehydroxylation occurred. Also, structural water is released above 390 °C, so that three reactions occur simultaneously in this temperature range - which justifies the high activation energy on a - 0.3 and temperature of 420 °C (Figure b, c). Jarosite decomposed into ferrous sulfate and hematite with a weight loss of 22.6%. The mass loss in the range 520 to 750 °C (DTG maximum at 625 °C) is attributed to the loss of sulfate as $Oz. Two minima (420.1 and 625.9 °C) are observed on the DSC curve, which indicates that the process of jarosite decomposition is endothermic. The Fell could oxidize from intermediate phases, which is favorable to get Fe(ILD) that will later precipitate in the water. For kinetic analysis, we used Kissinger-Akahira Sunose (KAS) integral isoconversional method for the determination of Ea. The energy of activation changes with conversion, a, and the average value is 235.4 kJ/mol - which is higher than the literature 197.7 kJ/mol [2]; this is expected due to the complexity in the chemical composition of industrial jarosite residue.
PB  - Kosovska Mitrovica : Fakultet tehničkih nauka
C3  - Deseti simpozijum o termodinamici i faznim dijagramima
T1  - Isoconversional analysis of jarosite residue thermal decomposition
UR  - https://hdl.handle.net/21.15107/rcub_cherry_6297
ER  - 

@conference{
author = "Manojlović, Vaso and Kamberović, Željko and Jevtić, Sanja O. and Gajić, Nataša and Ranitović, Milisav and Milošević, Anđela and Đokić, Jovana",
year = "2021",
abstract = "In the hydrometallurgical process for getting the zine, after acid leaching, zinc-ferric sludge as the byproduct is further treated in the so-called jarosite procedure In the jarosite procedure, Pb and Ag are valorized, and Fe is removed through the residue. Besides Fe, in the jarosite residue, the other impurities are present (2n. Cu Ni, Cr, Co, As, Cd, Pb, 5b, Ge, Ga, In) which could be mobile in the environment causing the hazardous consequences [11]. The main goal of our research is to determine the activation energy of the decomposition of jarosite using thermogravimetry analysis. The thermogravimetric curve (IG) shows three segments, which indicate that the degradation of jarosite occurs in three steps. Below 200 °C, mass loss is 1.1%, due to adsorbed water evaporation. At an interval of 285-440 °C (with DTG maximum at 418 °C) deammonicifiation and dehydroxylation occurred. Also, structural water is released above 390 °C, so that three reactions occur simultaneously in this temperature range - which justifies the high activation energy on a - 0.3 and temperature of 420 °C (Figure b, c). Jarosite decomposed into ferrous sulfate and hematite with a weight loss of 22.6%. The mass loss in the range 520 to 750 °C (DTG maximum at 625 °C) is attributed to the loss of sulfate as $Oz. Two minima (420.1 and 625.9 °C) are observed on the DSC curve, which indicates that the process of jarosite decomposition is endothermic. The Fell could oxidize from intermediate phases, which is favorable to get Fe(ILD) that will later precipitate in the water. For kinetic analysis, we used Kissinger-Akahira Sunose (KAS) integral isoconversional method for the determination of Ea. The energy of activation changes with conversion, a, and the average value is 235.4 kJ/mol - which is higher than the literature 197.7 kJ/mol [2]; this is expected due to the complexity in the chemical composition of industrial jarosite residue.",
publisher = "Kosovska Mitrovica : Fakultet tehničkih nauka",
journal = "Deseti simpozijum o termodinamici i faznim dijagramima",
title = "Isoconversional analysis of jarosite residue thermal decomposition",
url = "https://hdl.handle.net/21.15107/rcub_cherry_6297"
}

Manojlović, V., Kamberović, Ž., Jevtić, S. O., Gajić, N., Ranitović, M., Milošević, A.,& Đokić, J.. (2021). Isoconversional analysis of jarosite residue thermal decomposition. in Deseti simpozijum o termodinamici i faznim dijagramima
Kosovska Mitrovica : Fakultet tehničkih nauka..
https://hdl.handle.net/21.15107/rcub_cherry_6297

Manojlović V, Kamberović Ž, Jevtić SO, Gajić N, Ranitović M, Milošević A, Đokić J. Isoconversional analysis of jarosite residue thermal decomposition. in Deseti simpozijum o termodinamici i faznim dijagramima. 2021;.
https://hdl.handle.net/21.15107/rcub_cherry_6297 .

Manojlović, Vaso, Kamberović, Željko, Jevtić, Sanja O., Gajić, Nataša, Ranitović, Milisav, Milošević, Anđela, Đokić, Jovana, "Isoconversional analysis of jarosite residue thermal decomposition" in Deseti simpozijum o termodinamici i faznim dijagramima (2021),
https://hdl.handle.net/21.15107/rcub_cherry_6297 .

TY  - CONF
AU  - Gajić, Nataša
AU  - Kamberović, Željko
AU  - Ranitović, Milisav
AU  - Milošević, Anđela
AU  - Manojlović, Vaso
AU  - Jevtić, Sanja O.
AU  - Đokić, Jovana
PY  - 2021
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/6296
AB  - Jarosite waste is classified as hazardous one. It contains toxic elements (Cd, As, Hg) with strong leaching toxicity and metal mobility. Nevertheless, jarosite waste is usually landfilled which have an adverse impact on the environment and human health. In addition, jarosite waste contains significant amounts of the base (Fe, Zn, Pb. Cu), critical (In, Ge, Ga), and precious metals (Au, Ag) which should not be discarded but recovered [1]. This paper presents thermodynamic modelling of roasting of non-standard Pb/Ag Jarosite. This approach enables the determination of optimal process conditions for product formation with required phase composition, and thus valorizations of valuable metals. Thermodynamic data for the detailed analysis of roasting were calculated using HSC Chemistry Software v. 9.9.2.3 [2]. The main objectives were the determination of the temperature effect and ratio of input material vs. sulphating and oxidizing agent on the formation of the required roasting product phase composition. To determine the stability of the roasting product compounds, modelling of the phase stability diagrams was done.
The change of the standard Gibbs free energy (ΔrG°) versus the temperature of analyzed transformation reactions the examined system suggests thermodynamical possibility at a temperature higher than 700 °C. Also, the results of thermodynamic calculations, within the equilibrium composition model, showed that the maximum content of hematite, and metal sulphates (Cu, Pb and Zn), as required product compounds, can be obtained within the temperature range of 700-750 °C. Phase stability modelling confirmed formation of the mentioned phases When logarithmic partial pressure of oxygen and sulphur is - 4.5 bar and -20.0 bar, respectively.
PB  - Kosovska Mitrovica : Fakultet tehničkih nauka
C3  - Deseti simpozijum o termodinamici i faznim dijagramima
T1  - Thermodynamic modelling of the roasting process of the nonstandard Pb/Ag Jarosite
UR  - https://hdl.handle.net/21.15107/rcub_cherry_6296
ER  - 

@conference{
author = "Gajić, Nataša and Kamberović, Željko and Ranitović, Milisav and Milošević, Anđela and Manojlović, Vaso and Jevtić, Sanja O. and Đokić, Jovana",
year = "2021",
abstract = "Jarosite waste is classified as hazardous one. It contains toxic elements (Cd, As, Hg) with strong leaching toxicity and metal mobility. Nevertheless, jarosite waste is usually landfilled which have an adverse impact on the environment and human health. In addition, jarosite waste contains significant amounts of the base (Fe, Zn, Pb. Cu), critical (In, Ge, Ga), and precious metals (Au, Ag) which should not be discarded but recovered [1]. This paper presents thermodynamic modelling of roasting of non-standard Pb/Ag Jarosite. This approach enables the determination of optimal process conditions for product formation with required phase composition, and thus valorizations of valuable metals. Thermodynamic data for the detailed analysis of roasting were calculated using HSC Chemistry Software v. 9.9.2.3 [2]. The main objectives were the determination of the temperature effect and ratio of input material vs. sulphating and oxidizing agent on the formation of the required roasting product phase composition. To determine the stability of the roasting product compounds, modelling of the phase stability diagrams was done.
The change of the standard Gibbs free energy (ΔrG°) versus the temperature of analyzed transformation reactions the examined system suggests thermodynamical possibility at a temperature higher than 700 °C. Also, the results of thermodynamic calculations, within the equilibrium composition model, showed that the maximum content of hematite, and metal sulphates (Cu, Pb and Zn), as required product compounds, can be obtained within the temperature range of 700-750 °C. Phase stability modelling confirmed formation of the mentioned phases When logarithmic partial pressure of oxygen and sulphur is - 4.5 bar and -20.0 bar, respectively.",
publisher = "Kosovska Mitrovica : Fakultet tehničkih nauka",
journal = "Deseti simpozijum o termodinamici i faznim dijagramima",
title = "Thermodynamic modelling of the roasting process of the nonstandard Pb/Ag Jarosite",
url = "https://hdl.handle.net/21.15107/rcub_cherry_6296"
}

Gajić, N., Kamberović, Ž., Ranitović, M., Milošević, A., Manojlović, V., Jevtić, S. O.,& Đokić, J.. (2021). Thermodynamic modelling of the roasting process of the nonstandard Pb/Ag Jarosite. in Deseti simpozijum o termodinamici i faznim dijagramima
Kosovska Mitrovica : Fakultet tehničkih nauka..
https://hdl.handle.net/21.15107/rcub_cherry_6296

Gajić N, Kamberović Ž, Ranitović M, Milošević A, Manojlović V, Jevtić SO, Đokić J. Thermodynamic modelling of the roasting process of the nonstandard Pb/Ag Jarosite. in Deseti simpozijum o termodinamici i faznim dijagramima. 2021;.
https://hdl.handle.net/21.15107/rcub_cherry_6296 .

Gajić, Nataša, Kamberović, Željko, Ranitović, Milisav, Milošević, Anđela, Manojlović, Vaso, Jevtić, Sanja O., Đokić, Jovana, "Thermodynamic modelling of the roasting process of the nonstandard Pb/Ag Jarosite" in Deseti simpozijum o termodinamici i faznim dijagramima (2021),
https://hdl.handle.net/21.15107/rcub_cherry_6296 .

TY  - CONF
AU  - Stefanović, M.
AU  - Jovančićević, Branimir
AU  - Šajnović, Aleksandra
AU  - Gallart, F.
AU  - Moreno-de las Heras, M.
AU  - Antić, N.
AU  - Kašanin-Grubin, Milica
PY  - 2021
UR  - http://cherry.chem.bg.ac.rs/handle/123456789/4908
AB  - Badlands are areas with limited vegetation, reduced or no human activity, and a great variety of geomorphic processes [1]. Badland materials have a different responsetothe same environmental conditions, because of differences in their mineralogical and physico-chemical characteristics. Many studies show that smectite-poorsediments are more resistant to different weathering treatments of freezing, thawing, wetting, and drying,than smectite-rich materials [2,3].In this paper, three unweathered samples of badlands from Spain were analyzed with the aim of monitoring, but also comparing physico-chemical changes caused by simulations of changes in climatic conditions. Selectedsediment samples havedifferent compositions. Besides quartz and calcite, the first sampleis composed of smectite and gypsum (3 UW), the second of smectite (4 UW), while the third sample is composed of neither smectite nor gypsum (5 UW). The experiment setup was designed in the way that each sample had three sub-samples, a sample for simulation of rain, snow, and a control sample (Figure 1). Sample_rain was treated with a rain intensity of ~850 ml/h for 10 minutes (~140 ml), while sample_snow was treated with crushed ice (~150 g). After precipitation simulations snow were put samples were placed in a climate chamber at - 3 °C together with a control sample. This was repeated for 15 cycles. Every cycle was documented with photographs. The leached solution was collected and its volume, pH, electrical conductivity (EC), and ion concentrations were measured. The second part of the experiment was based on exposing the samples after wetting to higher temperatures, 50 ° C. It was done in 8 cycles. FESEM and BET analyzes were performed for each sample before and after the experiments.The 3 UW samples had significantly different leachate pH and EC, while the leachate volume was similar for all samples during the experiment. Sulphate ions were leached in the highest concentrations during the whole experiment from the sample with both smectite and gypsum present. The sample with smectite has shown the highest disintegration of the structure, especially after the simulation of snow. The sample with smectite and gypsum has shown a lower degree of degradation than sample 3 UW due to the content of gypsum which increases the weathering resistance of the material. Sample 5 UW has shown the lowest degradation of the structure along with the weathering cycles. This study has proven that both mineralogical and physico-chemical properties of sediments are important for predicting their response to variable climate factors.
PB  - Belgrade : Serbian Chemical Society
C3  - Book of Abstracts 21st; European Meeting on Environmental Chemistry
T1  - The Response of Badland Materials from Spain with Different Mineralogical Content on Seasonal Changes
SP  - 52
EP  - 52
UR  - https://hdl.handle.net/21.15107/rcub_cherry_4908
ER  - 

@conference{
author = "Stefanović, M. and Jovančićević, Branimir and Šajnović, Aleksandra and Gallart, F. and Moreno-de las Heras, M. and Antić, N. and Kašanin-Grubin, Milica",
year = "2021",
abstract = "Badlands are areas with limited vegetation, reduced or no human activity, and a great variety of geomorphic processes [1]. Badland materials have a different responsetothe same environmental conditions, because of differences in their mineralogical and physico-chemical characteristics. Many studies show that smectite-poorsediments are more resistant to different weathering treatments of freezing, thawing, wetting, and drying,than smectite-rich materials [2,3].In this paper, three unweathered samples of badlands from Spain were analyzed with the aim of monitoring, but also comparing physico-chemical changes caused by simulations of changes in climatic conditions. Selectedsediment samples havedifferent compositions. Besides quartz and calcite, the first sampleis composed of smectite and gypsum (3 UW), the second of smectite (4 UW), while the third sample is composed of neither smectite nor gypsum (5 UW). The experiment setup was designed in the way that each sample had three sub-samples, a sample for simulation of rain, snow, and a control sample (Figure 1). Sample_rain was treated with a rain intensity of ~850 ml/h for 10 minutes (~140 ml), while sample_snow was treated with crushed ice (~150 g). After precipitation simulations snow were put samples were placed in a climate chamber at - 3 °C together with a control sample. This was repeated for 15 cycles. Every cycle was documented with photographs. The leached solution was collected and its volume, pH, electrical conductivity (EC), and ion concentrations were measured. The second part of the experiment was based on exposing the samples after wetting to higher temperatures, 50 ° C. It was done in 8 cycles. FESEM and BET analyzes were performed for each sample before and after the experiments.The 3 UW samples had significantly different leachate pH and EC, while the leachate volume was similar for all samples during the experiment. Sulphate ions were leached in the highest concentrations during the whole experiment from the sample with both smectite and gypsum present. The sample with smectite has shown the highest disintegration of the structure, especially after the simulation of snow. The sample with smectite and gypsum has shown a lower degree of degradation than sample 3 UW due to the content of gypsum which increases the weathering resistance of the material. Sample 5 UW has shown the lowest degradation of the structure along with the weathering cycles. This study has proven that both mineralogical and physico-chemical properties of sediments are important for predicting their response to variable climate factors.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "Book of Abstracts 21st; European Meeting on Environmental Chemistry",
title = "The Response of Badland Materials from Spain with Different Mineralogical Content on Seasonal Changes",
pages = "52-52",
url = "https://hdl.handle.net/21.15107/rcub_cherry_4908"
}

Stefanović, M., Jovančićević, B., Šajnović, A., Gallart, F., Moreno-de las Heras, M., Antić, N.,& Kašanin-Grubin, M.. (2021). The Response of Badland Materials from Spain with Different Mineralogical Content on Seasonal Changes. in Book of Abstracts 21st; European Meeting on Environmental Chemistry
Belgrade : Serbian Chemical Society., 52-52.
https://hdl.handle.net/21.15107/rcub_cherry_4908

Stefanović M, Jovančićević B, Šajnović A, Gallart F, Moreno-de las Heras M, Antić N, Kašanin-Grubin M. The Response of Badland Materials from Spain with Different Mineralogical Content on Seasonal Changes. in Book of Abstracts 21st; European Meeting on Environmental Chemistry. 2021;:52-52.
https://hdl.handle.net/21.15107/rcub_cherry_4908 .

Stefanović, M., Jovančićević, Branimir, Šajnović, Aleksandra, Gallart, F., Moreno-de las Heras, M., Antić, N., Kašanin-Grubin, Milica, "The Response of Badland Materials from Spain with Different Mineralogical Content on Seasonal Changes" in Book of Abstracts 21st; European Meeting on Environmental Chemistry (2021):52-52,
https://hdl.handle.net/21.15107/rcub_cherry_4908 .