Synthesis of tribological WS 2 powder from WO 3 prepared by ultrasonic spray pyrolysis (USP)
Аутори
Gajić, NatašaKamberović, Željko
Anđić, Zoran
Trpčevská, Jarmila
Plešingerova, Beatrice
Korać, Marija
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper describes the synthesis of tungsten disulfide (WS 2 ) powder by the sulfurization of tungsten trioxide (WO 3 ) particles in the presence of additive potassium carbonate (K 2 CO 3 ) in nitrogen (N 2 ) atmosphere, first at lower temperature (200 ◦ C) and followed by reduction at higher temperature (900 ◦ C). In addition, the ultrasonic spray pyrolysis of ammonium meta-tungstate hydrate (AMT) was used for the production of WO 3 particles at 650 ◦ C in air. The HSC Chemistry® software package 9.0 was used for the analysis of chemistry and thermodynamic parameters of the processes for WS 2 powder synthesis. The crystalline structure and phase composition of all synthesized powders were analyzed by X-ray diffraction (XRD) measurements. The morphology and chemical composition of these samples were examined by scanning electron microscopy (SEM) combined with energy dispersive X-ray analysis (EDX).
Кључне речи:
Tribology materials / Tungsten disulfide / Tungsten trioxide / Ultrasonic spray pyrolysisИзвор:
Metals, 2019, 9, 3, 1-15Издавач:
- MDPI
Финансирање / пројекти:
- Иновативна синергија нус-продуката, минимизације отпада и чистије производње у металургији (RS-MESTD-Technological Development (TD or TR)-34033)
DOI: 10.3390/met9030277
ISSN: 2075-4701
WoS: 000464288600001
Scopus: 2-s2.0-85063374905
Колекције
Институција/група
Inovacioni centar / Innovation CentreTY - JOUR AU - Gajić, Nataša AU - Kamberović, Željko AU - Anđić, Zoran AU - Trpčevská, Jarmila AU - Plešingerova, Beatrice AU - Korać, Marija PY - 2019 UR - https://cherry.chem.bg.ac.rs/handle/123456789/2868 AB - This paper describes the synthesis of tungsten disulfide (WS 2 ) powder by the sulfurization of tungsten trioxide (WO 3 ) particles in the presence of additive potassium carbonate (K 2 CO 3 ) in nitrogen (N 2 ) atmosphere, first at lower temperature (200 ◦ C) and followed by reduction at higher temperature (900 ◦ C). In addition, the ultrasonic spray pyrolysis of ammonium meta-tungstate hydrate (AMT) was used for the production of WO 3 particles at 650 ◦ C in air. The HSC Chemistry® software package 9.0 was used for the analysis of chemistry and thermodynamic parameters of the processes for WS 2 powder synthesis. The crystalline structure and phase composition of all synthesized powders were analyzed by X-ray diffraction (XRD) measurements. The morphology and chemical composition of these samples were examined by scanning electron microscopy (SEM) combined with energy dispersive X-ray analysis (EDX). PB - MDPI T2 - Metals T1 - Synthesis of tribological WS 2 powder from WO 3 prepared by ultrasonic spray pyrolysis (USP) VL - 9 IS - 3 SP - 1 EP - 15 DO - 10.3390/met9030277 ER -
@article{ author = "Gajić, Nataša and Kamberović, Željko and Anđić, Zoran and Trpčevská, Jarmila and Plešingerova, Beatrice and Korać, Marija", year = "2019", abstract = "This paper describes the synthesis of tungsten disulfide (WS 2 ) powder by the sulfurization of tungsten trioxide (WO 3 ) particles in the presence of additive potassium carbonate (K 2 CO 3 ) in nitrogen (N 2 ) atmosphere, first at lower temperature (200 ◦ C) and followed by reduction at higher temperature (900 ◦ C). In addition, the ultrasonic spray pyrolysis of ammonium meta-tungstate hydrate (AMT) was used for the production of WO 3 particles at 650 ◦ C in air. The HSC Chemistry® software package 9.0 was used for the analysis of chemistry and thermodynamic parameters of the processes for WS 2 powder synthesis. The crystalline structure and phase composition of all synthesized powders were analyzed by X-ray diffraction (XRD) measurements. The morphology and chemical composition of these samples were examined by scanning electron microscopy (SEM) combined with energy dispersive X-ray analysis (EDX).", publisher = "MDPI", journal = "Metals", title = "Synthesis of tribological WS 2 powder from WO 3 prepared by ultrasonic spray pyrolysis (USP)", volume = "9", number = "3", pages = "1-15", doi = "10.3390/met9030277" }
Gajić, N., Kamberović, Ž., Anđić, Z., Trpčevská, J., Plešingerova, B.,& Korać, M.. (2019). Synthesis of tribological WS 2 powder from WO 3 prepared by ultrasonic spray pyrolysis (USP). in Metals MDPI., 9(3), 1-15. https://doi.org/10.3390/met9030277
Gajić N, Kamberović Ž, Anđić Z, Trpčevská J, Plešingerova B, Korać M. Synthesis of tribological WS 2 powder from WO 3 prepared by ultrasonic spray pyrolysis (USP). in Metals. 2019;9(3):1-15. doi:10.3390/met9030277 .
Gajić, Nataša, Kamberović, Željko, Anđić, Zoran, Trpčevská, Jarmila, Plešingerova, Beatrice, Korać, Marija, "Synthesis of tribological WS 2 powder from WO 3 prepared by ultrasonic spray pyrolysis (USP)" in Metals, 9, no. 3 (2019):1-15, https://doi.org/10.3390/met9030277 . .